• 한국기계가공학회지
• /
• 제17권6호
• /
• pp.68-74
• /
• 2018

Study on the Ti-6Al-4V have been carried out using cutting simulation, and researches for cutting force and chip shape prediction have been actively conducted under various conditions. However, a 3D printer application method using Ti-6Al-4V metal powder material as a high-power method has been studied for the purpose of prototyping, mold modification and product modification while lowering material removal rate. However, in the case of products / parts made of 3D printers using powder materials, problems may occur in the contact surface during tolerance management and assembly due to the degradation of the surface quality. As a result, even if a 3D printer is applied, post-processing through cutting is essential for surface quality improvement and tolerance management. In the cutting simulation, the cutting force and the chip shape were predicted based on the Johnson-Cook composition equation, but the shape of the shear type chip was not predictable. To solve this problem, we added a damaging term or strain softening term to the Johnson-Cook constitutive equation to predict chip shape. In this thesis, we applied the constant value of the S-K equations to the cutting simulation to predict the cutting force and compare with the experimental data to verify the validity of the cutting simulation and analyzed the machining characterization by considering conditions.

• 한국기계가공학회지
• /
• 제19권1호
• /
• pp.121-133
• /
• 2020

Underwater cutting has a different mechanism than dry cutting, and there are more restrictions than benefits. Due to these constraints, research and development of underwater cutting has been very limited. At present, reactor dismantling is emerging as an important task worldwide, and reactor pressure containers, a key part of the reactor, are decommissioned based on underwater cutting. Reactor pressure containers are high-level radioactive waste, which is one of the main goals of today, such as to bridge the gap between environmental, safety, and cutting performance; hence, a process suitable for cutting should be applied. Therefore, many studies are being conducted on underwater cutting in connection with the dismantling of nuclear reactors in various areas in order to find appropriate processes. This paper first introduces the core technology of underwater cutting processes and discusses various processes. The emphasis is then placed on the adequacy of the reactor dismantling application. More specifically, we examine the suitability for the mechanical and thermal cutting processes, respectively, to find a solution suitable for dismantling a reactor. We discuss how each solution can sufficiently perform the specified functions at each stage of reactor dismantling and suggest that these processes can perform all of the work of underwater cutting.

• 한국초지조사료학회지
• /
• 제9권3호
• /
• pp.129-134
• /
• 1989

This experiment was conducted to evaluate the effect of cutting frequency and nitrogen fertilization on th change of vegetation and the yield of dry matter on the different mixture combination of permanent pasture. 1. DM yield was increased as the increasing Arrhenatherum elntius but was decreased as the increasing Tkisetum fkavescens. 2. DM yield was unaffectdd by the different mixture combination of permanent pasture eventually. 3. In case of cutting frequency, 2-cutting showed higher DM yield than that of 3-cutting, and N-fertilization level showed significant increase in DM yield as the increasing N-level, especially 2-cutting block of N-3 showed the highest yield and 3-cutting block of N-l showed the lowest yield. 4. Mixture combination, N-level and cutting frequency did not show significant changes in DM yield of permanent pasture eventually.

• 유통과학연구
• /
• 제19권9호
• /
• pp.41-52
• /
• 2021

Purpose: Virtual reality is a unique technology to distribute data and demonstrates user's understanding towards complex products. The objective of this research is to investigate the impact of virtual reality on real world purchase intention of automotive cutting tools in Thailand's exhibitions. Hence, the research framework was constructed by telepresence, perception narrative, authenticity, trustworthiness, functional value, aesthetics, and purchase intention. Research design, data and methodology: Samples were collected from 500 visitors who participated in the selected top two metalworking exhibitions. Mix sampling approach is applied by using non-probability sampling methods of purposive or judgmental sampling, quota sampling, and convenience sampling method, respectively to reach target samples. Confirmatory Factor Analysis (CFA) and Structural Equation Model (SEM) were used to analyze and confirm goodness-of-fit of the model and hypothesis testing. Results: The results indicate that authenticity, functional value, and trustworthiness induced higher experiential value towards purchase intention. Those variables are stimulated by telepresence and perception narrative towards VR experience. Conclusions: Consumer's purchase intention towards VR experience on engineering cutting tools rely on consumer's sense of authenticity, trustworthiness, and functional value. Hence, marketing practitioners in automotive companies are encouraged to develop VR which focusing on significant factors to enhance consumers purchase intention.

• 한국산림과학회지
• /
• 제109권4호
• /
• pp.468-476
• /
• 2020

본 연구는 굴참나무 임분밀도관리도 개발을 통해 맹아갱신림의 경영목표별 벌기령을 예측하고자 하였다. 분석에 활용된 표준지 조사자료는 분석용 자료 603개소와 검증용 자료 113개소로 분류하였고, 이를 이용하여 임분밀도관리도의 개발과 적합도 검증을 실시하였다. 임분밀도관리도 구성 모델의 설명력(R2)은 등평균수고곡선식 0.732, 등평균직경곡선식 0.990으로 분석되었다. 재적 생산 최대 벌기령을 분석한 결과, ha당 900본의 맹아 잔존 시 42~44년으로 나타났고, ha당 1,800본을 잔존한 경우 38~42년으로 분석되었다. 3등급재 원목을 생산목표로 설정하였을 때의 벌기령은 지위지수 16일 때 25~28년이 소요되었고, 지위지수 14는 29~33년이 소요되는 것으로 나타났다. 본 연구의 결과는 굴참나무 맹아갱신 임분의 경영계획 수립에 있어서 기초자료로 활용될 수 있을 것으로 판단된다.

• 한국측량학회지
• /
• 제27권5호
• /
• pp.629-635
• /
• 2009

최근 이상기후로 인한 집중호우의 증가로 절개지 붕괴사고가 빈번하게 발생하고 있다. 절개지 붕괴사고는 재산 및 인명피해에 가장 큰 영향을 끼치고 있어 적극적인 대책마련과 관리체계가 시급한 편이다. 따라서 본 연구에서는 절개지의 효율적인 관리를 위해 절개지 위치기반의 형상조사기법에 대해 연구를 하였다. 기존의 핸드 GPS방법과 GPS보정항법시스템 인 SBAS신호를 활용한 DGPS방법의 비교분식을 실시하였다. 연구결과 기존의 방법의 경우 절개지의 정착한 형상파악에는 어려움이 있었으나 DGPS를 활용할 경우 사면의 형상파악 및 정확한 위치파악이 가능하였다. 따라서 기존에 포인트 위주의 사면관리에서 폴리곤기반의 절개지 관리가 가능하여 절개지 주변의 지형적인 여건을 고려한 절개지 방지대책 수립이 가능하다.

• 한국경영과학회지
• /
• 제40권3호
• /
• pp.23-38
• /
• 2015

In this paper, we evaluate the strength of three families of cutting planes for a lot-sizing problem. Lot-sizing problem is very basic MIP model for production planning and many strong valid inequalities have been developed for a variety of relaxations in the literature. To use three families of cutting planes in Branch-and-Cut framework, we develop separation algorithms for each cut and implement them in CPLEX. Then, we perform computational study to compare the effectiveness of three cuts for randomly generated instances of the lot-sizing problem.

• 한국경영과학회지
• /
• 제30권4호
• /
• pp.61-70
• /
• 2005

In this Paper, we develop an improved branch and bound algorithm for the (un)weighted unconstrained two-dimensional cutting problem. In the proposed algorithm, we improve the branching strategies of the existing exact algorithm and reduce the size of problem by removing the dominated pieces from the problem. We apply the newly Proposed definition of dominated cutting pattern and it can reduce the number of nodes that must be searched during the algorithm procedure. The efficiency of the proposed algorithm is presented through comparison with the exact algorithm known as the most efficient.

• 대한안전경영과학회지
• /
• 제3권1호
• /
• pp.117-125
• /
• 2001

Polyacetal resin is usually used to make molds, but it is difficult to achieve dimension accuracy during molding. Therefore it is usually necessary to cut the polyacetal resin after a molding process. Polyacetal resin is easily machining by standard machine tool. Acetal is also a thermal stable material which can be totted without coolant Another concern about the use of polyacetal resin is that it absorbs water easily, which also results in problems with dimension accuracy Therefore, in this study, the cutting resistance of water-absorbed polyacetal resin and its surface roughness after cutting in order to achieve the highest degree of accuracy in the cutting of polyacetal resin were investigated. Also, The Robust Design method uses a mathematical tool called orthogonal arrays to study a large number of decision variables with a small number of experiments. It also uses a new measure of quality, called signal-to-noise (S/N) ratio, to predict the quality from the customer's perspective. Thus, we have taken Taguchi's parameter design approach, specifically orthogonal array, and determined the optimal levels of the selected variables through analysis of the experimental results using S/N ratio.

• 한국초지조사료학회지
• /
• 제13권3호
• /
• pp.203-212
• /
• 1993

This experiments were carried out to estimate the optimum final cutting date in autumn and the selection of highly adaptable varieties in mountainous pastures of Taekwalyong area. The evaluations were based on the data of varietal differences of dry weight of plant(DW) and yield components of the 1st cutting as affected by various final cutting dates of last autumn. Nine varieties of tall fescue Barvetia, Fuego. Demeter, Safe. Barcel, Forager, Johnstone, Enforcer and Stef. were used and 4 final cutting date of autumn were $C_1$, cut on 30 Sept. $C_2$, on 14 Oct. $C_3$, on 28 Oct. and $C_4$. on 11 Nov.. respectively. The results obtained were as follows: I . Between the dry weight of plant(DM) and yield components of 1st cutting were different by various final cutting dates of autumn. The dry weight of plant(DW) was significantly positive correlated with heading characteristics of the 1st cutting in earlier cuttings($C_1- C_3$) of autumn, but there was not significant correlated with heading characteristics of the 1st cutting in the latest cutting($C_4$) of autumn. 2. The variety of Forager with heavier weight of heading tiller(HTW) and dry weight of tiller(WT) showed the highest dry weight of plant(DW) of the 1st cutting in earlier cuttings($C_1-C_3$) of autumn, whereas the variety of Barcel with high number of tillers per plant(NT) showed a high dry weight of plant(DW) of the 1st cutting in the latest cutting($C_4$) of autumn. 3. Optimum final cutting date and critical period of mountainous pastures in Taekwalyong area were estimated in late September($C_1$) and middle October($C_2$), sespectirety. 4. The dry weight of plant(DW) of the 1st cutting was significantly negative correlated with final cutting dates in growth period of autumn.