• 한국지반공학회논문집
• /
• 제30권10호
• /
• pp.19-31
• /
• 2014

원심모형실험 중 지반모형의 상태 변화를 입체적으로 파악하기 위한 방법으로 전기비저항 탐사를 시도하였다. 탐사 시스템은 현장에서 널리 사용되는 검증된 상용 장비를 바탕으로 하였다. 컴퓨터 원격 조정으로 실험 시설 내에 설치된 탐사 장비를 통제하고 실시간 해석을 통해 결과 영상을 원심 모형실험 중에 바로 확인할 수 있도록 구성하였다. 구축된 탐사 시스템의 안정적 구동 여부를 점검하기 위해 불포화상태로 조성된 모형 지반 상단에 염수를 떨어뜨려 지반 내부로 이동하게 하고 전기비저항 탐사를 수행하였다. 10g로 원심력을 가한 상태에서 실험을 수행하고 시간대별 염수 침투상황을 전기비저항 영상으로 확인하였으며 일반 중력장에서 동일하게 실험한 결과와 비교하였다. 실험 종료 뒤 모형지반 수직 절단면을 이용하여 직접 측정한 전기비저항 값과 획득한 영상을 비교함으로써 신뢰성을 검증하였다.

• 자원ㆍ환경경제연구
• /
• 제17권3호
• /
• pp.61-89
• /
• 2008

환경세를 포함한 친환경 조세정책이 경제성장에 미치는 영향에 관한 논쟁은 현재 진행형이다. 본 연구의 목적은 소득세와 노동세가 존재하는 상황에서 친환경 조세정책을 도입했을 때 그것이 경제성장에 미치는 영향을 내생적 성장모형을 통해 이론적 실증적으로 규명하는 데 있다. 본 논문은 이론적으로 크게 두 가지에 초점을 맞추고 있다. 첫째, 환경세수가 오염저감기술 개발을 위한 R&D 투자를 충분히 감당하지 못할 경우 다른 조세의 왜곡이 발생하게 되는데, 이 때 왜곡이 발생하는 조건과 왜곡의 정도를 분석하였다. 둘째, 세수 중립하에서 환경세율이 증가할수록 조세간의 상호작용으로 인해 일부 조세의 세율이 인상될 경우 환경세가 경제성장에 미치는 영향을 살펴보았다. 또한 환경세를 도입한 유럽의 14개 OECD 국가들을 대상으로 실증분석을 수행한 결과, 첫째, 환경세로 인한 다른 조세의 왜곡을 완화시키기 위해 추가적인 조세인하 정책이 필요할 경우 노동세가 소득세보다 효율적인 것으로 나타났다. 둘째, 유럽 국가들이 친환경 조세정책을 도입하는 과정에서 오히려 소득세에 대한 부담은 증가한 반면, 노동세에 대한 부담이 경감되었다는 실증적 근거는 충분하지 않은 것으로 분석되었다.

• 유통과학연구
• /
• 제16권2호
• /
• pp.67-81
• /
• 2018

Purpose - Recently the importance of green consumption and corporate social responsibility has been increasing, thereby enhancing the importance of green consumption space as well. The retail space, as a representative consumption space, is now consuming more energy by introducing bigger retail space, 24-hour operation, cutting-edge equipment, and manless checkout system. Especially for retailers, who are constantly interacting with consumers, not only the economic consideration but also the consumer experience via retail service and physical retail space is crucial for their success. Therefore, this study intends to understand the main factors of motivating consumer perception about green retail space. In addition, we further investigate the mediating and moderating variables to encourage revisit intention and green retail space image. Research design, data, and methodology - In order to test our hypotheses with two models, we conducted a survey using questionnaires. In model 1, 356 respondents were surveyed to determine whether consumers' green attitudes and behaviors enhance environmentally friendly perception on retail space properties. In model 2, a questionnaire survey was conducted on 69 consumers who have experience in green retail space. Questionnaire surveys were conducted with on-line panels in Korea and analyzed using regression model and Hayes' PROCESS macro. Results - We found that consumers with green attitude put more importance on the attributes of green retail space. Also, the utility of the green retail space was found to be significant in emotional and social benefits. And, the consumers, who perceived the importance of green retail space, show higher revisit intentions. The emotional and social utilities have significant positive effects on revisit intention through green retail space image. Conclusions - This study demonstrates that a green retail space can induce positive consumer utility, thereby increasing green retail space image and revisit intention. Thus, in order to increase the image and revisit, retailers should communicate green messages with consumers, enhance green attributes of retail space, and target green consumers. To do so, we suggest that various marketing efforts such as publicity and education are needed to appeal experiential green products and retail space to consumers.

• Journal of the korean society of oceanography
• /
• 제37권3호
• /
• pp.125-133
• /
• 2002

Water and salt budgets in the Yellow Sea and Bohai are analyzed based on the historical data and CTD data collected recently using box models. The amounts of volume transport and of water exchange across the boundary between the Yellow and East China Seas are estimated to be 2,330-2,840 $\textrm{km}^3$/yr and 109-133 $\textrm{km}^3$/yr, respectively, from the one-layer box model. Corresponding water residence time is 5-6 years. In the Bohai, water residence time is twice as long as that in the Yellow Sea, suggesting that the Yellow Sea and Bohai cannot be considered as a single system in the view of water and salt budgets. The results indicate that water and salt budgets in the Yellow Sea depend almost only on the water exchange between the Yellow and East China Seas. The computation with the coupled two-layer model shows that water residence time is slightly decreased to 4-5 years for the Yellow Sea. In order to reduce uncertainties for the budgeting results the amount of the discharge from the Changjiang that enters into the Yellow Sea, the vertical advection and vertical mixing fluxes across the layer interface have to be quantified. The decreasing trend of the annual Yellow River outflow is likely to result that water residence time is much longer than the current state, especially for the Bohai. The completion of the Three Gorges dam on the Changjiang may be change the water and salt budgets in the Yellow Sea. It is expected that cutting back the discharge from the Changjiang by 10% through the dam would increase water residence time by about 10%.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.52-57
• /
• 1999

Funtional metal prototypes are often required in numerous industrial applications. These components are typically needed in the early stage of a project to determine form, fit and function. Recent R/P(Rapid Prototyping) part are made of soft materials such as plastics, wax, paper, these master models cannot be employed durable test in real harsh working environment. Parts by direct metal rapid tooling method, such as laser sintering, by now are hard to get net shape, pores of the green parts of powder casting method must be infiltrated to get proper strength as tool, and new type of 3D direct tooling system combining fabrication welding arc and cutting process is reported by song etc. But a system which can build directly 3D parts of high performance functional material as metal part would need long period of system development, massive investment and other serious obstacles, such as patent. In this paper, through the rapid tooling process as silicon rubber molding using R/P master model, and fabricate wax pattern in that silicon rubber mold using vacuum casting method, then we tranlsated the wax patterns to numerous metal prototypes by new investment casting process combined conventional investment casting with rapid pototyping & rapid tooling process. with this wax-injection-mold-free investment casting, we developed new investment casting process of fabricating numerous functional metal prototypes from one master model, combined 3-D CAD, R/P and conventional investment casting and tried to expect net shape measuring total dimension shrinkage from R/P part to metal part.

• Journal of Mechanical Science and Technology
• /
• 제19권5호
• /
• pp.1158-1168
• /
• 2005

A shunt from the left ventricle to the left anterior descending artery is being developed for coronary artery occlusive disease, in which the shunt or conduit connects the the left ventricle (LV) with the diseased artery directly at a point distal to the obstruction. To aid in assessing and optimizing its benefit, a computational model of the cardiovascular system was developed and used to explore various design conditions. Computational fluid dynamic analysis for the shunt hemodynamics was also done using a commercial finite element package. Simulation results indicate that in complete left anterior descending artery (LAD) occlusion, flow can be returned to approximately 65% of normal, if the conduit resistance is equal for forward and reverse flow. The net coronary flow can increase to 80% when the backflow resistance is infinite. The increases in flow rate produced by asymmetric flow resistance are enhanced considerably for a partial LAD obstruction, since the primary effect of resistance asymmetry is to prevent leakage back into the ventricle during diastole. Increased arterial compliance has little effect on net flow with a symmetric shunt, but considerably augments it when the resistance is asymmetric. The computational results suggest that an LV-LAD conduit will be beneficial when the resistance due to artery stenosis exceeds 27 PRU, if the resistance is symmetric. Fluid dynamic simulations for the shunt flow show that a recirculating region generated near the junction of the coronary artery with the bypass shunt. The secondary flow is induced at the cutting plane perpendicular to the axis direction and it is in the attenuated of coronary artery.

• Structural Engineering and Mechanics
• /
• 제89권3호
• /
• pp.253-263
• /
• 2024

Slope stability is generally paid more attention to in slope protection works, especially for slope containing weak layers. Two indexes of safety factor and failure model are selected to perform slope stability. Moreover, the finite element limit analysis method comprehensively combines the advantage of the limit analysis method and the finite element method obtaining the upper and lower bounds of the safety factor and the failure mode under the slope stability limit state. In this study, taking a waste dump containing a weak layer as an engineering background, the finite element limit analysis method is adopted to explore the potential failure mode. Meanwhile, the sensitivity analysis of slope stability is performed on geometrical and geotechnical parameters of the waste dump. The results show that the failure mode of the waste dump slope is two wedges if the weak layer is located on the ground surface (Model A), while the slope can be observed as three wedges failure if the weak layer is below the ground surface (Model B). In addition, both failure modes are highly sensitive to the friction angle of the weak layer and the shear strength of waste disposal, and moderately sensitive to the heap height, the dip angle and cohesion of the weak layer, while the toe cutting has limited effect on the slope stability. Moreover, the sensitivity to the excavation of the ground depends on the location of the weak layer and failure mode.

• 한국초지조사료학회지
• /
• 제39권1호
• /
• pp.45-52
• /
• 2019

본 시험은 목장 경영형태에 따른 산지초지 조성시 생산성과 사료가치의 변화를 관찰하기 위하여 수행되었다. 시험에 이용된 초지는 강원도 평창군에 위치한 서울대학교 평창캠퍼스의 시험목장내에 2014년 9월 3일에 조사료 생산형(Forage production type, FP; 오차드그라스 18 + 톨페스큐 12 + 티머시 5 + 화이트클로버 5 kg/ha) 초지와 공공 목장형 (Public farm type, PF; 오차드그라스 12 + 톨페스큐 18 + 티머시 5 + 화이트클로버 5 kg/ha) 초지를 각각 0.5ha씩 조성을 하여 매년 4회 수확 또는 방목을 실시하였으며 파종된 목초의 생육특성, 수량 및 사료가치를 조사하였다. 초장은 화본과목초는 1차 수확시 가장 길었으며 두과목초는 2차 수확시에 가장 길었다. 건물함량은 매년 1차 수확시 가장 높았으며 2차 수확시 유의적으로 낮았다 (p<0.05). 그러나 2년차에서는 2차, 3차 및 4차 수확에 따른 차이는 없었다 (p>0.05). 식생변화에 있어서는 조성이후 시간이 경과함에 따라 두과목초의 비율이 점차 증가되는 경향을 보였으며 2차 및 3차 수확시 잡초와 나지의 비율이 높았지만 4차 수확시는 줄어들었다. 생초 수량은 1년차 전 수확시기에서 목장 형태별 유의성이 있었으나 2년차에서는 유의적인 차이가 없었다. 건물 수량도 생초수량과 같은 경향을 보였으며 전체적으로는 조사료 생산형 초지의 수량이 유의적으로 높게 나타났다 (p<0.05). 공공목장형 초지의 가축 섭취량은 1년차에서는 1,452 kg/ha 이었으나 2년차에는 1,743 kg/ha로 더 높았으며 방목이용율은 3차 방목시 가장 높게 나타났다. 경영형태별 초지의 사료가치는 큰 차이가 없었으나 수확시기 간에는 차이가 나타났다. 조단백질 함량은 1차 수확시 가장 낮았으며 TND 함량은 1차 수확시 가장 높았고 RFV 값은 4차 수확시 가장 높았다. 이상의 결과를 종합하여 볼 때 한국형 산지초지 조성을 위해서는 현장 상황에 맞는 초지의 조성이 중요하며 생산성에 있어서는 조사료 생산형 모델이 더 우수한 것으로 나타났으며 도출된 결과들은 향후 공공목장형 초지 이용을 위한 기초 자료로 제공되었으면 한다.

• 한국태양에너지학회 논문집
• /
• 제27권3호
• /
• pp.169-174
• /
• 2007

Building integrated photovoltaic(BIPV) system operates as a multi-functional building construction material. They not only produce electricity, but also are building integral components such as facade, roof, window and shading device. As PV modules function like building envelope in BIPV, combined thermal and PV performance should be simultaneously evaluated. This study is to establish basic Information for designing effective BIPV by discovering relations between temperature and generation capability through experiment when the PV module is used as roof material for houses. To do so, we established 3kW full scale mock-up model with real size house and attached an PV array by cutting in half. This is to assess temperature influence depending on whether there is a ventilation on the rear side of PV module or not.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 토목섬유 학술발표회 논문집
• /
• pp.85-94
• /
• 1999

Reinforced Soil Wall has several merits comparing with conventional retaining wall. The conventional method has the limit of wall height, ununiform settlement of the foundation ground, quality assurance of the embankment body, shortening of construction period, economical construction and so on. Basis of previous mentioned things reinforced soil wall is the substitutional method of conventional retaining wall and its necessity is continuously increasing. The embanking material used in reinforced soil wall is generally limited such as a good quality sandy soil, and in many case constructors have to transfer such a good embanking material from far away to construction site. As a result, they would pressed by time and economy. If poor soils could be used embanking material, for example, clayey soil produced in-situ by cutting and excavation, the economical merit of reinforced soil wall would be increased more and more. Likewise, a lot of study about laboratory experimental behavior of reinforced soil wall using a good quality soil is being performed, but is rare study about clayey soil containing much volume of fine particle relatively in korea. In this study, the authors investigated behavior of the geosynthetic reinforced and unreinforced soil walls using clayey soil as embanking material in view of horizontal movement of walls, bearing capacity and reinforcement stress.