• Journal of Sericultural and Entomological Science
• /
• v.39 no.2
• /
• pp.101-105
• /
• 1997

Most of the mulberry saplings in Korea have been produced by grafting. But the production of mulberry sapling by this method is very complex process and requires high level of technique and two years to produce saplings. Therefore, to develop the mulberry sapling production system by softwood cutting method which is suitable for mass production, several conditions on rooting and growth of cuttings were investigated. The rooting ability of cuttings varied according to mulberry varieties, showing the highest rooting ratio of 93.3% in cultivar of Shingwangppong. Of different soil texture as for rooting media, the clay was found to be the best; other media decreased in order as follows; sand, sand loam and vermiculite. The shading ratio by 70% with polyethylene film showed the highest rooting ratio of the cuttings. Optimum day of cutting was around 50th day after sprouting, whereas the ratio of stem thicker than 7mm at the base of saplings in diameter was highest at 44th day.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.166-170
• /
• 2012

Most of Cudriania tricuspidata Bureau saplings in Korea have been produced by crown division. But the production of Cudriania tricuspidata B. saplings by this method is very low in efficiency and in uniformity. Therefore, to develop Cudriania tricuspidata B. saplings production system by cutting method which is suitable for mass production, several conditions on rooting and growth of cuttings were investigated. The rooting ability of cuttings varied according to temperature on the bed, length, thickness of the hard wood cutting and rooting agent application. Of different concentration of rooting agent, the 5,000 ppm of 1-naphthalenacetic acid(NAA) and Indole butyric acid(IBA) were found to be the highest in rooting of hardwood cuttings; other concentration were in order as follows; 2,500, 1,000 and 10,000 ppm in concentration of rooting agents. The shading ratio of polyethylene film showed the highest rooting ratio of the softwood cuttings at 55%.

• Journal of Ecology and Environment
• /
• v.41 no.3
• /
• pp.66-71
• /
• 2017

Background: The sprouts of oak species play an important role in maintaining the oak community in a disturbed environment. In this study, we cut 1-year-old oak in three times during the 3 years and measured the sprout responses to know sprouting ability of six deciduous oaks in Korea. Results: Oak sprouts have appeared in spring and fall, and some of the sprouts had lifespan as short as a month. As the number of cutting increases, sprout number of Quercus acutissima increased whereas the other oak species decreased or died. The average number of sprouts over the 3 years was from 1.4 (Quercus mongolica) to 2.2 (Q. acutissima) per individual. Quercus serrata died after the second cutting, and Quercus dentata died after the third cutting. So, the two species have the lowest sprouting ability among six oak species. The sprouts grew actively during fall and slowly in summer. The sprout length during the 3 years was in the following descending order: Q. acutissima, Quercus aliena, Q. dentata, and Q. mongolica. Sprout of Q. acutissima and Q. aliena generated steadily over the 3 years, and sprout of Quercus variabilis and Q. mongolica was changed by year. After the 3 years, the number of sprouts increased only in Q. acutissima but sprout number of the other five oak species decreased. The sprout length of Q. acutissima, Q. aliena, and Q. variabilis increased, but sprout length of the other three oak species decreased. The average survival rate of saplings over the 3 years was in the following descending order: Q. acutissima, Q. aliena, Q. variabilis, and Q. mongolica. Conclusions: As a result, the sprouting ability of Q. acutissima was the highest. Such level of sprouting ability may be the evidence of how Q. acutissima community exists as a dominant species in a disturbed environment in lowlands of Korea peninsula.

• Journal of Korean Society of Forest Science
• /
• v.94 no.1 s.158
• /
• pp.6-10
• /
• 2005

This study was conducted to understand the dynamics of naturally regenerated seedlings and saplings in 28years after selective cutting at natural Korean pine-broadleaved forests in Mt. Changbai. The number of naturally regenerated tree species was 16 species in 28 years after selective cutting. The appearance rate of naturally regenerated tree species was 56 percentage and the early-successional tree species of Acer ukurunduense, Acer mono, Acer pseudosieboldianum, Prunus padus var. pubescens, and Maackia amurensis were found in the first 10 years after selective cutting. The seedlings and saplings of shade-tolerant tree species of Pinus koraiensis, Acer mandshuricum, Ulmus laciniata were appeared and the appearance rate was higher than 75% after 15 years while it showed little changes from 19 years after selective cutting. The distribution density of seedlings and saplings of regenerated tree species in selective cutting area was 5,500~6,100 trees per hectare in the first 10 years, and it increased gradually along with the restoration of disturbed area and it could reach 7,500 trees per hectare after 15 years.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.24-24
• /
• 2018

Degraded plantation forests are increasing because of unfavorable forestry conditions prevailing in Japan, including falling timber prices, increasing operational costs, and aging and declining forestry workforce. To remedy this situation, appropriate management strategy is required. This study introduces the challenges of Odai Town, Mie Prefecture that employed a new management strategy by evaluating site suitability for conifer forests and that proposes a new forest management regime of planting deciduous trees in unsuitable sites. The site suitability for conifer forests was evaluated from two aspects: the natural site conditions and the relationship among site conditions, growth, and damage by Anaglyptus subfasciatus Pic. in Cryptomeria japonica D. Don and Chamaecyparis obtusa Sieb. Et Zucc. forests. By analyzing the relationship among site conditions, growth, and insect damage based on field data obtained in plantation forests, growth evaluation and insect damage evaluation maps were developed. Based on the natural forest investigation, natural site condition maps for C. japonica and C. obtusa were established. Furthermore, by integrating these evaluation maps with the forest road maps showing the accessibility to the forest, the forest management regime for the whole plantation area of Odai Town was established. The forest management regime map indicates the sites suitable for forestry: suitable for long-rotation, short-rotation, and potential sites for short-rotation. The sites unsuitable for forestry were considered to be more suitable for broadleaved forests. Clear-cutting was conducted in a small area and different seral stage saplings (approximately 20 deciduous tree species) suitable to the site conditions were planted in an area of $80-120m^2$ protected by deer-fences. This might establish a forest composed of many species with a multilayer vertical forest structure in a short period. The planted saplings were distributed neither randomly nor uniformly to reflect the natural distribution of trees in the forest. A challenge to develop new products using the deciduous trees has started, such as wood chips for preparing smoked food, essential oil, and deodorizer. As these challenges have just begun, their effects on enhancing sustainable resource management are still being monitored. Even with the challenges, this regime can be of high value as a management strategy to remedy the situation of expansion of degraded forests in Japan.

• Journal of Sericultural and Entomological Science
• /
• no.11
• /
• pp.31-44
• /
• 1970

This experiment is conducted fer method cf bring to perfectly from defective cutting sapling 25 a production method of sapling which is to substitute for conventional graf ting. 1. In green wood cutting root comes out after 15 days of cutting with nearly straight development of root system; after 40 days of cutting, roots with total length of 1119 mms 43 roots, and 5.4 grs a root in total weight obtained. 2. Survival percentage of green wood cutting ranges between 56％ and 90％, average 73％ of that and it varies with natural characteristics of varietes. The results show variety of Gaeryang-Suban and Iljiroe with 80％ as a best ones in contrast with the variety of Shipyung. 3. The varietics or Gaeryang-Suban. Iljiroe, Suwon-Sang No.4, Rosang makes of much more roots than Yongchonchuwoo and Shipyung do. 4. Root ability made good number of roots commercially, when cutting is conducted soaking in 0.01 ％ NAA solution or 0.02％ NAA solution for 2 or 3 seconds as a chemical promoter. 5. Economical measures for increase of scion adapted 1) 2 scions from a green wood 50 cm long should be taken and basal pan of scion at its middle portion should be cut right under the node. 2) Scions below 50cm long may be used. Small scions or growthceased shoots h3ve also considerable root ability enough to be used. 3) Thus far, up 100,000 scions might be produced in 10 a. 6. We can find number of root increased, when cutting the opposite side in obliquity manner at 450. 7. When 110,000 saplings in 10 a. for the production of bring to perfectly from defective cutting sapling planted, quality of stocks does not go to bad condition without any obstacles in practical use. 8. Although the times or grafting delayed until middle of July, quality of sapling goes just a little down. Grafting may be conducted from early June to middle of July separately in several times, and the green wood of prunned mulberry in spring is available for a scion after end of June. 9. 10 grs weight of defective cutting sapling makes 95％ of complete sapling, otherwise 5 or 10 grs in weight of one becomes 80％ of complete sapling with its quality as similar as grafted one. 10. When the sapling planted, its branches should be cut, leaving 3 or 4 buds at the bottom of new branches. 11. In view of economical stand point, production cost of bring to perfectly from defective cutting sapling obtains 52％ of grafting cost.