• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.6
• /
• pp.734-737
• /
• 2006

This study was carried out to establish the manufacturing process of barley leaf powder tea. The optimal manufacturing process among many trials was determined with sensory evaluation. Finally established process and operation conditions were as follows: pretreatment (cutting and washing), steaming ($100^{\circ}C$, 30 sec), primary drying and roasting ($130^{\circ}C$, 40 min), rolling (RT, 25 min), middle drying and roasting ($60^{\circ}C$, 30 min), final drying and roasting ($55^{\circ}C$, 25 min), drying ($60^{\circ}C$, 20 min), roasting ($85^{\circ}C$, 20 min), and powdering (120 mesh). The barley leaf powder tea produced by this process mainly consisted of dietary fiber (33.8%), amino acids (12.9%), minerals (4.7%) and ${\beta}-carotene$ (6.9 mg%).

• Proceedings of the KSLP Conference
• /
• 2003.11a
• /
• pp.180-180
• /
• 2003

Objectives : Vocal fold augmentation by injectable material under direct visual control is an easy and simple operation. However, when autologous fat or bovine collagen is used, resorption creates a problem. And autologous fascia is debating about absorption now days. This study is to evaluate the histology of minced and injected autologous auricular cartilage and fat graft in the augmentation of unilateral vocal fold paralysis using a canine model. Methods : Nine dogs were operated. At first, a piece of auricular cartilage was harvested from ear and minced into tiny chips with a scalpel. And also, a piece of fat tissue was harvested from inguinal area and minced into tiny chips with a scalpel. Cutting off a section of the recurrent nerve paralyzed the right vocal fold. The minced cartilage and fat-paste (0.2ml) was injected using a pressure syringe into the paralyzed thyroarytenoid muscle under direct laryngoscopy. Two animals were sacrificed at 3 days, three at 3 weeks, two at 3 months, one at 6 months, one at 12 months. Each dog underwent laryngectomy and serial coronal sections of paraffin blocks from the posterior part of the vocal fold were made. Results : There was no significant complication perioperatively and during follow-up. There was acute inflammatory findings in the graft at 3 days and 3 weeks. The injected cartilage remained in the larynx until 12 months. Conclusion : The autologous auricular cartilage graft is well tolerated and may be very effective material for volumetric augmentation on paralyzed vocal cord.

• Korean Journal of Head & Neck Oncology
• /
• v.34 no.1
• /
• pp.15-19
• /
• 2018

Background and Objectives: Thunderbeat (TB) and Harmonic scalpel (HS) have been applied to variable head and neck surgery, which are useful for both coagulation and cutting of tissues. However, there have been no comparative studies covering the usefulness of these energy devices in surgery for major salivary gland. In this study, we analyzed the surgical outcomes of two devices in surgery for parotidectomy and submandibular gland (SMG) resection. Materials and Methods: A retrospective chart review of 90 patients including two groups (HS group, n=45 versus TB group, n=45) of patients matched for their patient factors was conducted. Clinicopathologic factors of the patients and surgical outcomes such as the operation time, intraoperative bleeding, amount and duration of drain, hospital stay and complications were compared between two groups. Results: There were no significant difference between two groups regarding the clinicopathologic factors and short-term surgical outcomes. Conclusion: Thunderbeat and HS are both effective and safe for parotidectomy and SMG resection in variable benign disease of major salivary gland.

• Korean Journal of Food Science and Technology
• /
• v.20 no.4
• /
• pp.463-469
• /
• 1988

The effects of moisture content and particle size of rice flour on the physical properties of the extrudate were examined by using a autogeneous single screw extruder. The moisture contents tested were in the range of 17-28% and the particle sizes were 18-60mesh and 60-120mesh. Samples were taken at different temperatures from the start-up period to the steady state operation. The expansion ratio increased and bulk density decreased as the moisture content and particle size of the flour decreased. The cutting force decreased and the air cell size became uniform as the moisture content and particle size of the flour decreased. As the moisture content increased, the yellowness of the extrudate powder decreased, while the lightness increased, the apparent viscosity increased and the water soluble index decreased. Gelatinization and partial dextrinization were apparent during the extrusion process, and the degree of dextrinization was appeared to be influenced by the levels of moisture content and particle size of rice flour.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.4
• /
• pp.485-489
• /
• 2000

A mucocele is a thin-walled, bluish, fluctuant swelling occurring just beneath the oral mucosa and filled with mucoid material. It usually results from damage to a salivary gland following which there is extravasation of mucus into the tissues, or occasionally it forms from dilatation of the duct of a salivary gland. The accepted treatment of a mucocele is excision of the sac and the associated minor salivary gland. Use of the $CO_2$ laser in oral surgery has several advantages. It is a very precise means of cutting tissue and causes little adjacent nontarget tissue damage. There is excellent coagulation of small blood vessels and consequently operative hemorrhage is greatly decreased. There is instant sterilization of the operative site, which decreases bacteremia. The operation sites were completely healed without any infection or complication and discomfort from swelling or pain was not noted in all cases throughout the healing process. In addition, following this therapy, there is little contraction or scarring.

• International Journal of Concrete Structures and Materials
• /
• v.11 no.2
• /
• pp.327-341
• /
• 2017

Openings in slabs are usually required for many different applications such as aeriation ducts and air conditioning. Opening in concrete slabs due to cutouts significantly decrease the member stiffness. There are different techniques to strengthen slabs with opening cutouts. This study presents experimental and numerical investigations on the use of Carbon Fiber Reinforced Polymers (CFRP) as strengthening material to strengthen and restore the load carrying capacity of R.C. slabs after having cutout in the hogging moment region. The experimental program consisted of testing five (oneway spanning R.C. flat slabs) with overhang. All slabs were prismatic, rectangular in cross-section and nominally 2000 mm long, 1000 mm width, and 100 mm thickness with a clear span (distance between supports) of 1200 mm and the overhang length is 700 mm. All slabs were loaded up to 30 kN (45% of ultimate load for reference slab, before yielding of the longitudinal reinforcement), then the load was kept constant during cutting concrete and steel bars (producing cut out). After that operation, slabs were loaded till failure. An analytical study using finite element analysis (FEA) is performed using the commercial software ANSYS. The FEA has been validated and calibrated using the experimental results. The FE model was found to be in a good agreement with the experimental results. The investigated key parameters were slab aspect ratio for the opening ratios of [1:1, 2:1], CFRP layers and the laminates widths, positions for cutouts and the CFRP configurations around cutouts.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.7
• /
• pp.592-602
• /
• 2013

The purpose of this study is to optical cable closure and fiber line monitoring system. The current optical cable closure cases have not had any systems that help the central control station recognize opening as well as closing the cases in real-time when opening B2B and B2C lines. to solve this problem, it is considered to create systems that go off alarms, real-time fault location immediately, set alarms for open and close monitoring optical cable closure, and inspect regularly whether optical cables are deficient when monitoring the optical line in real-time and cutting them, in this paper, the monitoring system whose the central control station finds an optical signal block immediately and goes off the alarms when line workers separate components like a connector or a tray from the optical cable closure through OTDR. this study can contribute to stabilize the network quality through the quick and effective operation of the cables.

• Korea Journal of Hospital Management
• /
• v.4 no.1
• /
• pp.1-20
• /
• 1999

Since the late 1980s, there have been radical changes in the managerial environment of Y University Medical Center(YUMC). Externally, the competition among hospitals has intensified due to the establishment of universal health insurance in 1939 and the entrance of large enterprises into the health care industry in the early 1990s. In addition, government regulation of medical institution is becoming stricter. Also, consumer groups have continued to demand the respect for patient rights and improvement of the quality of medical services. Internally, the financial condition of YUMC has worsened, not only because weak control and poor mediation in its large-scale structure have made its operation inefficient, but also because the rates of increase in the prices of goods and labor have grown faster than any increases in revenues. This study on materials management at YUMC presents a way for YUMC to reduce costs and increase its productivity, thereby overcoming its financial difficulties and dealing with external pressures. This study utilized the case studies of the materials purchasing and medical supply management in the United States and the comparative analysis of management to suggest short-term and long-term alternatives for innovation in YUMC. The goals of the short-term alternatives for innovation are to centralize the purchasing and supply departments and to simplify the decision-making processes. Through these attempts, it is estimated that YUMC's costs could be reduced by $600,000 per year. In the long-term, it is necessary to consider introducing a Supply Processing Distribution(SPD) system and setting up a centralized electronic system for supply and inventory management, although it is difficult to estimate the effect of cost-cutting because of the lack of analysis data. Thus, YUMC should thoroughly analyze initial investment costs and economical efficiency generated from long-term alternatives.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.213-218
• /
• 2007

Domestic by opening of world construction market with recent FTA should be achieved systematic action that of exoteric surrounding construction environment to inculcate this because consciousness structure unpreparedness of legation fields about quality is expose for hindrance factor for QI in construction spot by quality and organization management official important thing for building company's QI because conquest is possible through QI of construction to possess government official and international competitiveness of customer satisfaction by offering consumer building of change and good quality rapidly, organization's CEO determination must become side improvement the formation government official enemy, and when inspect by each process, responsible persons participate cooperation enterprise space-time. To improve this because complete charge department for quality control appears that organization management need complete charge department being expose by greatly unprepared misgovernment in heavy hydrogen building company, expense that CEO under direct control histiocyte modeling air with AHP analysis is economical will be cost, but is construed can bring excellent effect in operation management side of quality and organization such as cost-cutting effect in maintenance side and I should do so that can occupy competitive power high position with tissue at active quality complete charge deputy.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.3
• /
• pp.453-460
• /
• 2014

Fault injection attack is the process of attempting to acquire the information on-chip through inject artificially generated error code into the cryptographic algorithms operation (or perform) which is implemented in hardware or software. From the details above, the laser-assisted failure injection attacks have been proven particularly successful. In this paper, we propose an improved laser probing system for fault injection attack which is called the Dual-Laser FA tool set, a hybrid approach of the Flash-pumping laser and fiber laser. The main concept of the idea is to improve the laser probe through utilizing existing equipment. The proposed laser probe can be divided into two parts, which are Laser-I for laser cutting, and Laser-II for fault injection. We study the advantages of existing equipment, and consider the significant parameters such as energy, repetition rate, wavelength, etc. In this approach, it solves the high energy problem caused by flash-pumping laser in higher repetition frequency from the fiber laser.