• 한국초지조사료학회지
• /
• 제8권1호
• /
• pp.14-19
• /
• 1988

본 실험은 가을에 파종하여 월동전 예취 높이를 달리 하였을 때 공식초종의 탄수화물함량변화, 월동성 및 다음해 봄철 수랑에 미치는 영향을 구명하기 위해 초종(Italian ryegrass, tall fescue, perennial ryegrass)을 주구로 하고 월동전 예취 높이 (무예취, 6cm, 15cm)를 세구로 하여 분활구배치 3반복으로 설계하여 수행한 결과는 다음과 같다. 1. 초종별 예취 높이에 따른 목장내 온도변화는 tall fescue > perennial ryegraa > Italian ryegrass 순으로 높게 나타났으나 예취 높이 간에는 일정하지 않았다. 2. 월동전 초종별 평균저장탄수화물 함량은 세초종 모두 무예취>15cm 예취>6cm 예취순으로 나타났으며 초종간에는 Italian ryegrass > perennial ryegrass > tall fescue 순으로 높게 나타났다. 한편 월동율은 초종간 예취 높이에 차가 없었다. 3. 생초수량에 있어서는 초종간에서 Italian ryegrass>perennial ryegraa>tall fescue 순으로 높게 나타나 유의성(P<0.05)이 나타났으나 건물수량에 있어서는 초종간, 예취 높이간 모두 유의성 (P>0.05)이 나타나지 않았다.

• 한국초지조사료학회지
• /
• 제37권3호
• /
• pp.201-207
• /
• 2017

Hay-making is one of the most common forage preservation practices in livestock operations. The objective of hay-making is to minimize nutrient loss by shortening field drying time. Measuring the impacts of cutting height of forage crop is necessary to optimize hay production balancing yield and quality, in order to obtain substantial biomass increase through harvest of regrowth. This experiment was conducted to investigate the impact of cutting height of rye (Secale cereale L.) on drying rate and hay quality. Heading stage rye was harvested at 8cm or 15cm stubble heights. Hay was daily tedded at 09:00 and sampled at 09:00, 13:00 and 17:00 to determine moisture content (MC). After two month of preservation, CP (crude protein), ADF (acid detergent fiber), NDF (neutral detergent fiber), IVDMD (in vitro dry matter disappearance), TDN (total digestible nutrient), RFV (relative feed value), DM (dry matter) loss, visual scores and total fungi count were determined for estimation of hay quality. Cutting height at 15cm could enhance the drying rate and CP content (p<0.05), but also increases DM loss (p<0.05) compared to cutting at 8cm. Cutting heights did not affect ADF, NDF, IVDMD, TDN and RFV value (p>0.05). Visual scores of rye hays cutting at 8cm and 15cm, ranged from 83 to 85. Cutting at 8cm tended to maintain higher core bale temperature and fungal count than cutting at 15cm during preservation, but there was no significant difference.

• 한국운동역학회지
• /
• 제25권3호
• /
• pp.311-322
• /
• 2015

Objective : The purpose of this study was to investigate the effects of landing height and knee joint muscle fatigue on the movement of the lower extremity during cutting after landing. Method : Subjects included 29 adults (age: $20.83{\pm}1.56years$, height: $172.42{\pm}9.51cm$, weight: $65.07{\pm}10.18kg$). The subjects were asked to stand on their dominant lower limb on jump stands that were 30 and 40 cm in height and jump from each stand to land with the dominant lower limb on a force plate making a side step cutting move at a $45^{\circ}$ angle with the non-dominant lower limb. The fatigue level at 30% of the knee extension peak torque using an isokinetic dynamometer. Results : The results showed that the difference of landing height increased maximum range of motion and angular velocity of hip, knee, and ankle joints in the sagittal plane, and in the angular velocity of motion of the hip joint in the sagittal plane. The maximum range of motion of the knee joint in the sagittal plane and the frontal plane decreased on landing from both heights after the fatigue exercise. The angular velocity of the hip joint in the sagittal plane, and the maximum range of motion of the hip joint in the transverse plane decreased for both landing heights after the fatigue exercise. The angular velocity of the hip joint in the frontal plane decreased for the 30 cm landing height after the fatigue exercise. On the other hand, the angular velocity and maximum range of motion of the ankle joint in the sagittal plane for both landing heights, and the angular velocity and maximum range of motion of the ankle joint in the frontal plane increased on landing from the 40 cm height after the fatigue exercise. Conclusion : Different landing heights of 30 and 40 cm and 30% fatigue of peak torque of knee extensor found a forefoot and stiff landing strategy, when cutting after landing. These results might be due to decline in the shock absorption capability of the knee joint and the movement capability related to cutting while increasing the contribution of the ankle joint, which may cause increased ankle joint injuries.

• 한국조경학회지
• /
• 제42권1호
• /
• pp.115-122
• /
• 2014

본 연구의 목적은 경기도 도로건설사업의 환경영향평가서를 대상으로 도로 건설시 절 성토 높이와 비탈면 높이와의 관계를 분석하고, 도로 건설사업 시 지형적 훼손을 최소화할 수 있는 합리적인 비탈면 높이 기준을 제시하는 데에 있다. 이를 위해 도로건설사업 환경영향평가서 내 비탈면 높이와 관련된 전문가 의견이 제시된 44개의 사례를 검토하고, 그 중에서 절 성토고 높이에 관해 언급된 23개의 사례를 추출하여 분석에 활용하였다. 본 연구의 결과를 요약하면 다음과 같다. 환경영향평가서 상에 제시된 대부분의 절 성토 높이 및 비탈면 높이는 기준 높이인 20~30m(성토 높이), 그리고 10~15m(절토 높이)를 초과하고 있으며, 도로변의 절 성토 높이가 비탈면의 높이와 높은 상관관계가 있다는 것을 보여주고 있다. 그리고 회귀분석 결과에 따르면 각각의 절 성토 높이는 절토 높이의 경우 25.33~33.23m, 성토 높이의 경우 14.56~18.08m로 나타났으며, 이러한 높이 기준은 일반적인 높이 기준보다 높은 것으로 나타나, 향후 환경영향평가서 검토 시에 충분히 고려되어야할 사항으로 판단된다. 본 연구는 환경영향평가서에 제시된 절 성토 높이 및 비탈면 높이만을 고려하고 있어, 실제 제안된 높이가 지형 훼손을 최소화할 수 있는지에 대한 검증은 불가능하였으며, 따라서 본 연구에서 제시된 높이 기준을 바탕으로 비탈면 높이에 대한 친환경성 검증을 위한 심층적인 연구가 진행될 필요가 있다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권7호
• /
• pp.1029-1035
• /
• 2005

A 3${\times}$4 factorial field experiment with a complete randomised split-plot design with four replicates was conducted from June 2002 to March 2003 at the experimental farm of the Nong Lam University, Ho Chi Minh City, Vietnam, to determine effects of different harvesting heights (10, 30 and 50 cm above the ground) and cutting intervals (45, 60, 90 and 285 days) on yield of foliage and tubers, and chemical composition of the foliage. Cassava of the variety KM 94 grown in plots of 5 m${\times}$10 m at a planting distance of 30 cm${\times}$50 cm was hand-harvested according to respective treatments, starting 105 days after planting. Foliage from the control treatment (285 days) and all tubers were only harvested at the final harvest 285 days after planting. Dry matter and crude protein foliage yields increased in all treatments compared to the control. Mean foliage dry matter (DM) and crude protein (CP) yields were 4.57, 3.53, 2.49, and 0.64 tonnes DM $ha^{-1}$ and 939, 684, 495 and 123 kg CP $ha^{-1}$ with 45, 60, 90 and 285 day cutting intervals, respectively. At harvesting heights of 10, 30 and 50 cm the DM yields were 4.27, 3.67 and 2.65 tonnes $ha^{-1}$ and the CP yields were 810, 745 and 564 kg $ha^{-1}$, respectively. The leaf DM proportion was high, ranging from 47 to 65%. The proportion of leaf and petiole increased and the stem decreased with increasing harvesting heights and decreasing cutting intervals. Crude protein content in cassava foliage ranged from 17.7 to 22.6% and was affected by harvesting height and cutting interval. The ADF and NDF contents of foliage varied between 22.6 and 30.2%, and 34.2 and 41.2% of DM, respectively. The fresh tuber yield in the control treatment was 34.5 tonnes $ha^{-1}$. Cutting interval and harvesting height had significant negative effects on tuber yield. The most extreme effect was for the frequent foliage harvesting at 10 cm harvesting height, which reduced the tuber yield by 72%, while the 90 day cutting intervals and 50 cm harvesting height only reduced the yield by 7%. The mean fresh tuber yield decreased by 56, 45 and 27% in total when the foliage was harvested at 45, 60 and 90 day cutting intervals, respectively. It is concluded that the clear effects on quantity and quality of foliage and the effect on tuber yield allow alternative foliage harvesting principles depending on the need of fodder for animals, value of tubers and harvesting cost. An initial foliage harvest 105 days after planting and later harvests with 90 days intervals at 50 cm harvesting height increased the foliage DM and CP yield threefold, but showed only marginal negative effect on tuber yield.

• 한국초지조사료학회지
• /
• 제14권4호
• /
• pp.295-306
• /
• 1994

The object of this experiment was to suggest the suitable cutting frequency and cutting height for orchardgrass (0G)-red clover(RC) mixtures under the intensive system of short-term pasture utilization. The fields trials were conducted over 3-year period(1991-1993) to evaluate dry matter yield, botanical composition, chemical composition and CP, DDM yield on the cutting frequency (30, 40 and 50 days) and cutting height(5, 7 and 9cm) With decreasing the cutting frequency, the DM yield of OG in the OG-RC mixtures was significantly increased(P

• 한국초지조사료학회지
• /
• 제8권3호
• /
• pp.135-140
• /
• 1988

본 시험은 林間草地에서 연간 예측회수(3,4,5回)와 예취높이 (3,6,9cm)가 목초의 生育과 收量 및 초지地植生에 미치는 영향을 究明하여 임간초지의 생산량증대와 이용年限延長을 위한 기초자료를 얻고자 실시되었으며, 林間地의 조건은 南向인 소나무 지대로 選光程度는 30%였다. 연간 예취回數별 乾物收量은 4회 예취구(6097kg), 3회 예취구 (5953kg) > 5회 예취구 (5305kg/ha)순이였으나, 館料價植를 고려한 수량차이는 크지 않을 것으로 사료된다. 예취높이별 乾物수량은 예취회수에 관계없이 예취높이가 3,6,9cm로 높아짐에 따라 有意的으로 증가하였으며 (P

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권1호
• /
• pp.31-34
• /
• 2006

The experiment was conducted to determine the effects of cutting interval and cutting height on the yield and nutrient composition of hedge lucerne (Desmanthus virgatus) when grown on a sandy soil in the Northeast of Thailand. The cutting intervals compared were 30, 40 and 50 days between harvests and the cutting heights 30, 40 and 50 cm above ground level. The experiment was a $3{\times}3$ factorial layout in a randomized complete block design with 4 replications-giving a total of 36 plots each $3{\times}3m^2$. Harvested plant material was weighed, dried and the ground subsamples taken for analyses of crude protein (CP), crude fiber (CF), ash, ether extract (EE) and nitrogen-free extract (NFE). At the last harvest the hedge lucerne samples were separated to determine leaf to stem ratios and then analyzed for nutrient composition in the leaf and stem. Results showed that increasing the cutting interval (i.e. advancing age of maturity) increased dry matter and nutrient yields significantly. In terms of nutrient content, it also increased the crude fiber, ash, ether extract and nitrogen free extract percent in the plant. However, crude protein percent was markedly decreased as the cutting interval increased. Increasing cutting height had no effect on dry matter yield and yields of nutrients, but in terms of nutrient content, it increased crude protein and ash content, but decreased crude fiber content. The percent EE and NFE in the plant was unaffected by cutting height. From the results presented it is clear that cutting a stand of hedge lucerne every 40 to 50 days will achieve greater dry matter and nutrient yields than cutting more frequently, at 30 days. The cutting height at harvest, whether 30, 40 or 50 cm above ground level had no effect on dry matter or nutrient yields of hedge Lucerne. Hedge lucerne therefore offers the Thai poultry farmer a useful alternative protein supplement for poultry diets rather than relying on the more expensive soybean meal. As it can be readily and successfully grown on a range of soil types and climates throughout Thailand, hedge lucerne also offers the Thai farmer a valuable additional source of income.

• 한국초지조사료학회지
• /
• 제17권4호
• /
• pp.387-398
• /
• 1997

This experiment was to investigate the surface coverage, sward height and dry matter yield of 63 perennial ryegrass cultivars with control cultivar, orchardgrass(Potomac) at different cutting dates(May 25, July 5, August 20 and October 5), in order to select the adaptable cultivars of perennial ryegrass in the middle region of Korea. Four perennial ryegrass cultivars, E.V. Meadea, Aberystwyth S101, Raidor and Real, didn't survive afler sowing. Surface coverage of perennial ryegrass cultivars cut in August 20 was lower than others. Sward height of perennial ryegrass cultivars at each cutting dates was lower than that of orchardgrass. There were no significant differences in sward heights of each cutting date. Dry matter yield of perennial ryegrass cultivars cut in August 20 was lower than others. Total dry matter yield of Oakpark 6% Viktoria, Petra, G. Manawa, and Kangaroo Valley was fell in the range of 11.76 and 10.37t/ha while that of orchardgrass was 12.09t/ha. On the basis of total annual dry matter yield, the adaptability of perennial ryegrass cultivars was classfied as following.

• 화훼연구
• /
• 제18권1호
• /
• pp.33-37
• /
• 2010

겹꽃으로 개화하는 한국자생 산수국(Hydragea serrata for. acuminata)을 분화용 식물로 개발하기 위하여 알맞은 삽목시기를 구명하고 월별 삽목시기가 이듬해의 생육과 개화에 미치는 영향을 구명하고자 하였다. 본 실험은 2008년 3월부터 9월까지 매월 10일날에 직경 15cm 크기의 화분에 직접 삽목을 하여 재배한 결과, 초장은 5월에 삽목한 것이 31.7cm로서 가장 컷고 그 다음이 4월과 7월에 삽목한 것 이었으며 8월과 9월에 삽목한 것은 각각 23.6cm와 22.0cm로서 비슷하였다. 그러나 6월에 삽목한 것은 비정상적으로 작았고 생육도 매우 부진하였다. 잎은 8월 이후에 삽목했을때에 엽폭이 좁아지고 엽장도 짧아져서 엽면적이 감소되었으며 엽병장 또한 짧아졌으나 착엽수는 변화가 없었다. 주당 꽃송이의 수는 5월에 삽목한 것이 4송이로서 가장 많았고 7월부터 9월 사이에 삽목한 것은 3송이가 피었으며 6월에 삽목한 것은 1송이가 착화 되어서 가장 적었다. 화관의 크기는 5월에 삽목한 개체가 직경 10.3cm로서 가장 컷으며 7월이후부터는 삽목시기가 늦어질수록 화관의 크기가 감소되었다. 착화수나 꽃의 크기, 소화의 수 등의 개화 상태는 5월에 삽목한 것이 가장 양호하였고 6월에 삽목한 것이 가장 저조하였다. 그러나 8월과 9월에 삽목을 실시하더라도 이듬해에 관상가치가 있는 정상적인 꽃모양을 가진 꽃이 피었으나 개화시기는 약간 늦어졌다.