• 한국정밀공학회지
• /
• 제34권1호
• /
• pp.35-39
• /
• 2017

We used a construction method using a CNC milling machine, where free-formed molds were made by cutting EPS (Expanded PolyStyrene) foam with the CNC machine, to build free-formed buildings. CNC milling is off-the-shelf technology that can easily cut EPS foam; however its production cost is too high and the time to manufacture an EPS mold is too long. This paper proposes a novel cutting machine with a fast and cost effective mechanism to manufacture EPS concrete molds. Our machine comprises a cutter and Cartesian coordinate type moving mechanism, where the cutter cuts EPS foam using a hotwire in the shape of '$\sqcap$' and is capable of adjusting its cutting angle in real-time while keeping its cutting width. We proved through cutting experiments on the CNC machine that cutting time was greatly shortened compared to the conventional method and that the resulting concrete mold satisfied manufacturing precision.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.892-897
• /
• 2000

In this study, tap wear was analyzed not only to predict the tap life time but also to propose an improved tap design. Because rake angle and thread relief of tap are the significant factors in geometry of tap, these two factors were picked as the experiment variables. The experiment was conducted with six types of tap which have 6$^{\circ}$ , 8$^{\circ}$ and 12$^{\circ}$ of rake angles with 0,08mm and 0.14 mm of thread relief. From the measured cutting force, it could be known that cutting torque was low at the large the rake thread relief and tool life was long as rake angle became large. Eventually, tool life is longest when rake angle is 12$^{\circ}$ and the with 0.08mm thread relief. Aand the width of crater wear and that of flank wear were measured when a tapping torque was 20 [$kg_f$-mm] . Most of the measured values were above the width of tool wear[$V_B$=O.O3m], which means that tool life is over.

• 한국의류학회지
• /
• 제28권6호
• /
• pp.776-783
• /
• 2004

The purpose of this study was to identify the reasonable gathering conditions as consider of effect of gathering and variation of silhouette made by gathering conditions. The experimental design consists of four factorial design: (1) three kinds of different weight and different thickness fabrics (2) three kinds of different stitch densities (3) five kinds of different ratio of gathers (4) three kinds of different angles. Therefore one hundred thirty five (135) samples were made. Data analysis utilize SPSS WIN 10.0 Package. The results of this study were as follows: 1. In the aspect of fabrics, it is shown the visual propriety that it is as thin as the small stitch, and as thick as the big stitch. 2. As stitch densities, it shows the different stabilized nodes. 3. In the aspect of ratio of gathers, it is shown the visual propriety that a few was small stitches, which help formations of nodes, and a lot were big stitches, which help increased the effect of gather. 4. In the aspect of angle of bias, the drape appearance was excellent as a sample of cutting by 0 angle(0$^{\circ}$) of bias. The big stitches that help formations of stabilized nodes, and a case of cutting by 45 angle(45$^{\circ}$) of bias was small stitch.

• 청정기술
• /
• 제14권2호
• /
• pp.95-102
• /
• 2008

친환경적인 대체 세정제를 채택하기 위해서는 세정제의 세정성, 환경성, 경제성을 평가하여 체계적인 선정절차에 의거하여 도입 적용하여야 하며 객관적이고 효율적인 세정성 평가방법의 정립이 현시점에서 매우 중요하다. 따라서 본 연구에서는 여러 세정성 평가 방법들 중 광전자방출법(optically stimulated electron emission)(OSEE)을 활용한 세정성 평가에 관한 연구를 하였다. 실험에 사용된 오염물은 플럭스, 솔더, 그리스, 절삭유, 그리고 그리스 35%와 절삭유 65%을 혼합하여 만든 혼합 오염물로서 세정제에 의한 이들의 세정성을 평가하였다. 본 연구실에서 개발하였거나 조제한 세정제를 이용하여 세정 후 OSEE법 측정 결과와 중량법 및 접촉각측정법에 의한 세정성 평가방법을 비교 분석하였다. 본 연구 결과로 플럭스와 혼합오염물을 세정한 경우의 OSEE 세정효율은 중량법과 거의 유사한 결과를 나타내었지만, 솔더와 그리스 세정의 경우는 UV를 반사 또는 흡수하여 중량법과 비교할 수 없었다. 그리고 절삭유 세정의 경우 실질적으로 눈에 보일 정도로 피세정물 표면에 오염물이 남아 있음에도 불구하고 중량법 측정 시 100%의 세정효율을 보임으로써 중량법 측정의 한계를 보였지만 OSEE법으로는 미소잔류 절삭유의 존재를 측정할 수 있었다. 또한 OSEE법과 접촉각측정법의 세정성을 비교측정한 결과로 플럭스, 혼합 오염물 그리고 절삭유의 세정성 평가는 OSEE법과 접촉각측정법이 유사한 세정효율을 보여주었다. 그리고 솔더와 그리스 세정은 접촉각측정법이 OSEE법보다 더욱 정밀하게 세정성을 평가할 수 있는 것으로 판단되었다.

• 한국정밀공학회지
• /
• 제4권4호
• /
• pp.84-92
• /
• 1987

To investigate the influence of the cutting pressure on the laser cutting quality, an expermental facility was constructed which can measure the cutting pressure distribution for various cutting conditions. Flow visualization was performed using the Schlieren photography and the pressure acting on the workpiece surface was measured, corresponding to the important process variables such as the kind of assist gas, nozzle pressure, distance between the nozzle exit and the workpiece surface, and the presence of the secondary nozzle. The cutting pressure acting on the workpiece was largely influenced by the nozzle pressure and nozzle-workpiece distance. The secondary nozzle which is used to raise the effective working pressure had its obvious role only when the angle between it and the main nozzle was small and when the distance between the nozzle exit and the workpiece surface was large.

• Journal of Mechanical Science and Technology
• /
• 제17권2호
• /
• pp.239-245
• /
• 2003

Ultra precision diamond cutting is a very efficient manufacturing method for optical parts such as HOE, Fresnel lenses, diffraction lenses, and others. During micro cutting, the rake angle is likely to become negative because the tool edge radius is considerably large compared to the sub-micrometer-order depth of cut. Depending on the ratio of the tool edge radius to the depth of cut, different micro-cutting mechanism modes appear. Therefore, the tool edge sharpness is the most important factor which affects the qualities of machined parts. That is why diamond, especially monocrystal diamond which has the sharpest edge among all other materials, is widely used in micro-cutting. The majar issue is regarding the minimum (critical) depth of cut needed to obtain continuous chips during the cutting process. In this paper, the micro machinability near the critical depth of cut is investigated in micro grooving with a diamond tool. The experimental results show the characteristics of micro-cutting in terms of cutting force ratio (Fx/Fy), chip shape, surface roughness, and surface hardening nea. the critical depth of cut.

• 공학기술논문지
• /
• 제11권4호
• /
• pp.227-235
• /
• 2018

Studies on the laser cutting processing characteristics of magnesium alloys can be divided into three parts, comparing the cutting faces of magnesium alloy and aluminum alloy, observing the shape of the corner where straight lines meet, and observing the straight lines and arcs. First, there were no laser cutting conditions for magnesium alloys, so it was observed to cut magnesium alloy and aluminum alloy under the same processing conditions as aluminum alloy to shape and surface of the cut surface. Next, to observe the characteristics of the corner, we observed the shape of the corner according to the angle change of the part where the two lines meet, and finally we observed various angles to observe the characteristics of the part where the arc meets the line. Finally, laser cutting processing characteristics of magnesium alloys and aluminum alloys obtained based on the above study contents were summarized.

• 로봇학회논문지
• /
• 제19권3호
• /
• pp.244-253
• /
• 2024

This paper presents a novel stem-cutting device using a twisted string actuation system combined with the cinch bag-typed gripper proposed in previous research. The suggested cutting device was developed to cut the stem of a tomato using two motors. The relationship between contact time and motor angle was mathematically induced, and the contacting time was verified through the experiments. The contact time has decreased as the offset of each pair of strings at the disk increases. The contact time and its deviation were reduced by increasing the radius of the twisted string bundle, and the motor torque to exert an equivalent cutting force was surged at the same time. The proposed cutting mechanism with 16 strands of twisted string bundle and 40 mm of offset can cut the given tomato stems and stalks, exerting up to 132.4 N of cutting force in 4.6 to 6.5seconds.

• 한국운동역학회지
• /
• 제21권4호
• /
• pp.391-395
• /
• 2011

To investigate the anticipatory effect on landing patterns during side-cutting maneuver, thirteen healthy female elite college soccer players participated in this study. Three-dimensional knee kinematics, effective mass and correlation between both these were measured and analyzed using a motion analysis and force plates. Each testing session included anticipated tasks, $45^{\circ}$ side-cutting tasks (AC), followed by a set of unexpected side-cutting (UC) in a random order. Knee flexion/extension, valgus/varus and internal/external rotation angles and effect mass were compared by using paired t-test. Also, correlation analysis was performed to identify the relationship between knee angles and effective mass. Effective mass during UC was greater than that during AC. Effective mass and maximum knee flexion angle were positively correlated during AC and not during UC. Based on the relationship between effective mass and knee flexion angle in AC, shock absorption can be controlled by knee joint flexion in pre-predicted movement condition. However, effective mass can not be controlled by knee flexion in UC condition. The unexpected load affects were more irregular on the knee joint, which may be one of the injury mechanisms of anterior cruciate ligament (ACL) in female soccer players.

• 한국터널지하공간학회 논문집
• /
• 제23권1호
• /
• pp.1-12
• /
• 2021

Tunnel boring machine (TBM)의 설계에 있어서 지반과 직접적으로 맞닿아 절삭을 담당하는 커터헤드의 설계에 따라서 장비의 굴진효율이 달라지게 된다. 디스크커터는 배치되는 위치에 따라 센터 커터 존, 이너 커터 존, 트렌지션 커터 존으로 구분된다. 기존에도 페이스커터의 최적 절삭조건을 규명하기 위한 연구는 많이 진행되어 왔으나, 트렌지션 커터의 최적 절삭조건을 규명하기 위한 연구는 상대적으로 미진하였다. 본 연구에서는 트렌지션 커터의 최적의 절삭조건을 규명하기 위해 개별요소법 수치해석을 수행하고 트렌지션 커터 사이의 각도에 따른 비에너지 곡선을 작도하여 최적 절삭조건을 알아보고자 하였다. 수치해석 결과 전이영역에서 최소 비에너지를 보이는 트렌지션 커터 사이의 각도 9°인 것으로 확인되었다. 이를 트렌지션 커터의 경사각에 따라 3가지 영역으로 구분하고 영역별 디스크커터 사이의 각도와 비에너지를 정리한 결과 트렌지션 커터의 경사각이 커질수록 최적 비에너지를 보이는 트렌지션 커터 사이의 각도는 10°에서 8°까지 점차 감소하는 경향을 보였다. 이러한 결과는 기존에 사용되고 있는 트렌지션 커터의 설계 결과와 유사한 경향으로써, 본 연구의 결과를 밑받침한다.