• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.225-226
• /
• 2006

As the technique of high-speed end-milling is widely adopted to machining field. The investigation for microscopic precision of workpiece is necessary for machinability evolution. The environmental pollution has become a big problem in industry and many researcher have investigated in order to preserve the environment. The environmentally conscious machining and technology have more important position in machining process. In the milling process, the cutting fluid has greatly bad influence on the environment. The damaged layer affect mold life and machine parts in machining. In this study, the cutting force, the surface roughness, micro hardness and residual stress is evaluated according to machining environment. Finally, it is obtained that the characteristics of damaged layer in environmentally conscious machining is better than that in conventional machining using cutting fluid.

• 한국기계가공학회지
• /
• 제8권1호
• /
• pp.3-9
• /
• 2009

Recently, a high speed cutting is essential requirement to satisfy latest demand of high precision product and machining of hard materials. However heat generation by high speed rotation causes many problems. The machining error and shortening spindle lifetime by thermal stress is typical example. Generation of heat is mostly caused by sliding at the rotor and bearing. For minimization of heat generation at bearing, decision of the condition of proper lubrication is necessary. The thermal study about 40,000rpm spindle by changing the condition of oil-air lubrication method is carried out in this paper. The results of this paper can be used effectively in the decision of oil-air lubrication condition of other types of spindle for machine tools.

• Korean Membrane Journal
• /
• 제1권1호
• /
• pp.43-49
• /
• 1999

Separation of soluble oil was investigated during filtration of cutting oil emulsion using various commercial ultrafiltration membranes. The surface properties of membranes used were hydrophilic hydrophobic and modified surfaces by various surfactant pretreatments. Conditions varied include stirring speed transmeembrane pressure membrane type and surfactant type for pretreatment. The results give some indication of mechanisms occurring at the membrane surface. Surfactant pretreatments significantly improved water flux and UF flux of hydrophilic regenerated cellulose(up to 2.4x for YM100) and hydrophobic polysulfone (up to 2.2x for PTHK) membranes depending on surfactant type and operating conditions. The UF flux enhancement was attributed to membrane swelling and reduction of interfacial surface tension between oil droplets and membrane surface. unexpectedly the hydrophilic membranes revealed greater flux enhancement than the hydrophobic membranes. The results also showed a greater improvement in UF flux at lower operating pressure.

• 한국해양환경ㆍ에너지학회지
• /
• 제2권2호
• /
• pp.86-94
• /
• 1999

This paper describes a development of Collision/grounding Strength Assessment System (COSAS) using simplified method. This method is formulated in closed-form equation by taking into account crushing caused by bulbous bow collision and cutting caused by forward speed grounding. To verify the accuracy of the developed system, some examples for test models of double side/bottom structure in collision/grounding situation are considered. This system might be useful for analysis of structural damage of oil tankers in collision/grounding.

• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.351-358
• /
• 1993

Recently a high speed spindle system for machine tools has attracted considerable attention to reduce the machining time, to improve the machining accuracy, to perform the machining of light metals and hard materials and to unite the cutting and grinding processes. In this study, a high speed spindle system is developed by applying the oil-air lubrication method, angular contact ball bearings, injection nozzles with dual orifices and so on. And a lubrication experiment for evaluating the performance of the spindle system is carried out. Especially, in order to establish the lubrication conditions related to the development of a high speed spindle system, the effects of oil supply rate, rotational spindle speed and so on are studied and discussed on the bearing temperature rise, bearing temperature distribution and frictional torque. And the effect of spindle system structure on the bearing temperature distribution is investigated.

• 한국자원식물학회지
• /
• 제14권2호
• /
• pp.152-156
• /
• 2001

최근 중국에서 도입되어 경북 북부지방을 중심으로 재배면적이 확대되고 있는 백출의 재배기술확립 시험의 일환으로 화기제거가 생육과 수량에 미치는 영향을 구명하기 위하여 시험 수행 한 결과를 요약하면 다음과 같다. 1. 백출의 화기제거에 따른 지상부 생육은 무제거에 비해 화기제거에서 초장은 1.7∼2.5cm정도 화기가 제거된 만큼 짧았으며 엽의 크기, 경수와 경직경은 차이가 없었으나 지상부 생체중은 48∼60% 감소되었다. 2. 백출의 화기제거시기별 화기생체중은 화기제거시기가 늦어질수록 무거워져 개화직후에는 주당 39g으로 지상부 생 체 중의 60%를 차지 하였다. 3. 화기제거에 따른 지하부 생육은 무제거에 비해 화뢰출현기제거(7월 15일)와 개화전제거(8월 20일)에서 근경장, 근경직경 등이 컷으며 건근경수량도 유의하게 증수되었는데 화뢰출현기제거구는 290.5kg/10a으로 무제거구보다 40% 증수되어 가장 많았다. 4. 정유함량은 무제거구 0.71m1/50g에 비해 화뢰출현기제거는 12% 개화전 제거는 9%증가한 것으로 나타났으나 개화후 제거는 차이가 없었다.

• 대한기계학회논문집
• /
• 제10권1호
• /
• pp.131-137
• /
• 1986

본 논문에서는 도포하기가 용이한 극성유기물질인 magic ink( $C_{6}$ $H_{5-}$ CH/13+ $C_{6}$ $H_{4}$(C $H_{3}$)$_{2}$+ $C_{4}$ $H_{9}$OH+ $C_{6}$ $H_{12}$ $O_{2}$) 를 Rehbinper 효과가 큰 동에 도포하고, 공구경사각을 변화시켜 매 절삭깊이마다 반복 2차원절삭을 실시하여 절삭기구, 절삭저항의 변화, 전단면의 전단변형율, 전단에너지 및 마찰에너지등의 변화를 상호관련시켜 분석하므로서 절삭성의 향상원인을 규명코저 한다.다.

• 대한기계학회논문집A
• /
• 제38권8호
• /
• pp.887-892
• /
• 2014

일반적인 자기연마가공에서 브러쉬는 연마입자와 자성입자 그리고 약간의 절삭유가 혼합되어 형상을 갖춘다. 그러나 공구가 고속으로 회전하게 되면 대부분의 연마입자는 원심력의 증가로 공구에서부터 떨어져나간다. 이러한 현상은 가공 효율을 저하시키는 결과를 야기한다. 이러한 문제점을 해결할 수 있는 방법 중 하나는 절삭유 대신에 실리콘 겔과 같은 고점성의 물질을 사용하여 입자의 구속을 증가시키는 것이다. 연마입자의 과도한 탈락에 대응하는 또 다른 방법은 습식자기연마(WMAP)이다. 습식자기연마는 절삭유가 공작물의 표면에 충분히 공급된 상태의 자기연마를 의미한다. 본 연구에서는 습식자기연마에서 구속된 연마입자의 구속량과 표면거칠기 향상의 상관관계를 분석하였다. 그 결과 습식자기연마에서 연마입자의 구속률이 낮음에도 불구하고 표면거칠기가 더 많이 향상됨을 알 수 있었다.

• Safety and Health at Work
• /
• 제9권2호
• /
• pp.180-183
• /
• 2018

Background: This research investigates the degrees of slipperiness felt by the participants who walk on contaminants applied to a floor surface to decide degrees of slipperiness for various contaminants. Methods: For the experiment, 30 participants walked on a floor to which six contaminants were applied. All participants took the analytic hierarchy process (AHP)-based slipperiness questionnaire survey for the six kinds of contaminants, and the results were compared with the coefficient of friction. Results: The results of slip risk from the AHP indicate that grease is the most slippery of the six contaminants, followed by diesel engine oil, hydraulic oil, cooking oil, water-soluble cutting oil, and water in a decreasing order of slipperiness. When the results of slip risk from the AHP are compared with the static coefficient of friction for each contaminant, the order of slip risk follows the same trend. Although the results of slip risk from the AHP coincide with the static coefficient of friction, further study would be needed to investigate this relationship. Conclusion: This study will contribute as reference material for future research on preventing industrial accidents that result in falls from high places due to slipping.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제32권1호
• /
• pp.26-34
• /
• 2016

The present study was developed in order to evaluate the effect of five essential oils on the workers of the leaf-cutting ants; Atta sexdens rubropilosa and Acromyrmex subterraneus molestans by contact with a treated surface and ingestion with a treated leaves.. The essential oils of cinnamon, clove and mustard had generally more effective with 5, 10 and 15% concentrations after 24, 48, 72 and 96 h against workers of A. sexdens rubropilosa and A. subterraneus molestans in contact bioassay, but mustard was the most effective in ingestion bioassay on both species. On the other hand, there was no significant difference among the essential oils with 1% concentration and control after 24, 48 and 72 h of treatment in contact and ingestion bioassays against workers of A. sexdens rubropilosa . However, Andiroba oil had less efficiency values in all concentrations been used. Therefore, the essential oils of mustard, cinnamon and clove have contact and ingestion effects on workers of A. sexdens rubropilosa and A. subterraneus molestans, and may be promising on the leaf-cutting ant control.