• International Journal of Precision Engineering and Manufacturing
• /
• 제6권1호
• /
• pp.65-72
• /
• 2005

Drilling process is one of the most common, yet complex operations among manufacturing processes. The performance of a drill is largely dependent upon drilling forces, Many researches focused on the effects of drill parameters on drilling forces. In this paper, an effective theoretical model to predict thrust and torque in drilling is presented. Also, with the predicted forces, the stress analysis of the drill tool is performed by the finite element method. The model uses the oblique cutting model for the cutting lips and the orthogonal cutting model for the chisel edge. Thrust and torque are calculated analytically without resorting to any drilling experiment, only by tool geometry, cutting conditions and material properties. The stress analysis is performed by the commercial FEM program ANSYS. The geometric modeling and the mesh generation of a twist drill are performed automatically. From the study, the effects of the variation of the geometric features of the drill and of the cutting conditions of the drilling on the drilling forces and the stress distributions in the tool are calculated analytically, which can be applicable for designing optimal drill geometry and for improving the drilling process.

• 한국정밀공학회지
• /
• 제18권11호
• /
• pp.74-79
• /
• 2001

In this two-part paper, a virtual machine tool (VMT) is presented. In part 1, the analytical foundation of a virtual machining system, envisioned as the foundation for a comprehensive simulation environment capable of predicting the outcome of cutting processes, is developed. The VMT system purposes to experience the pseudo-real machining before real cutting with a CNC machine tool, to provide the proper cutting conditions for process planners, and to compensate or control the machining process in terms of the productivity and attributes of products. The attributes can be characterized with the machined surface error, dimensional accuracy, roughness, integrity and so forth. The main components of the VMT are cutting process, application, thermal behavior and feed drive modules. In part 1, the cutting process module is presented. The proposed models were verified experimentally and gave significantly better prediction results than any other method. The thermal behavior and feed drive modules are developed in part 2 paper. The developed models are integrated as a comprehensive software environment in part 2 paper.

• 한국터널지하공간학회 논문집
• /
• 제15권3호
• /
• pp.225-235
• /
• 2013

TBM의 암반 굴착도구인 디스크커터의 작용력은 TBM의 설계와 굴진성능 평가를 위해 핵심적인 항목이다. 본 연구에서는 디스크커터 링의 형상에 따른 디스크커터 작용력의 차이를 실물 선형절삭실험에 의해 실험적으로 분석하였다. 또한 절삭실험 중에 발생하는 커터 링의 변형률을 계측하여 커터 링의 강성을 추정하였다. 분석결과, V형상의 디스크커터를 사용하게 되면 동일한 절삭조건에서 커터 관입깊이를 증가시킬 수는 있지만, 커터의 회전방향으로 큰 응력이 작용하는 것으로 나타났다. 또한 커터 작용력을 예측모델에 의해 추정할 경우에는, 디스크커터의 형상과 관련된 변수들을 고려할 수 있는 모델을 사용하는 것이 타당함을 알 수 있었다.

• International Journal of Precision Engineering and Manufacturing-Green Technology
• /
• 제5권5호
• /
• pp.593-604
• /
• 2018

Laser-assisted machining (LAM) is known to be an effective and economical technique for improving the machinability of difficult-to-machine materials. In the LAM method, material is preheated using a laser heat source and then the preheated area is removed by following cutting tool. For laser-assisted turning (LAT), the configuration of the system is not complicated because laser irradiates from a fixed position. In contrast, laser-assisted milling (LAMill) system is not only complicated but also difficult to control because laser heat source must always move ahead of the cutting tool along a three dimensional (3D) tool path. LAMill is still early stage and cannot yet be used to machine finished products with 3D shapes. In this study, a laser-assisted fillet milling process was developed for machining 3D shapes. There are no prior studies combining fillet milling and LAMill. Laser-assisted fillet milling strategy was proposed, and effective depth of cut (EDOC) was obtained using thermal analysis. Experiments were designed using response surface method and cutting force prediction equations were developed using statistical analysis and regression analysis. The optimum machining conditions were also proposed, and energy efficiency of the LAMill was analyzed by comparing the specific cutting energy of conventional machining (CM) and LAMill.

• Structural Engineering and Mechanics
• /
• 제86권1호
• /
• pp.119-137
• /
• 2023

The purpose of this research is to assess the performance of CBN and ceramic tools during the dry turning of gray cast iron EN GJL-350. During the turning operation, the variable machining parameters are cutting speed, feed rate, depth of cut and type of the cutting material. This contribution consists of two sections, the first one deals with the performance evaluation of four materials in terms of evolution of flank wear, surface roughness (2D and 3D) and cutting forces. The focus of the second section is on statistical analysis, followed by modeling and optimization. The experiments are conducted according to the Taguchi design L₃₂ and based on ANOVA approach to quantify the impact of input factors on the output parameters, namely, the surface roughness (Ra), the cutting force (Fz), the cutting power (Pc), specific cutting energy (Ecs). The RSM method was used to create prediction models of several technical factors (Ra, Fz, Pc, Ecs and MRR). Subsequently, the desirability function approach was used to achieve a multi-objective optimization that encompasses the output parameters simultaneously. The aim is to obtain optimal cutting regimes, following several cases of optimization often encountered in industry. The results found show that the CBN tool is the most efficient cutting material compared to the three ceramics. The optimal combination for the first case where the importance is the same for the different outputs is Vc=660 m/min, f=0.116 mm/rev, ap=0.232 mm and the material CBN. The optimization results have been verified by carrying out confirmation tests.

• 한국터널지하공간학회 논문집
• /
• 제25권3호
• /
• pp.221-243
• /
• 2023

국내 도심지 터널 공사에서 발파로 인한 진동 및 소음 방지를 위한 대안으로 로드헤더 공법 적용사례가 늘고 있다. 그러나 국내의 암반 대상 로드헤더 적용사례가 극히 적어 로드헤더 장비선정과 굴착효율 평가에 한계가 있다. 특히 로드헤더 굴착효율 평가를 위해 현재는 해외 현장에서 경험적으로 개발된 모델식을 적용하고 있으나 국내 암종 및 지질조건에 대한 검증이 부족한 실정이다. 본 연구에서는 해외 문헌 연구를 통하여 로드헤더 장비사양 결정방법과 굴착효율 평가 모델을 조사하였다. 이를 바탕으로 국내 현장 대상 장비선정을 위한 사양 검토와 더불어 현장 대상 암석강도와 굴착효율의 상관모델식을 제안하고 설계 굴착효율 예측 모델과 비교하였다. 또한 로드헤더 절삭이론 모델식을 이용한 굴착효율 산정의 간편법을 제안함으로써 굴착효율을 평가하고 기존 경험적 예측 모델과 비교 검증하였다.

• 한국기계가공학회지
• /
• 제3권1호
• /
• pp.7-14
• /
• 2004

Machining error is defined the normal distance between designed surface and actual tool path with tool deflection. This is inevitably caused by the tool deflection, tool wear, thermal effect and machine tool errors and so on. Among these factors, tool deflection is usually known as the most significant factor of machining error. Tool deflection problem is analyzed using Instantaneous horizontal cutting forces. The high quality and precision of machining products are required in finishing. In order to achieve these purposes, it is necessary work that decrease the machining error. This paper presents a study on the machining error caused by the tool deflection in ball end milling of 2 dimensional surface. Tool deflection model and simple machining error prediction model are described. This model is checked the validity with machining experiments of 2 dimensional surface. These results may be used to decrease machining error and tool path decision.

• 한국기계가공학회지
• /
• 제10권4호
• /
• pp.1-7
• /
• 2011

The mode analysis of end-milling was introduced using recursive parametric modeling. Also, a numerical mode analysis of FRF in end-milling at different conditions was performed systematically. In this regard, a REIVM(recursive extended instrumental variable method) modeling algorithm was adopted and natural modes of real and imaginary part were discussed. This recursive approach can be used for the on-line system identification and monitoring of an end-milling for this purpose. For acquiring a cutting force, an experimental practice was performed. And these end-milling forces were used for the calculation of FRF(Frequency response function) and its mode analysis. Also, the FRF was analysed for the prediction of end-milling system. As a results, this algorithm was successful in each condition for the detection of natural modes of end-milling. After numerical analysis of the FRF, the tooth passing frequency was discriminated in their FRF, power spectrum and mode calculation.

• 한국생산제조학회지
• /
• 제9권2호
• /
• pp.96-101
• /
• 2000

In machining with cutting tool inserts having complex chip groove shape the flow curl and breaking pattern of the chip are different than in flat-face inserts. In the present work an effort is made to understand the three basic phe-nomena occurring in a chip since its formation in machining with groove type and pattern type inserts. These are the ini-tial chip flow the subsequent development of up and side curl and the final chip breaking due to the development of tor-sional and bending stresses. in this paper chip flow angle in a groove type and pattern type inserts. The expres-sion for chip flow angle in groove type and pattern type inserts is also verified experimentally using high speed filming techniques.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.47-51
• /
• 1997

The high speed machining which can improve the production and quality in machining has been adopted remarkably in dietmold industry. As the speed of machine tool spindle increases, the machinability evaluation and monitoring of high speed machining is necessary. In this study, the machinability of 30, 000rpm class spindle was evaluated by using the developed tool dynamometer and the machining properties of high hardened and toughness materials in high speed were examined. Finally, the in-process monitoring technologies of tool wear were presented through the prediction by the experimental formula and pattern recognition by the neural network.