• Journal of Mushroom
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2019

Agrocybe cylindracea was cultured in a bag, in which sawdust culture medium (1 kg) is put in a plastic bag (PE), with poplar sawdust, rice bran, wheat bran, and dried bean curd refuse in the ratio of 70:10:10:10 (v/v). 2% of the culture medium was inoculated with the liquid starter of Agrocybe cylindracea, and this was incubated at $25^{\circ}C$. After incubation, the A. cylindracea was further cultured by cutting the top vinyl portion of the bag down to the level of the culture medium surface of the first inoculation part. The cut culture medium was placed in a growth room at $25^{\circ}C$, and pin-heading was induced under light irradiation at 99% humidity and 1,000 ppm $CO_$ level for 3days. When the grow the environment was controlled at 95% humidity and $21^{\circ}C$, the bending of the stem was less as compared to that when the cap of the bag had been removed. The number of effective fruiting bodies per bag increased by 140% (28.8), the quantity per bag increased by 29.5%, and 148.5 g A. cylindracea could be potentially harvested.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.2
• /
• pp.77-84
• /
• 2022

This study aimed to evaluate the growth, yield, and grain quality characteristics of rice varieties that were subjected to water stress during the tillering stage. We also sought to identify whether water stress could be indicated via the plants' response to chlorophyll fluorescence. In this study, we induced water stress by intentionally cutting off water for 30 days, starting 15 days after transplanting the rice varieties to a greenhouse. We analyzed nine rice varieties, including Ilpum, which is the most frequently cultivated variety in Gyeongsangbuk-do, South Korea. The control group was planted in a paddy field where irrigation was entirely dependent on rainfall. Our results revealed that the heading stage of the nine studied varieties occurred approximately ten days earlier in the rain shelter than in the field. Moreover, the rice yield, head rice rate, and palatability score decreased by 18.6%, 17.1%, and 8.3%, respectively, while protein content increased by 20.2% compared with the control group. The Saenuri and Haimi varieties showed the lowest reduction in yield under the water stress conditions, while the Daebo and Samkwang varieties showed the highest reduction in yield. The chlorophyll fluorescence response after re-irrigation was measured between July 30^th and August 17^th. The ratio of variable fluorescence to maximum chlorophyll fluorescence (F_V/F_M) values failed to recover to their baseline values, resulting in either no change or a reduction in fluorescent response, even after re-irrigation of Daebo and Samkwang varieties. These results can be utilized as empirical data for drought-affected farms to select resistant varieties that can respond to spring drought in the southern plains of Gyeongsangbuk-do.

• Clean Technology
• /
• v.28 no.4
• /
• pp.323-330
• /
• 2022

Microfluidic paper-based analytical devices (μPADs) have recently been in the spotlight for their applicability in point-of-care diagnostics and environmental material detection. This study presents a double-sided printing method for fabricating 3D-μPADs, providing simple and cost effective metal ion detection. The design of the 3D-μPAD was made into an acryl stamp by laser cutting and then coating it with a thin layer of PDMS using the spin-coating method. This fabricated stamp was used to form the 3D structure of the hydrophobic barrier through a double-sided contact printing method. The fabrication of the 3D hydrophobic barrier within a single sheet was optimized by controlling the spin-coating rate, reagent ratio and contacting time. The optimal conditions were found by analyzing the area change of the PDMS hydrophobic barrier and hydrophilic channel using ink with chromatography paper. Using the fabricated 3D-μPAD under optimized conditions, Ni²⁺, Cu²⁺, Hg²⁺, and pH were detected at different concentrations and displayed with color intensity in grayscale for quantitative analysis using ImageJ. This study demonstrated that a 3D-μPAD biosensor can be applied to detect metal ions without special analysis equipment. This 3D-μPAD provides a highly portable and rapid on-site monitoring platform for detecting multiple heavy metal ions with extremely high repeatability, which is useful for resource-limited areas and developing countries.

• Journal of Korean Society of Forest Science
• /
• v.89 no.1
• /
• pp.105-115
• /
• 2000

This study was conducted to test a hypothesis that sensitivity of trees to ozone exposure was related to their growth rates. Two cultivars of Populus alba ${\times}$ P. glandulosa with different genetic growth potential were used for the comparison. Two clones(72-30, 72-16) of cultivar No. 4 with fast growing potential and three clones(71-28, 72-27, 72-19) of cultivar No. 2 with slow growing potential were propagated in early spring by cutting in $2-{\ell}$ plastic pots. They were grown outdoor for 5 months and exposed in late August for 30 days to 70 and 130ppb ozone in a open-top chambers(2.5m in diameter and 2m in height). Ozone concentration in a control chamber was maintained below 30ppb by filtering with activated charcoal. Each treatment was replicated twenty times. In a control chamber, cultivar No. 4 grew 73%, 64%, and 38% faster than cultivar No. 2 in leaf weight, root weight, and total dry weight, respectively. Visible injury was observed only in cultivar No. 4 in 130ppb treatment. Ozone treatment at both 70 and 130ppb decreased height growth, dry weight of leaf, root, and entire plants in all five clones. Particularly root growth was reduced by 39.7% and 13.8% in cultivar No. 4 and No. 2, respectively, in 70ppb treatment. Consequently, shoot/root ratio of cultivar No.4 was increased by 63.4%, while that of cultivar No.2 was increased by 22.1%. Stomatal conductance decreased more in cultivar No.4 than in cultivar No.2. Net photosynthesis of cultivar No.4 at 130ppb ozone decreased by 69.5%, while that of cultivar No.2 decreased by 31.5%. Above mentioned physiological responses of two cultivars to ozone strongly suggested that fast growing cultivar No.4 was more sensitive to ozone than slow growing cultivar No.2. It was concluded that sensitivity of trees to ozone exposure was closely related to their growth rates.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.5
• /
• pp.707-714
• /
• 2005

Ingredient ratio for making nabak kimchi and the manufacturing method were standardized from the available literatures. Fermentation properties and $CO_2$ production of the nabak kimchi were investigated during the fermentation at $5^{\circ}C,\;10^{\circ}C,\;and\;20^{\circ}C$. Standardized ingredients ratio of nabak kimchi that added 100 mL of water was as follows: 45.0 g baechu cabbage, 26.9 g radish, 1.9 g green onion, 1.0 g red pepper, 1.2 g crushed garlic, 0.9 g crushed ginger, 0.7 g red pepper powder. The standardized manufacturing method of nabak kimchi was as follows: washing ingredients, cutting radish and baechu cabbage $(2.5\times2.5\times0.5\;cm)$, salting for 20 min, washing and draining, pretreatment of ingredients, dissolving red pepper powder in water, blending, mixing, and adding the water to the mixed ingredients. Fermentations at $5^{\circ}C$ for 8 days, at $10^{\circ}C$ for 3 days, and at $20^{\circ}C$ for 1 day led to the acidity levels of $0.21\%,\;0.20\%,\;and\;0.31\%$, respectively. From the relationships between optimally ripened pH and acidity, nabak kimchi showed lower acidity of $0.20\~0.25\%$ with pH $4.2\~4.5.$ Like other kinds of kimchi, the Levels of Leuconostoc sp. were high specially at later stage of fermentation at low temperature $(5^{\circ}C)$. However, the levels of Lactobacillus sp. were low at $5^{\circ}C$. Nabak kimchi produced high levels of $CO_2$ in the initial fermentation period and followed by rapid decrease of $CO_2$ production with the fermentation. From the relationships between pH and $CO_2$ content, the highest $CO_2$ contents were found pH $4.0\~4.4$, 3.8 and 3.4 at $5^{\circ}C,\;10^{\circ}C$, and $20^{\circ}C$, respectively. This fact indicated that fermentation at $5^{\circ}C$ has the highest $CO_2$ content at optimally ripened pH of 4.3 and the fermentation at lower temperature such as $5^{\circ}C$ could extend the eatable time of nabak kimchi.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.6
• /
• pp.751-758
• /
• 2017

The objective of this study was to determine the effects of moisture content and screw speed on the physical properties of extruded soy protein isolate (SPI). Expansion index, water absorption index, texture, integrity index, color, and nitrogen solubility index of extruded SPI were analyzed to determine the relationship with extrusion conditions. Extrusion conditions were moisture content (40, 50, and 60%) at a fixed die temperature ($140^{\circ}C$) and screw speed (250 rpm). The other extrusion conditions were screw speed (150, 250, and 330 rpm) at a fixed moisture content (55%) and die temperature ($140^{\circ}C$). Specific mechanical energy (SME) input decreased as moisture content increased from 40 to 60%. However, SME input increased as screw speed increased from 150 to 330 rpm. Expansion ratio and piece density decreased as moisture content and screw speed increased, and specific length increased as moisture content and screw speed increased. The extruded SPI at 40% moisture content had higher water absorption index, texture, and color differences than those of the extruded SPI at other moisture contents (50 and 60%). however, the extruded SPI at 40% moisture content had lower integrity index and cutting strength than those of the extruded SPI at other moisture contents (50 and 60%). In conclusion, the physical properties of extruded SPI were more affected by moisture content than screw speed.

• Korean Journal of Poultry Science
• /
• v.12 no.1
• /
• pp.31-38
• /
• 1985

To learn more about the productivity of edible meat and its functional properties of spent hen, 60 White Leghorn fowls at 20 month of age were randomly divided into 6 groups, 10 hen for each group, and processed. As the productivity of edible meat, the yield of dressed carcass, giblets, cut-up meat, and breast and leg (thigh and drustick) muscles were determined. The approximate chemical composition, the content of salt-soluble protein, the emulsifying capacity and W.H.C. of breast and leg muscle were measured as the functional properties. The results were summarized as follows. 1. The average live weight of spent hen was 1,576.7g from which the yield of dressed carcass and giblets were 998.9g(63.4%) and 75.3g(4.8%) respectively. It means the yield of ready-to-cook form was 1,074.2g(68.2%) and the inedible byproducts was 502.5g (31.8%). 2. The average, weight of each part of cut-up chicken were: neck 41.0g(4.1%), wings 135.9g (13.6%), breast 276.7g (27.7%), legs 323.6g (42.4%). back 176.1g(17.6%) and the cutting-loss was 45.6g(4.6%). 3. The average weight of total edible muscle from breast and leg was 51.5g(85.86% of breast and leg cut weight) and the percentages based on the carcass and live weights were 51.6% and 32.7%, respectively. 4. The contents of H$_2$O, protein, fat and water-protein ratio of breast muscle were 72.95%, 20.54%, 1.59% and 3.55, respectively and those of leg muscle were 71.9%, 19.12%, 3.96% and 3.76%, respectively. 5. The salt-soluble protein contents of breast and leg muscle were 7.97% and 6.26% and their concentrations based on the total protein content were 38.8% and 32.74%, respectively. 6. The emulsifying capacity of breast and leg muscle was 43.23$m\ell$and 43.23$m\ell$, respectively. 7. The W. H. C- of breast and leg muscle was 54.23% and 52.61%, respectively.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.20 no.1
• /
• pp.4592-4598
• /
• 1978

The purpose of this research is to find out mathemetically an economical intake water depth in the design of head works through the derivation of some formulas. For the performance of the purpose the following formulas were found out for the design intake water depth in each flow type of intake sluice, such as overflow type and orifice type. (1) The conditional equations of !he economical intake water depth in .case that weir body is placed on permeable soil layer ; (a) in the overflow type of intake sluice, {{{{ { zp}_{1 } { Lh}_{1 }+ { 1} over {2 } { Cp}_{3 }L(0.67 SQRT { q} -0.61) { ( { d}_{0 }+ { h}_{1 }+ { h}_{0 } )}^{- { 1} over {2 } }- { { { 3Q}_{1 } { p}_{5 } { h}_{1 } }^{- { 5} over {2 } } } over { { 2m}_{1 }(1-s) SQRT { 2gs} }+[ LEFT { b+ { 4C TIMES { 0.61}^{2 } } over {3(r-1) }+z( { d}_{0 }+ { h}_{0 } ) RIGHT } { p}_{1 }L+(1+ SQRT { 1+ { z}^{2 } } ) { p}_{2 }L+ { dcp}_{3 }L+ { nkp}_{5 }+( { 2z}_{0 }+m )(1-s) { L}_{d } { p}_{7 } ] =0}}}} (b) in the orifice type of intake sluice, {{{{ { zp}_{1 } { Lh}_{1 }+ { 1} over {2 } C { p}_{3 }L(0.67 SQRT { q} -0.61)}}}} {{{{ { ({d }_{0 }+ { h}_{1 }+ { h}_{0 } )}^{ - { 1} over {2 } }- { { 3Q}_{1 } { p}_{ 6} { { h}_{1 } }^{- { 5} over {2 } } } over { { 2m}_{ 2}m' SQRT { 2gs} }+[ LEFT { b+ { 4C TIMES { 0.61}^{2 } } over {3(r-1) }+z( { d}_{0 }+ { h}_{0 } ) RIGHT } { p}_{1 }L }}}} {{{{+(1+ SQRT { 1+ { z}^{2 } } ) { p}_{2 } L+dC { p}_{4 }L+(2 { z}_{0 }+m )(1-s) { L}_{d } { p}_{7 }]=0 }}}} where, z=outer slope of weir body (value of cotangent), h1=intake water depth (m), L=total length of weir (m), C=Bligh's creep ratio, q=flood discharge overflowing weir crest per unit length of weir (m3/sec/m), d0=average height to intake sill elevation in weir (m), h0=freeboard of weir (m), Q1=design irrigation requirements (m3/sec), m1=coefficient of head loss (0.9∼0.95) s=(h1-h2)/h1, h2=flow water depth outside intake sluice gate (m), b=width of weir crest (m), r=specific weight of weir materials, d=depth of cutting along seepage length under the weir (m), n=number of side contraction, k=coefficient of side contraction loss (0.02∼0.04), m2=coefficient of discharge (0.7∼0.9) m'=h0/h1, h0=open height of gate (m), p1 and p4=unit price of weir body and of excavation of weir site, respectively (won/㎥), p2 and p3=unit price of construction form and of revetment for protection of downstream riverbed, respectively (won/㎡), p5 and p6=average cost per unit width of intake sluice including cost of intake canal having the same one as width of the sluice in case of overflow type and orifice type respectively (won/m), zo : inner slope of section area in intake canal from its beginning point to its changing point to ordinary flow section, m: coefficient concerning the mean width of intak canal site,a : freeboard of intake canal. (2) The conditional equations of the economical intake water depth in case that weir body is built on the foundation of rock bed ; (a) in the overflow type of intake sluice, {{{{ { zp}_{1 } { Lh}_{1 }- { { { 3Q}_{1 } { p}_{5 } { h}_{1 } }^{- {5 } over {2 } } } over { { 2m}_{1 }(1-s) SQRT { 2gs} }+[ LEFT { b+z( { d}_{0 }+ { h}_{0 } )RIGHT } { p}_{1 }L+(1+ SQRT { 1+ { z}^{2 } } ) { p}_{2 }L+ { nkp}_{5 }}}}} {{{{+( { 2z}_{0 }+m )(1-s) { L}_{d } { p}_{7 } ]=0 }}}} (b) in the orifice type of intake sluice, {{{{ { zp}_{1 } { Lh}_{1 }- { { { 3Q}_{1 } { p}_{6 } { h}_{1 } }^{- {5 } over {2 } } } over { { 2m}_{2 }m' SQRT { 2gs} }+[ LEFT { b+z( { d}_{0 }+ { h}_{0 } )RIGHT } { p}_{1 }L+(1+ SQRT { 1+ { z}^{2 } } ) { p}_{2 }L}}}} {{{{+( { 2z}_{0 }+m )(1-s) { L}_{d } { p}_{7 } ]=0}}}} The construction cost of weir cut-off and revetment on outside slope of leeve, and the damages suffered from inundation in upstream area were not included in the process of deriving the above conditional equations, but it is true that magnitude of intake water depth influences somewhat on the cost and damages. Therefore, in applying the above equations the fact that should not be over looked is that the design value of intake water depth to be adopted should not be more largely determined than the value of h1 satisfying the above formulas.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.4 no.1
• /
• pp.93-95
• /
• 1968

The importance of leaf area as related to transpiration and photosynthesis is generally recognized. In general, a compound leaf of soybean consist of one main leaflet and two side leaflets from each node of the stem. Takahashi and Fukuyama (1919) classified soybeans into three types, namely the long leaf type, round leaf type, and intermediate type, in which the last one had round leaves at the base and long leaves in the upper part of the stem. Nagai (1925) and Takahashi (1935). dealt with the genetics of the leaf form and association with other characters. The closely relationships, the correlation coefficients from 0.64 to 0.73, were shown between the leaf area and the soybean yield in the experiments by Nagai (1942). Nagata (1950) also tested the varietal differences of the variation of leaf length and its ratio to the leaf width on the nodes of stem, and finally divided varieties into five types. Three methods of measuring area of strawberry leaves were used by Darrow (1932). The first involved determining a factor to be used with length or length ${\times}$width measurements. The second method involved placing leaves on pieces of cardboard of known area cut to the shape of the leaves. Direct use of the planimeter on intact leaves was Darrow's third method. Miller (1938) enumerated several methods to determine the leaf surface area in plants, some of which were extremely laborious and required removing leaves from plants. They included tracing outlines of leaves on paper and measuring the enclosed area with a planimeter or cutting out the traced areas and comparing the weights obtained with the weight of a known paper. Another method involved placing the form of the leaf on sensitized paper with the area being determined by measuring or weighing as above. Miller further stated that the photoelectric cell can also be utilized to estitmate leaf area. Working with field beans, Davis (1940) found that 0.004517 (length ${\times}$ width) of the center leaflet was the most nearly accurate of four methods attempted. A simple procedure to measure leaf area in corn was devised 1 y Montgomery (1911) and used by Kiesselbach (1950). The formula was length ${\times}$ width ${\times}$ 0.75. Stickler et al. (1961) have successfully used length times width ${\times}$ 0.747 to estimate area of grain sorghum leaves. Bhan and Pande(1966) has also used length ${\times}$ width ${\times}$ 0.802 to determine leaf area of rice varieties. The main objectives of the present investigation were to develop an accurate, rapid method to determine leaf area in soybean varieties and to examine certain data associated with leaf area determinations.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.3
• /
• pp.45-76
• /
• 2000

The purposes of this study were to investigate and understand the present status of various types of "deserts", such as sand desert, gravel desert, rock desert, earth desert, salt desert, desert, rocky desert, gobi desert, sandy desert, clay desert, etc., and the general countermeasures for the combating "desertification" "desertization", and to develop the technologies on the revegetation and restoration for the combating desertification in China. The methods of this study were mainly composed of field surveys on the several experimental sites and research institutes related to combating desertification in China, and examinations on the various technologies for the combating desertification at the Daxing Experimental Station of Beijing Forestry University. The conclusion from this study may be summarized as follows; 1. Status and tendency of desertification in China : China is one of the countries seriously threatened by desertification. Desertification affected areas in China are mainly distributed in arid, semi-arid and dry sub-humid areas in China, covering the most regions of the Northeast China (eastern region of Inner-Mongolia), the northern part of the North China (middle and western region of Inner-Mongolia, Shaanxi, Ningsha, Gansu) and the western part of the Northwest China (Xinzang, Qinghai, Xizang). The total area affected by desertification in China is approximately 2.622 million $km^2$. It covers 27.3% of the total territory of China. Until recently, it is estimated that the annual spreading ratio of desertification in China is 2,460 $km^2$. Therefore, desertification is mostly serious problems facing to the Chinese people. 2. The causes and environmental effect of desertification : The desertification in China is mainly caused by compound factors, including natural condition and human activities. In China, the desertification is started by the decrease of precipitation, continuous dry and drought, strong wind, wind and water erosion, land degradation and loss of natural vegetation caused by climate variation, and accelerated by the human activities, such as over-cultivating, over-grazing, over-cutting of woods, irrational use of water resources. Because desertification has affected the geographical features, soil nutrients contents, salinity, vegetation coverage and the functions of ecosystem, the environmental deteriorations in the desertification affected areas are very seriously. 3. The fundamental strategies of combating desertification in China are the increase of education and awareness of people through various mass media, the revision of laws to guarantee operation of Desertification Combating Law and to improve many relating laws and regulations, the application of advanced technologies and training of experts, the establishment of discriminative policies, and increasing arrangement of budget-investment, and so on. China, as a signed country in UNCCD, has made efforts for the combating desertification. Korea is also signed country in UNCCD, so we should play an important role in the desertification combating projects of China for the northest asia and global environmental conservation as well as environmental conservation of Korea.