• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.1
• /
• pp.36-41
• /
• 2017

In this paper, $Si_3N_4/hBN$ ceramics with various hexagonal boron nitride (hBN) contents (0, 10, 20, or 30 wt%) were fabricated via spark plasma sintering (SPS) at $1500^{\circ}C$, 50MPa, and 10m holding time. The material properties such as the relative density, hardness, and fracture toughness were systematically evaluated according to the hBN content in the $Si_3N_4/hBN$ ceramics. The results show that relative density, hardness, and fracture toughness continuously decreased as the hBN content increased. In addition, peak-step drilling (with tool diameter $500{\mu}m$) was performed to observe the effects of hBN content in micro-hole shape and cutting force. A machined hole diameter of $510{\mu}m$ (entrance) and stable cutting force were obtained at 30 wt% hBN content. Consequently, $Si_3N_4/30wt%$ hBN ceramic is a feasible material upon which to apply semi-conductor components, and this study is very meaningful for determining correlations between material properties and machining performance.

• Journal of Fashion Business
• /
• v.6 no.5
• /
• pp.27-40
• /
• 2002

The purpose of this thesis is presenting desirable design of uniform which could reflect high school girls' demands with the researches on their consciousness of fashion and actual state of uniforms. Methods to accomplish this research include first, examinationson characteristics of high school girls and their consciousness of fashion with relevant articles, second, interviews with designers from major domestic uniform brands - ELITE, IVY, SMART - and third, analysis on related internet sites. Practical researches are followed by design analysis and proposal of improvement on high school girls' uniform, accompanied by collection of photographs from field studies, major uniform brands' shops and uniform related internet sites. Korean high school girls in the digital era are able to express themselves in each different fashion with own individuality, preference or intention, as they are particularly interested in clothes or their appearances. Their consciousness of fashion became visible in a shape of negative attitude and dissatisfaction with uniforms due to its out-of-date design, lack of features and inconvenience in action. Besides more than half of high school girls already experienced reforming it for better looks. As a result of current analysis on references of uniform designs, various levels of refinement were noticed even in uniform of similar details, design, fabric textile and color due to differences on size & length of jacket collar, dart, cutting line, size of details, decorative line, easiness in fit, length of clothes, and etc. To provide students of more refined and desired designs which reflect their demands, current uniforms are to begin acquiring delicate changes with present vogue and feature such as size of details, silhouette, cutting line, decorative line and etc. In addition newly designed uniforms are to present desirable design with image of refinement and neat as they actively comprehend students' needs within its symbolic, functional, economic and aesthetic characteristics by nature.

• Fashion & Textile Research Journal
• /
• v.10 no.6
• /
• pp.989-996
• /
• 2008

The purpose of this study is to provide the basic knowledge for the pattern development of a flared skirt. Two flat pattern (FP) methods, the concentric circle method and the corrected concentric circle method, and a draping were used for pattern making. Using these patterns, skirts were made with lengthwise grain in the centerline. The influence of pattern making method on the silhouette of the flared skirt was evaluated by the hemlines formed at the skirt worn in a dress form. Moreover, the combined influence of pattern making method and cutting direction on the silhouette of the flared skirt was examined with the draping pattern (DP) skirt and a FP skirt with $45^{\circ}$ bias grain in the centerline. The DP skirt had more uniform nodes and formed a stable wave form than the FP skirts throughout the whole hemlines. The number of nodes was reduced with lining in the two FP skirts, whereas the number of nodes was not changed in the DP skirt. The unit wave form of all the skirts by three patterns showed long loop form, and the slope angles of the unit wave form of the two FP skirts were higher than that of the DP skirt. The silhouette of the flared skirt was highly influenced by the shape of the waist circumference line in patterns. The DP skirt with lengthwise grain in the centerline showed good silhouette with uniform nodes and high marking efficiency, compared to the FP skirt with $45^{\circ}$ bias grain in the centerline.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.6
• /
• pp.513-519
• /
• 2014

For depth machining in die and mold, Electrical Discharge Machining (EDM) is used generally. To make deep hole and deep shape efficiently, cemented carbide endmill for depth machining is necessary. For this purpose, cemented carbide endmill was designed using design of experiment (DOE). To improve cutting performance, endmill was coated with multilayer surface treatment, TiAlCrSiN and TiAlCrN, for higher wear resistance. In order to evaluate the endmill, Transverse Rupture Strength (TRS) test was tried for investigating the relationship between surface treatment and strength in endmill body. Scratch test was also used for measuring adhesion force of each surface treatment. To evaluate hardness of surface treatment, Atomic Force Microscope (AFM) analysis was carried out. Wear test was executed for characteristics of each surface treatment in high temperature. Consequently, TiAlCrSiN was superior to the TiAlCrN coating in case of high temperature environment such as cutting.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.6 no.1
• /
• pp.55-59
• /
• 1977

The consumption of sugar in our diet increased so great that much U. S. dollars are spended to import sugar source from foreign contries. To replace a part of it we adopted mother plant and seeds of the well-known Stevia (Stevia rebaudiana Bertoni M.) originated from south America, from the Agricultural Experimental Station of Hokkaido, Japan, in 1974. In order to determine the growth condition of Stevia in our climate and soil condition, the results of survey and determination were as follows: 1. Germination rate of Stevia was averaged 33.6% at 35 th day after seedling and the maximum germination period was between 5 and 20 days after seedling. 2. The seedling rate of Stevia was about 8%. 3. Establishment of roots of Stevia propagated by cutting method was above 90% but only S-1 strain showed lower rate., 75%. 4. S-2 strain showed the best growth rate that was about 160cm by plant height and it was decreased by the following order : S-4, S-3, S-1, S-6 and S-5 strains. 5. S-4 strain resulted in 45 branches that was the highest number among strains tested and S-2 strain was the next. 6. The content of sweetening compound of Stevia, stevioside, was 5.3% in S-1, S-2, S-5 and S-4 strains but S-3 and $S^*$-6 strains were relatively low content, 4.9%. From the above results we obtained Stevia could be propagated by cutting method and the growth conditions including plant height, number of branches and content of stevioside were relatively better in S-2 and S-4 strains that were differentiated by the shape of leaf.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.5
• /
• pp.40-48
• /
• 2013

Eco deck plate system is a construction method that deconstruction of galvanized steel sheets is possible by integrating steel-wire-integrated girders and the galvanized steel sheets with bolts. Therefore, compared with previous steel-wire-integrated deck plates which were joined by welding, the system is acknowledged as the construction method possible management and repair. This study conducted an experimental research by manufacturing total 24 full size specimens in a same condition for 12-shape specimens by two parts to evaluate structural behaviors of the eco deck plates. In the results after the test, permissible deflection for the construction load action was shown to be values under design values and satisfactory. The processing of lattice steel wires was presented to be structurally advantageous in being manufactured by cutting downward. Also, in case of a specimen that D13 as a steel wire was used, destruction occurred at the welding part of the bottom steel wire and the lattice steel wire, so improvement measures for the welding in factory manufacture are necessary.

• The International Journal of Costume Culture
• /
• v.4 no.2
• /
• pp.94-114
• /
• 2001

Men's Po of (he Chosun period became simple and stable in shape as the nation moved from its early to late period. Re lines of the external structure of the clothing shows the beauty of the garment. Re lines generally derive their beauty from curved lines, gradually replacing the straight lines of the earlier part of the Chosun period. The linear beauty of the external structure of men's Po is found in the outline and silhouette. Generally in the early Chosun period it could be seen that H-shaped silhouettes, narrowed strips and flexible drapes descending to the ankles were still in use from the period of the Koryo dynasty And in the 17th century, or the mid Chosun period, considerable numbers of H-shaped drapes with wide sleeves and side Moo were seen. At the beginning of the 18th century, voluminous A-shaped outlines appeared. From the late Chosun period through the mid and late Chosun period, or the 18th and 19th centuries, the from silhouette changed from voluminous A-shapes to narrower H-shapes. The beauty of the lines of the external structure of men's Po is due to its harmonising with the straight body lines of men. The straight Git of the early Chosun period harmonises beautifully with the straight Baerae and Doryun and the curved Git of the later Chosun period similarly harmonises with the curved Baerae and Doryun lines. The shape of men's Po has a balance betweon right and left, centering around the Sup lines. The sleeves have the balanced beauty of vertical lines. Git and Sup have beauty through the balance of oblique and straight lines while Baerae and Doryun have similar balances through curves. Jikrung, Chulik, Dapho's side Moo, coat strings, Doryun and sleeves drape, all of which are manufactured by means of plane cutting, Pow together beautifully. Re Git, Sup, and the silhouette and drape of men's Po, which are also manufactured through plane cutting, make the wearer look tall and at the same time express the beauty of mature manhood. The linear beauty shown in men's Po during the Chosun Period have beauty through harmonizing with straight and curved lines, beauty balance, beauty of flow, beutity of emphasis and beauty of optical illusion.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.32-44
• /
• 2001

The purpose of this study was to investigate the effects of Er : YAG laser on cutting efficacy and temperature changes of dentin. We used the dentin specimens of human premolars and molars which contain the physiologic saline and maintain the pulpal pressure in dentinal tubules. Each specimen was exposed to Er : YAG laser with non-contact handpiece type delivery system under different treatment condition of irradiation energy, pulse repetition rate, and exposure time. Two procedures were conducted by the presence of water flow during lasing. The specimens were grouped by thickness of dentin. We investigated the cavity pattern, volume, and temperature change of dentin specimen to determine the cutting efficacy and temperature rise of Er : YAG laser, and obtained following results. 1. Cutting volume of dentin was increased by increasing the irradiation energy, pulse repetition rate, and exposure time(P<0.05). 2. Margins of abulated cavities were sharp and clean and floors of cavities were conical in shape and showing smooth surfaces. Upper diameter of abulated cavities were increasing as laser parameter of irradiation energy, pulse repetition rate, and exposure time were increased. A few cracks were observed on abulated surfaces under treatment condition of laser parameter with 150mJ, 5Hz, and 5sec. 3. Temperature was increased as laser parameter of irradiation energy, pulse repetition rate, and exposure time were increased, and temperature rise was decreased as dentin thickness was increased(P<0.05). 4. Temperature rise was decreased under water flow compared with no water flow during laser exposure(P<0.05). From these results, we think that the method of using a Er:YAG laser would be effective and safe in cutting dentin for clinical application.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.743-748
• /
• 2005

In order to realize a three-dimensional shape on CAD, the machining process has been widely used because it offers practical advantages such as precision and versatility. However, the traditional machining process needs a large amount of time in cutting a product and the remained material causes trouble such as inconvenience for clarity. Therefore, a new rapid manufacturing process using the hot tool, Rapid Heat Ablation process (RHA), has been developed. In this paper, the hot tool for RHA process is devised to minimize radius of heat affected zone and also investigated for verification. TRIZ well-known as creative problem solving method is applied to overcome the contradictive requirements of the hot tool. For the detailed design of the hot tool, numerical model is established with several assumptions. Based on the numerical results, surface temperature is measured with K-type thermocouple at the predetermined location. Numerical and experimental results show that the devised hot tool fulfils its requirements. It verifies the practicality of hot tool that the hemisphere shape is ablated using the hot tool with stair structure.

• Fashion & Textile Research Journal
• /
• v.11 no.6
• /
• pp.925-933
• /
• 2009

This research was carried out by analyzing a form and composition in baseball cap targeting 97 marketing products, and we have typified it by frequency analysis. We have carried out comparing and wearing test between comparative pattern and the most preferred three products of sports brand, fashion brand A, and fashion brand B (flex fit). And also, in order to provide basic indices for developing new pattern, we have carried out analysis of variance. 1. As a result of analyzing a form in baseball cap, the most general pattern type for crown is central cutting with six pieces. In a cap, a basic type with no decoration was the most general. In the size adjustment and decoration, belt type and embroidery type (front or side embroidery of the crown) was the most common, respectively. 2. As a result of comparing and analyzing six-piece typed crown pattern, the comparative pattern was the same and symmetric in size and form of three patterns in front, side, and back. However, the patterns of marketing products of three brands were different in size and form of three patterns in front, side, and back. The patterns of sports brand were the largest in crown height and width, thus it was good at providing activity and motion. The patterns of fashion brand A were the shortest in the crown length and well-curved in front pattern, so it was well-matched with head shape. The patterns of fashion brand B were well-described back side of head since its convex and long patterns in the back head. 3. As a result of wearing test by five-point Likert scale among brand, pattern of fashion brand B outperformed the others since it was well-matched with head shape. In the cap, pattern of fashion brand A is the most preferred which was 7.5 cm of length and 18cm of width.