• 한국빅데이터학회지
• /
• 제4권1호
• /
• pp.39-51
• /
• 2019

초연결, 초지능을 특징으로 하는 4차 산업혁명이 태동하면서 사이버 물리 시스템이 눈앞에 다가온 가운데 사이버공간에서는 인간 생활에 대한 활동기록과 컴퓨터, 정보통신기기 뿐만아니라 사물인터넷과의 통신기록까지 막대한 양의 데이터가 매일 쏟아지고 있다. 3Vs로 대변되는 빅데이터는 국방분야에서도 적극적으로 활용되고 있는데 본 논문에서는 사이버공간에서의 군사작전을 효과적으로 수행될 수 있도록 하기 위한 빅데이터 거버넌스 모델을 제안하였다. 우리의 사이버공간 작전 임무를 구분하고 사이버공간에서 수집될 수 있는 빅데이터 유형을 분류한 후 빅데이터 거버넌스 이슈와 통합하여 빅데이터 거버넌스 프레임워크 모델을 구축하였다. 구축된 모델은 사례를 통하여 그 효용성을 증명하였으며 이를 통하여 국방분야에서 추진되는 빅데이터 활용방안에 기여한다.

• Smart Structures and Systems
• /
• 제20권5호
• /
• pp.619-636
• /
• 2017

Magnetorheological (MR) damper is a type of controllable device widely used in vibration mitigation. This device is highly nonlinear, and exhibits strongly hysteretic behavior that is dependent on both the motion imposed on the device and the strength of the surrounding electromagnetic field. An accurate model for understanding and predicting the nonlinear damping force of the MR damper is crucial for its control applications. The MR damper models are often identified off-line by conducting regression analysis using data collected under constant voltage. In this study, a MR damper model is integrated with a model for the power supply unit (PSU) to consider the dynamic behavior of the PSU, and then a real-time nonlinear model updating technique is proposed to accurately identify this integrated MR damper model with the efficiency that cannot be offered by off-line methods. The unscented Kalman filter is implemented as the updating algorithm on a cyber-physical model updating platform. Using this platform, the experimental study is conducted to identify MR damper models in real-time, under in-service conditions with time-varying current levels. For comparison purposes, both off-line and real-time updating methods are applied in the experimental study. The results demonstrate that all the updated models can provide good identification accuracy, but the error comparison shows the real-time updated models yield smaller relative errors than the off-line updated model. In addition, the real-time state estimates obtained during the model updating can be used as feedback for potential nonlinear control design for MR dampers.

• 디지털콘텐츠학회 논문지
• /
• 제19권2호
• /
• pp.293-300
• /
• 2018

본 연구에서 4차 산업 시대에서의 보안의 트랜드 변화와 보안위협, 4차 산업 시대의 보안 시스템 등 4차 산업 시대의 보안 시스템에 대해서 나타내었다. 4차 산업 시대는 ICT에서 IoT로 CPS보안으로 위협요소가 변화되며, 이에 따른 보안 패러다임 변화와 보안 시스템도 변화하여야 한다. 특히 CPS 보안을 해결하기 위해서는 환경적 보안과 관리적 보안이 더 중요하다. 4차 산업 시대 보안은 개별시스템에 대한 맞춤형 보안으로 변화하여야 제품 생산 설계에서 하드웨어와 소프트웨어가 융합된 보안 기술이 개발 초기부터 변화하여야 한다고 제안한다. 4차 산업의 보안 시스템은 네트워크와 같은 단일 시스템에서의 보안 시스템에서 개별시스템으로 다양한 기기들과 플랫폼들을 수용할 수 있는 보안 시스템으로 CPS 보안 시스템으로 설계 및 구현을 제안한다.

• 디지털융복합연구
• /
• 제19권8호
• /
• pp.241-247
• /
• 2021

도시 발전에 따른 부작용들을 해결하기 위한 한 방안으로 도시에 정보 통신 기술이 융합된 스마트 시티를 구축하고 있다. 스마트 시티 플랫폼은 스마트 시티 서비스의 개발 및 통합을 지원해야 한다. 따라서 스마트 플랫폼이 지원해야 하는 기반 기술과 기능적 및 비 기능적 요구 사항을 분석하였다. 스마트 시티 플랫폼이 지원하는 기반 기술로 사물 인터넷, 클라우드 컴퓨팅, 빅 데이터 및 사이버-물리 시스템의 4가지 범주로 분류하고 구현 가능한 기능적 및 비 기능적 요구 사항과 스마트 시티 플랫폼의 참조 모델을 도출했다. 스마트 시티 플랫폼의 참조 모델은 도시관리자에게 특정 도시 문제를 해결하기 위한 기능적 또는 비 기능적 요구 사항에 따른 기반 기술의 투자와 서비스 개발 범위에 대한 의사 결정에 활용하고. 플랫폼 개발자에게 스마트 시티 구축을 위한 소프트웨어 플랫폼의 기능적 및 비 기능적 요구 사항과 구현 기술을 식별하고 결정하는 가이드라인을 제공한다.

• 한국직업건강간호학회지
• /
• 제14권1호
• /
• pp.56-70
• /
• 2005

Objectives: The purpose of this study is to develop a linking model between industrial injury insurance organs and local organizations providing social welfare health services, for the activation of medical rehabilitation services for industrial injury patients. Method: Research design for this study was a multi-step research through literature review, field research, and group interviews with persons in charge, to compare local society-oriented medical rehabilitation programs. The term of researches Sep.1 ~ Nov. 30, 2004. Results: 1. Home nurses from Workers Accident Medical Corporation have been taken to be adequate to case managers, who link industrial accident insurance institutions to local society services for the activation of medical rehabilitation services for industrial injury patients. They have been chosen for case managers because they have richer understanding and experiences of objects of industrial accidents than any other specialists, and because they have proved to be able to provide direct home services as a specialist. We have established the center for case management affairs within the workers accident general hospital, organized the committee for case management with doctors in charge, doctors in rehabilitation, rehabilitation consultants, social welfare workers, physical therapists, and nurses, determined objects of case managements from those of long-term recuperation, and constructed a course of case management containing from case management plans to evaluation. 2. We have made files of community resources, and organized the council of industrial accident administration to have it in charge of the adjustment and linking of services in case management affairs. 3. Because there are inequality of community resources between areas, differences in experiences in and bases for linking, and disparity of core organizations with active linking in the system of linking between public and civil sectors, we have taken a system of linking between parallel organs to be the core. In our linking model, workers accident general hospital, hospitals designated for industrial injury, and rehabilitation hospitals are linked in parallel, inadequate long-term recuperation managers are trusted to an workers accident medical corporations through examination by the examination committee in Korea Labor Welfare Corporation, and are dealt with by the committee for case management. Of the hospitals designated for industrial accidents, those running a home caring center provide home caring services for the handicapped at home from industrial injury. 4. Workers Accident Medical Corporation take part in medical rehabilitation, and Korea Labor Welfare Corporation in vocational/social rehabilitation. Furthermore, in the model, the latter should construct a system for job opportunities through Internet portals and provide cyber vocational consultation and introduction. Conclusion: Improvement of systems is needed to apply the linking model to practical affairs. Because this model is centered for practical affairs, it should be put under the analysis of effects, and evaluation of its adequacy to practical application, and its effects and efficiency through experimental running in the 8 workers accident general hospital in Korea.

• 한국산학기술학회논문지
• /
• 제22권3호
• /
• pp.268-278
• /
• 2021

사물인터넷(IoT), 빅데이터(Big data), 인공지능(AI), 사이버물리시스템(CPS) 등 4차 산업혁명을 견인하는 기술들이 발전/보편화되고 있다. 이 기술들을 응용하여 다양한 산업 현장에서 생산성, 경제성, 안전성 등을 향상하고자 하는 요구가 확산되고 있다. 디지털트윈은 이러한 요구를 충족시키기 위한 중요한 기술 트렌드로서, 그리고 한국판 뉴딜의 10 대 과제 중 하나로 주목 받고 있다. 본 연구에서 구글 웹 검색기를 사용하여 논문, 매거진, 보고서, 기타 문헌을 탐색하였다. 디지털트윈 응용분야에서 공간정보의 기여 내용(또는 역할)을 조사하기 위해 디지털트윈의 정의·국내외 기업별 기술동향, 제조업·플랜트·스마트시티에서 요구되는 디지털트윈의 구성 요소와 디지털트윈 구동을 위한 핵심기술을 조사하였다. 그리고 공간 관련 키워드인 Geospatial Information, Geospatial data, Location, Map, Geodata와 디지털 트윈 간 연계 문장이나 낱말을 탐색하여 공간정보의 기여내용을 정리하였다. 조사 결과, 공간정보는 단순히 사물-사물-사람-프로세스-데이터-제품을 연결하는 매개체로서의 역할 제공뿐만 아니라 신뢰성 높은 의사결정지원·연계융합·위치정보제공·프레임워크 등의 역할을 수행함으로 디지털트윈의 활용 가치 극대화에 기여할 수 있을 것으로 나타났다.

• International Journal of Computer Science & Network Security
• /
• 제24권4호
• /
• pp.163-169
• /
• 2024

India is a developing nation and has come with comprehensive way in modernizing its reducing poverty, economy and rising living standards for an outsized fragment of its residents. The STEM (Science, Technology, Engineering, and Mathematics) education plays an important role in it. STEM is an educational curriculum that emphasis on the subjects of "science, technology, engineering, and mathematics". In traditional education scenario, these subjects are taught independently, but according to the educational philosophy of STEM that teaches these subjects together in project-based lessons. STEM helps the students in his holistic development. Youth unemployment is the biggest concern due to lack of adequate skills. There is a huge skill gap behind jobless engineers and the question arises how we can prepare engineers for a better tomorrow? Now a day's Industry 4.0 is a new fourth industrial revolution which is an intelligent networking of machines and processes for industry through ICT. It is based upon the usage of cyber-physical systems and Internet of Things (IoT). Industrial revolution does not influence only production but also educational system as well. IoT in academics is a new revolution to the Internet technology, which introduced "Smartness" in the entire IT infrastructure. To improve socio-economic status of the India students must equipped with 21st century digital skills and Universities, colleges must provide individual learning kits to their students which can help them in enhancing their productivity and learning outcomes. The major goal of this paper is to present a low cost, effective learning mechanism for STEM implementation using Raspberry Pi 3+ model (Single board computer) and Node Red open source visual programming tool which is developed by IBM for wiring hardware devices together. These tools are broadly used to provide hands on experience on IoT fundamentals during teaching and learning. This paper elaborates the appropriateness and the practicality of these concepts via an example by implementing a user interface (UI) and Dashboard in Node-RED where dashboard palette is used for demonstration with switch, slider, gauge and Raspberry pi palette is used to connect with GPIO pins present on Raspberry pi board. An LED light is connected with a GPIO pin as an output pin. In this experiment, it is shown that the Node-Red dashboard is accessing on Raspberry pi and via Smartphone as well. In the final step results are shown in an elaborate manner. Conversely, inadequate Programming skills in students are the biggest challenge because without good programming skills there would be no pioneers in engineering, robotics and other areas. Coding plays an important role to increase the level of knowledge on a wide scale and to encourage the interest of students in coding. Today Python language which is Open source and most demanding languages in the industry in order to know data science and algorithms, understanding computer science would not be possible without science, technology, engineering and math. In this paper a small experiment is also done with an LED light via writing source code in python. These tiny experiments are really helpful to encourage the students and give play way to learn these advance technologies. The cost estimation is presented in tabular form for per learning kit provided to the students for Hands on experiments. Some Popular In addition, some Open source tools for experimenting with IoT Technology are described. Students can enrich their knowledge by doing lots of experiments with these freely available software's and this low cost hardware in labs or learning kits provided to them.