• 플랜트 저널
• /
• 제6권1호
• /
• pp.56-63
• /
• 2010

While the local plant market is reducing its volume, the plant market over the world since 2000s is rapidly expanding. The nation's construction companies, aggressively dedicated in launching out overseas plant market, increase the volume of orders in that sector, but there also are much difficulty in the project management as those projects ordered are gradually large scaled with more cutting-edge high-tech requirements along with comparatively higher risk. Though the local construction companies have developed their own types of measures to analyze the risk evaluation putting into practice, the specialized decision-making model for the overseas plant market or the risk measure understandable easily and applicable practically is not yet shown. This paper aims at providing the methodology to evaluate the risk by way of constructing the risk evaluation process in order to induce risk measuring elements through appropriate indexing system. Furthermore, through studying the risk management system, it aims to seek for a thorough risk management method from beginning of the project to the end.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.913-920
• /
• 2000

The hall and the projection room of the multiplex cinema being constructed on the sixth and seventh floors at Jeonpo-dong market, Pusan, is composed of structural beams and decks considering the structures self weight problem, and the following problems are expected: - Vibration and noise generated on the floors by moving audiences may annoy the audiences in the other hall - Vibration and noise generate on the floor of the nearby hall as the audiences walk through the alley near the projection room - Vibration and noise generate on the floor of the hall nearby the projection room as the film drops This study measured and reviewed the vibration amount of the seven representative transferring routes that were selected for the halls and the alley near the projection room. Based on the analysis, the model hall was constructed and the vibration in the hall was estimated after cutting the deck. Also, this study constructed the steel stairs and investigated the vibration transferring characteristics to decide whether to construct the steel stairs in the building. Finally, the results were evaluated by actually using the stairs and reviewed the appropriateness of the measurement.

• 한국결정성장학회지
• /
• 제29권6호
• /
• pp.264-269
• /
• 2019

UV LED 적용하여 가정용 소독기를 제조하기 위한 디자인을 연구하였다. UV LED 살균거리 및 시간데이터에 근거하여 가정용 소독기 디자인 개념을 제시하였다. 컴퓨터 보조디자인 소프트웨어, 3D 프린트, 레이저 절달 등 기술을 사용하여 3가지 서로 다른 UV LED 작동방식의 모델을 제작하였다. 이 모델 대해 장단점 분석을 진행하여 최종 디자인 방안을 도출하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.139-142
• /
• 2003

As composite materials are gaining wide acceptance in aircraft structure, repair of damaged composite is becoming an important issue. The issues in composite repair include high cost, material interchangeability, water ingression, and structural integrity. To address these problems, researchers have studied on the composite repair in various aspects. In this paper, an Internet-based advisory service (called Repair Advisory Service, RAS) for composite repair is proposed to increase efficiency for repair process. In the RAS system the web browser is used as its user interface, which provides easy access to the service. The RAS server provides web-based tools for failure prediction, Structural Repair Manual (SRM), automated prepreg cutting process, material properties, inventory and knowledge base. The computer codes implemented for repair design estimate the tensile failure and shear failure of repaired structures. The prediction of failure is based on the maximum strain criterion for tensile failure while elastic-perfect plastic shear failure model is applied for interfacial failure. The OEM's SRM is provided in the PDF format for viewing and searching by web browsers instead of looking up paper version SRM. The knowledge base in this site offers a room to share and distribute ideas, memos, publications, or suggestions from the repair engineers. The fabrication tool of RAS reads repair geometry from engineers then generates a CNC toolpath to cut prepreg patches. The RAS service is open to public and available at http://nano.gsnu.ac.kr/. Broad feedback from field technicians and engineers is welcome to improve the usefulness of RAS.

• 한국정밀공학회지
• /
• 제23권7호
• /
• pp.177-186
• /
• 2006

In order to realize a three-dimensional shape on CAD, the machining process has been widely used because it offers practical advantages such as precision and versatility. However, the traditional machining process needs a large amount of time in cutting a product and the remained material causes trouble such as inconvenience due to cleaning process. Therefore, a new rapid manufacturing process, Rapid Heat Ablation process (RHA) using the hot tool, has been developed. In this paper, the hot tool for RHA process is designed to minimize radius of heat affected zone. TRIZ well-known as creative problem solving method is applied to overcome the contradictive requirements of the hot tool. For the detailed design of the hot tool, numerical model is established with several assumptions. In order to verify the numerical results, surface temperature of the hot tool is measured with K-type thermocouple at the predetermined location. Numerical and experimental results show that the devised hot tool fulfils its requirements. The practicality and effectiveness of the designed hot tool have been verified through experiments.

• Journal of Welding and Joining
• /
• 제19권1호
• /
• pp.49-57
• /
• 2001

In this study, the residual stress fields of multi-pass welded were analyzed by FEA under various geometrical conditions. In order to estimate the effects of pipe geometries on residual stress distribution, welding processes of each model were performed under the same heat cycles. And then, the influence of cutting off the weld bead on the residual stress redistribution was also estimated. From the results, in the range of t/D=0.05, axial residual stresses on the outer surface of the welded pipe were linearly decreased with pipe diameter increase. On the other hand, hoop residual stresses were not influenced by them. And both axial and hoop residual stresses on the outer surface of the welded pipe were increased with pipe diameter increase. But, when t/D was smaller than 0.05, they were converged in the nearly same value. The maximum residual stresses were generated at around HAZ. It in therefore necessary to consider them in welding design, strength evaluation, and analysis of fracture characteristics.

• Journal of the Korean Wood Science and Technology
• /
• 제24권2호
• /
• pp.71-80
• /
• 1996

Handling the manufacured goods is the most cost-consuming task in material handling system in wooden furniture industries. Fully automated warehouse for cartoned goods of a furniture manufacturing company was analized to provide plant engineers and managers with some important informations on the utility and profitability of the automated storage and retrieval system(AS/RS). Process-oriented simulation modeling tech-niques were used to describe the system and to propose some alternatives to promote the efficiency of AS/RS. Simulation report could be inter-preted as follows: 1. Warehouse for the furniture goods must be designed in accordance with reliable material handling program and constructed with suitable equipments depending on the specification of packed products. 2. An excess of palletized products induced the indigestion and the inefficiency of AS/RS of the furniture industry and put this high-costly system into the shade. 3. Overcrowded AS/RS of the furniture factories could regain its material handling function by cutting down the deposit of products into the automated warehouse. For this purpose, reducing the regular output and direct delivering the outside products to the destination should be considered as the definite counterplan. And additional operation of conventional handy warehouse was also expected to improve the efficiency of main AS/RS.

• 한국분말재료학회지
• /
• 제24권5호
• /
• pp.389-394
• /
• 2017

Ni wires with a diameter and length of 0.4 and 100 mm, respectively, and a purity of 99.9% are electrically exploded at 25 cycles per minute. The Ni nanopowders are successfully synthesized by a pulsed wire evaporation (PWE) method, in which Ar gas is used as the ambient gas. The characterization of the nanopowders is carried out using X-ray diffraction (XRD) and a high-resolution transmission electronmicroscope (HRTEM). The Ni nanopowders are classified for a multilayer ceramic condenser (MLCC) application using a type two Air-Centrifugal classifier (model: CNI, MP-250). The characterization of the classified Ni nanopowders are carried out using a scanning electron microscope (SEM) and particle size analysis (PSA) to observe the distribution and minimum classification point (minimum cutting point) of the nanopowders.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권12호
• /
• pp.4242-4268
• /
• 2014

The Cyber-Physical System (CPS) is a term describing a broad range of complex, multi-disciplinary, physically-aware next generation engineered system that integrates embedded computing technologies (cyber part) into the physical world. In order to define and understand CPS more precisely, this article presents a detailed survey of the related work, discussing the origin of CPS, the relations to other research fields, prevalent concepts, and practical applications. Further, this article enumerates an extensive set of technical challenges and uses specific applications to elaborate and provide insight into each specific concept. CPS is a very broad research area and therefore has diverse applications spanning different scales. Additionally, the next generation technologies are expected to play an important role on CPS research. All of CPS applications need to be designed considering the cutting-edge technologies, necessary system-level requirements, and overall impact on the real world.

• 복식문화연구
• /
• 제17권2호
• /
• pp.225-237
• /
• 2009

This study started with the cognition of problem that design activities closely related to industries could cause damages to the environment. The purpose of this study was to suggest a new concept of fashion design for environment using pre-consumer textile wastes which are produced in cutting process and used to be disposed in landfill sites. To achieve the purpose of this study, the literatures about fashion design for environment were reviewed, and design process including design development, producing, and presentation was performed. As a result, three fashion designs for environment using textile wastes were suggested. The results of this study were followings. Using pre-consumer textile wastes, this study suggested realistic way of fashion design for environment which is not just showing environment image, but providing practical use as well as preventing the waste of resources. Second, through constructing textile wastes, both 2-dimensional and 3-dimensional designs were possible, and unexpected effects created new value of beauty. Third, because the amount and type of pre-consumer textile wastes are unlimited, this fashion design for environment could be considered as continuous profit model.