• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.97-101
• /
• 1996

In this paper, We have studied internal quality incluiding chemical compositions, microscopic structrue and nonmetalic inclusion of test materials. We have analyzed dynamic characteristics of cutting resistence including tensile strength value, hardeness value, impact value etcs. We have compared chip treatments of test materials. In analyzing internal quality, all of test materials have typical ferrite+pearlite structure. But, nonmetallic inclusion have oxide and sulfide inclusion in medium carbon steels, mainly sulfide inclusion is existed in S-free cutting steels. In Ca+S-free cutting steels, calcium aluminate and sulfide complex inclusion, had low-melting points, as deformation of sulfide and oxide inclusion is existed. machining characteristics, cutting resistence is maximum in Ca+S-free cutting steels, minimum in medium carbon steels. Chip treatements are excellent in S-free cutting steels, similar to the Ca+S free cutting steels and medium carbon steels.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.724-729
• /
• 2000

In end milling process the undeformed chip thickness and the cutting force components vary periodically with phase change of the tool. In this study, up end milling process is transformed to the equivalent oblique cutting. The varying undeformed chip thickness and the cutting force components in end milling process are replaced with the equivalent average ones. Then it can be possible to analyze the chip-tool friction and shear process in the shear plane of the end milling process by the equivalent oblique cutting model. According to this analysis, when cutting SM45C steel, 72% of the total energy is consumed in the shear process and the balance is consumed in the friction process.

• 대한기계학회논문집A
• /
• 제25권10호
• /
• pp.1520-1527
• /
• 2001

In end milling process the undeformed chip thickness and the cutting force components vary periodically with phase change of the tool. In this study, up end milling process is transformed to the equivalent oblique cutting. The varying undeformed chip thickness and the cutting force components in end milling process are replaced with the equivalent average ones. Then it can be possible to analyze the chip-tool friction and shear process in the shear plane of the end milling process by the equivalent oblique cutting model. According to this analysis, when cutting SM45C steel, 72% of the total energy is consumed in the shear process and the balance is consumed in the friction process.

• 한국정밀공학회지
• /
• 제31권5호
• /
• pp.395-401
• /
• 2014

Development of five axis tool grinding machine and CAD/CAM systems increase tool design flexibility. In this research, investigated are cutting characteristics of ball-end mill with different helix angle. Special WC ball-end mills with $0^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$ helix angles are designed and used in various cutting tests. Machining performance according to helix angle variation is evaluated from cutting forces, surface roughness, tool wear, produced chip shape, and vibration characteristics. The ball-end mill with $10^{\circ}$ helix angle shows the best cutting performance due to appropriate chip load distribution and smooth chip flow. This research can be used for cutting edge geometry optimization and novel design of ball-end mill.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.1008-1011
• /
• 2001

The purpose of this paper is to evaluate the chip breakability during turning using the experimental equation, which is developed by an orthogonal array method. The chip breaking index(CB), non-dimensional parameter is used in the evaluation of chip breakability. The analysis of variance(ANOVA)-test has been used to check the significance of cutting parameters. And using the result of ANOVA-test, the experimental equation of chip breakability, which consists of significant cutting parameters, has been developed.

• 대한기계학회논문집A
• /
• 제23권6호
• /
• pp.979-987
• /
• 1999

In a high precision vertical machining center, the estimation of cutting forces is important for many reasons such as prediction of chatter vibration, surface roughness and so on, and cutting forces are difficult to predict because they are very complex and time variant. In order to predict the cutting forces of end-milling process for various cutting conditions, a mathematical model is important and this model is based on chip load, cutting geometry, and the relationship between cutting forces and chip loads. Specific cutting force coefficients of the model have been obtained as interpolation function types by averaging farces of cutting tests. In this paper, the coefficients are obtained by neural network and the results of the conventional method and those of the proposed method are compared. The results show that the neural network method gives more correct values than the function type and that in teaming stage as the omitted numbers of experimental data increases the average errors increase.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.139-144
• /
• 1991

본 연구에서는 절삭가공시 생성되는 칩의 형상해석의 일환으로 2차원 절삭시 칩은 절삭날에 수직한 방향으로 공구경사면을 흘러간다는 기본적인 전제조건과 Kluft 등의 칩흐름각 예측에 대한 제안중 노으즈반경(nose radius) 및 기울임각의 영향을 중 첩시키고, 또한 절삭날에 연하여 미변형 칩두께(undeformed chip thickness)가 달라지 는 경우 칩흐름의 세기는 이에 비례한다는 Baart등의 가정을 도입하여 칩흐름각에 대 한 새로운 해석을 시도하였다.

• 한국정밀공학회지
• /
• 제6권1호
• /
• pp.45-51
• /
• 1989

In metal cutting various types of chips are produced in consequence of cutting conditions. According to the type of chips the cutting mechanism is to be changed. Most of the cutting theory is based on the continuous chip because of its convenient analysis, but the occurrence of the saw-toothed chip depends upon the workpiece and/or the cutting conditions, one of which is titanium alloy used widely. Nowadays titanium alloys are used widely with the rapid development of aerospace structural engineering application, whereas the theory of cutting mechanism has not been established yet, and the formatting process has not been understood satisfactorily, either. Unfortunately several misconceptions, conflicting statements and statements needing further clarifi- cation are also found. In this paper an attempt is made to clarify the formation process of saw-toothed chips which are to be produced during the orthogonal cutting process of titanium alloys. They were machined at low speed to avoid the rapid tool wear. We observed the SEM-photographs of chips taken at the quick-st- opping device. It is hoped that a rational model of the mechanics of cyclic chip formation can be developed. The results obtained are as follows. 1. When a saw- toothed chip is formed, the shear band begins at the primary shear zone and trans- fers to the free surface, so that a segment is produced and it is completed by upsetting between the formatting segment and the formatted segment. 2. As the rake angle or the clearance angle increases in the machining of the titanium alloy, the chip approaches to that of the continous type. 3. When the rake angle and the clearance angle are increased the shear energy and the unit friction energy decrease, which shows the same aspect as that of the continuous chip.

• 한국산학기술학회논문지
• /
• 제16권9호
• /
• pp.5748-5755
• /
• 2015

스크라이빙 공정은 LED 칩 생성을 위한 절단 공정으로 칩의 특성 및 생산량을 결정하는 중요한 공정이다. 기존의 기계적 방식 및 레이저 방식의 스크라이빙 공정은 칩의 열 변형 및 강도 저하, 절단 영역의 제한 등의 문제점이 있다. 이러한 문제를 해결하기 위해 웨이퍼 내부에 공극을 생성하여 자가 균열을 유도하는 내부 레이저 스크라이빙 공정이 연구되고 있으나 LED 칩 제작을 위한 사파이어 웨이퍼의 절단에 대한 연구는 미비한 실정이다. 본 논문은 LED 칩 제작에 사용되는 사파이어 웨이퍼의 내부 레이저 스크라이빙 공정을 적용하기 위해 주요 가공 변수를 정립하고 가공 실험을 통하여 절단 특성을 분석함으로써 내부 레이저 스크라이빙 시스템 구축을 위한 기초 가공 조건을 확립하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1551-1554
• /
• 2005

The Titanium has many superior characteristics Which are specific strength, heat resistance, corrosion resistance, organism compatibility, non-magnetic and etc. and their quantity are abundant. this study performed turning operation of Ti-6Al-4V alloy using the TiAlN Coate Tool which treated PVD (Physical Vapor Deposition). Experimental works are also executed to measure cutting force, chip figuration and surface roughness for different cutting conditions. As a result of study. Tool wear was serious at over 100m/min of cutting speed and cutting condition was excellent at 1.0mm of cutting depth.