• Steel and Composite Structures
• /
• 제36권4호
• /
• pp.417-426
• /
• 2020

Drilling processes in fiber-reinforced polymer composites are essential for the assembly and fabrication of composite structural parts. The economic impact of rejecting the drilled part is significant considering the associated loss when it reaches the assembly stage. Therefore, this article tends to illustrate the effect of cutting conditions (feed and speed), and laminate thickness on thrust force, torque, and delamination in drilling woven E-glass fiber reinforced epoxy (GFRE) composites. Four feeds (0.025, 0.05, 0.1, and 0.2 mm/r) and three speeds (400, 800, and 1600 RPM) are exploited to drill square specimens of 36.6×36.6 mm, by using CNC machine model "Deckel Maho DMG DMC 1035 V, ecoline". The composite laminates with thicknesses of 2.6 mm, 5.3 mm, and 7.7 mm are constructed respectively from 8, 16, and 24 glass fiber layers with a fiber volume fraction of about 40%. The drilled specimen is scanned using a high-resolution flatbed color scanner, then, the image is analyzed using CorelDraw software to evaluate the delamination factor. Multi-variable regression analysis is performed to present the significant coefficients and contribution of each variable on the thrust force and delamination. Results illustrate that the drilling parameters and laminate thickness have significant effects on thrust force, torque, and delamination factor.

• 한국의류산업학회지
• /
• 제2권2호
• /
• pp.150-158
• /
• 2000

This study investigated mechanical properties, drape coefficients and node indices of stretch fabrics. We applied mechanical properties to exhibited tailorability control in HESC and evaluated making-up. The mechanical properties such as tensile, bending, shearing, compression, surface characteristic values, thickness and weight were measured by the KES-F system and drape coefficient by drape tester. The summarized results of this study were as follows; First, stretch fabrics, almost, shown high stretch in weft inserted polyurethane yarn fabric and had a ${\pm}2{\sigma}$(sigma) range of shearing, compression, surface and thickness, except bending and weight, as compared with Japanese women's thin dress fabrics. Second, bending had a positive correlation in stiffness, anti-drape and flexibility & softness. Shearing had a negative correlation in crispness and scroop. Surface properties had a high contribution in fullness & softness. Third, The drape coefficient was found by measuring the mechanical properties according to the obtained regression equation. Forth, many problems are expected in overfeed and cutting operations in sewing process. In the decision of the good external appearance using TVA, only 26 of 55 samples are included in the range of the good external appearance. Fifth, in the regard of the result for sewing control, warp values are not necessary to control in the all kind of items. But weft value in the RT and EM are out of non-control zone. So we need a special management during sewing process.

• 한국산학기술학회논문지
• /
• 제10권1호
• /
• pp.39-45
• /
• 2009

디스플레이 장치에서 기존의 CRT는 곡면이며 무겁고 큰 부피 때문에 LCD, PDP와 같은 평판디스플레이(FPD)로 대체되고 있다. FPD는 $0.6{\sim}0.8mm$ 두께의 대면적 글래스에 여러 공정을 거친 후에 최종 제품 규격으로 절단하여 제작하기 때문에 글래스의 면적이 크면 클수록 FPD의 생산성이 높다는 밀접한 관계를 갖는다. 따라서 FPD 제조 업계에서는 글래스 면적을 증가시키기 위하여 노력하고 있다. 7세대 글라스($2,220mm\;{\times}\;1,870mm\;{\times}\;0.7mm$)를 대상으로 유한요소해석 및 유동해석을 통하여 이송장치, 배급장치, 수평/경사 변환장치 및 제어장치로 구성된 비접촉 공기부상 이송시스템을 개발하였다. 본 개발에서 확보한 설계기술을 통하여 글라스의 크기가 대형화 되더라도 관련 이송장비를 보다 쉽게 제작하여 적용할 수 있다.

• 한국항해항만학회지
• /
• 제38권6호
• /
• pp.623-627
• /
• 2014

최근에 인체 중심의 무선통신 기술에 대한 관심이 증가하면서 입을 수 있는 안테나에 대한 연구가 활발히 진행되고 있다. 본 논문에서는 GPS 주파수를 수신할 수 있는 입을 수 있는 안테나를 제안하였다. 두께 0.7mm의 염소가죽을 유전체 기판으로 사용하고, 두께 0.08mm의 구리 폴리에스터 천을 방사체 및 접지판으로 사용하여 안테나를 제작하였다. 원형 편파 특성을 얻기 위해 정사각형의 패치에 대각선 방향에 놓인 모서리를 짤라서 방사체를 만들었고, 도전성 천과 가죽을 에폭시를 사용하여 접착하였다. 먼저 염소가죽의 유전율을 구하기 위해 크기가 다른 3개의 정사각형 패치 안테나를 만들고, 실험 및 시뮬레이션을 통해 염소가죽의 유전상수를 구하였다. 이것을 바탕으로 GPS 대역에서 동작하는 안테나를 설계하고, 제작하여 실험을 통해 안테나의 성능을 검증하였다. 옷의 어깨 부분에 설치하여, 사람이 입고 측정하여 특성의 변화를 실험하였고, 상용 세라믹 GPS 안테나와 수신 감도 특성을 비교하여 제작된 안테나가 비슷한 수준의 감도를 갖고 있음을 확인하였다.

• Journal of Welding and Joining
• /
• 제17권3호
• /
• pp.79-89
• /
• 1999

The study was carried out to examine in more detail metallurgical and mechanical properties of brazed joints of diamond cutting wheel. In this work, shank(mild steel) and sintered bronze-base tips were brazed with three different filler materials(W-40, BAgl and BAg3S). The machine used in this work was a high frequency induction brazing equipment. The joint thickness, porosities and microstructure of brazed joints with brazing variables(brazing temperature, holding time) were evaluated with OLM, SEM, EDS and XRD. Bending(torque) test was also performed to evaluate strength of brazed joints. Further wetting test was performed in a vacuum furnace in order to evaluate the wettability of filler metals on base metals9shank and tips). The brazing temperature had a strong influence on the joint strength and the optimum brazing temperature range was about $700~850^{\circ}C$ for the bronze/steel combinations. The strength of the brazed joint was found to be influenced by the three factors : degree of reaction region, porosity content, joint thickness. The reaction region was formed in the bronze-base tip adjacent to the joint. The reaction region resulted in a bad influence on the strength due to the formation of Cu5.6Sn, CuZn4, $\beta(CuZn)$ and CdAg, etc. Porosities increased as brazing variables(brazing temperature, holding time) increased, and the brazed joints with porosities of less than about 3-5% had an optimum strength for the bronze-base tip.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제48권5호
• /
• pp.292-296
• /
• 2022

Objectives: During Le Fort I osteotomy, the separation of the pterygomaxillary junction (PMJ) is a difficult procedure for most surgeons because it is invisible. In this process, damage to the posterior structures constituting the sinus or those adjacent to it, including the maxillary sinus posterior wall and pterygoid plate, may occur. We would like to investigate the effects of this on the inside of the maxillary sinus after surgery and whether there are complications. Materials and Methods: One-hundred patients who underwent Le Fort I osteotomy from 2013 to 2020 using cone-beam computed tomography images were classified into two groups (clean-cut type and fractured type) according to the PMJ cutting pattern. In addition, the mucosal thickness in the maxillary sinus was divided into preoperative, postoperative three months, one year, and the change over the course of surgery was evaluated retrospectively. Results: Of the total 100 cases, the clean-cut type numbered 28 cases and the fractured type totaled 72 cases. Among the fracture types, part of the sinus wall and the pterygoid plate were broken in 69 cases, and the maxillary sinus posterior wall was detached in three cases. There was no statistically significant difference in sinus mucosal thickening between the clean-cut type and fractured type of the PMJ, three months and one year after surgery between the two groups. However, there was a significant difference in sinus mucosal thickness at postoperative one year in the case where a partial detachment of the maxillary sinus posterior wall occurred compared to not. Conclusion: Even if there is some damage to the structures behind the PMJ, it may not be reasonable to spend some time on the PMJ separation process considering the overall postoperative complications, if there is no significant difference inside the sinus, or increased probability of postoperative complications.

• 화약ㆍ발파
• /
• 제40권4호
• /
• pp.35-46
• /
• 2022

오래된 산업단지를 해체하고 해체한 산업부지를 원래의 자연환경으로 복원하는 공사가 진행 중인 가운데, 본 논문에서는 노후화된 산업단지 내의 대형 철골구조물 중 하나인 터빈동을 발파해체공법 중 점진붕괴공법을 적용하여 해체한 사례를 소개한다. 터빈동을 절단 해체하기 위해 금속 제트가 발생하는 장약용기를 사용하였다. 발파구간 중 절단 두께가 두꺼운 부분은 가스와 산소 불꽃 또는 아크열에 의해 깊은 홈을 파는 방법인 가우징을 적용하여 절단 두께를 30mm 이하로 조절하였다. 터빈동 발파해체에 사용한 총 장약량은 175kg, 전자뇌관 165발, 장약용기 124개이다. 발파해체 결과, 터빈동은 예측한 방향으로 붕괴하였으며, 주변 시설물에 피해 없이 발파해체를 완료하였다.

• 대한안과학회지
• /
• 제59권11호
• /
• pp.1017-1023
• /
• 2018

목적: 최근 펌프조절장치와 발판의 반응속도가 빨라지고 자동막힘감지(automatic occlusion sensing) 기능이 향상되어 수술 중 흡입력과 절단력을 향상시킨 수정체유화장치가 소개된 바 있다. 본 연구에서는 수정체유화술 시행 중 여러 매개변수를 비교하여 기기의 반응속도 향상과 자동막힘감지 기능이 수정체유화술의 임상결과에 미치는 영향을 비교하고자 하였다. 대상과 방법: 단일 술자에게 수정체유화술을 시행받은 68명의 백내장 환자, 총 80안이 본 연구에 포함되었다. 기존의 기기(WhiteStar $Signature^{(R)}$ system)를 사용하여 초음파유화술을 시행한 40안을 대조군으로 하였으며, 반응속도 향상 및 자동막힘감지 기능 효과를 분석하기 위해서 향상된 기기(WhiteStar $Signature^{(R)}$ PRO system)를 사용하여 초음파유화술을 시행한 40안을 실험군으로 정하였다. 두 군 모두에서 수술 중 parameter of effective phaco time with a specific coefficient for the transversal movement expressed in seconds (EFX), 총 초음파 사용시간(ultrasound time), 유효 초음파 사용시간(effective phaco time, EPT), 평균 초음파 출력(average phaco power, AVG) 및 평형염액 사용량을 확인하였고 수술 전후 중심각막두께(central corneal thickness)를 확인하여 수술 전후의 상관관계를 독립표본검정을 통하여 분석하였다. 결과: 두 군의 비교에서 수정체혼탁도와 상관없이 Signature $PRO^{(R)}$ system에서 수술 중 적은 EFX (p<0.001), 짧은 유효 초음파 사용시간(EPT, p<0.001), 작은 평균 초음파 출력(AVG, p<0.001)을 사용함을 확인하였다. 수술 후 중심각막두께는 양 군에서 차이가 없었다. 결론: 수정체유화술을 시행함에 있어 기기의 반응속도 향상 및 자동막힘감지 기능은 수술 중 수정체 핵의 흡입력과 절단력을 높이면서도 전방을 안정적으로 유지할 수 있도록 하여 유의하게 짧은 시간 동안 적은 초음파 출력을 사용하면서 효율적인 수술이 가능하게 함을 확인하였다.

• Journal of the Optical Society of Korea
• /
• 제7권4호
• /
• pp.230-233
• /
• 2003

This study describes the conceptual design of a soft x-ray microscope system based on a laserbased source for biomedical application with high resolution (${\leq}$50nm). The laboratory scale soft x-ray microscope consists of high power laser plasma x-ray source and grazing incidence mirrors with high reflectivity. The laser plasma source used for developing this system employs Q-switched Nd-YAG pulsed laser. The laser beam is focused on a tantalum (Ta) target. The Wolter type I mirror was used as condenser optics for sample illumination and as objective mirror for focusing on a detector. The fabrication of the Wolter type I mirror was direct internal cutting using ultraprecision DTM. A hydrated biological specimen was put between the two silicon wafers, the center of which was $Si_3N_4$ windows of 100㎚ thickness. The main issues in the future development work are to make a stable, reliable and reproducible x-ray microscope system.

• 한국건축시공학회지
• /
• 제8권2호
• /
• pp.63-70
• /
• 2008

Reinforcing steel work plays an important role in terms of its structural performance or weight of construction cost for reinforced concrete structures. Precise estimation of re-bar quantity gives a basis for managing the reinforcing steel work effectively. However, the estimation process is still performed ineffectively based upon the expert's experience or manpower in spite of the advanced technology or improvement efforts. Therefore, the purpose of this research is to develop a prototype system for taking-off the quantity of reinforcing steel bars quickly and accurately in an order consistent with the specific members identified on the drawings. An estimate algorithm considering the connection, settlement and coating thickness of re-bars was suggested regarding to their replacement conditions which places more emphasis on constructibility. Also, this system produces the shop drawings automatically with the calculation results with work zone information.