• 한국공작기계학회논문집
• /
• 제11권5호
• /
• pp.73-80
• /
• 2002

In this study, work materials of the ree form surface shape was machined by ball end mill cutter according to the change of cutting location and depth, and the acquired data of cutting force, tool deflection and shape accuracy were analyzed. Cutting force results were obtained with tool dynamometer and tool deflection values were measured by a couple of eddy-current sensors. Shape accuracy was obtained by roundness tester and surface profile measuring machine. As inclination angle was decreased, cutting force was increased. Cutting force showed large value at $105^{\circ}$ and $150^{\circ}$. Tool deflection was less at down milling than at up milling, decreased at 45$^{\circ}$ and 120$^{\circ}$, and shown large tool deflection at $150^{\circ}$. Roughness values were found to be bad in the inside of surface shape tool deflection. Surface accuracy was obtained better precision in down milling than in up milling.

• 펄프종이기술
• /
• 제47권5호
• /
• pp.23-32
• /
• 2015

In this study, chemical and physical changes of dissolving pulps which have similar viscosity by dry milling and fractionation were investigated. We used two types of dissolving pulp made from wood and cotton linter fiber, respectively. Dry milling was executed by knife cutter and pulp powders were fractionated by sieve shaker into 4 grades. We analyzed fiber properties, crystallinity index, viscosity, molecular weight of pulp sheet and powders. It was found that poly-dispersity index of cotton linter pulp was smaller than that of wood pulp, meaning that cotton pulp has more narrow molecular weight distribution. It was assumed that these were related to exposure times to chemical treatment which cut cellulose chains not evenly. At least 4 times of chemical treatments for wood pulp were executed and only two times of chemical treatments for cotton linter pulp were done. After dry milling average molecular weight and crystallinity index of cotton linter pulp powders were reduced and these were related to fines content and shape of pulp powders.

• 한국연초학회지
• /
• 제19권1호
• /
• pp.57-63
• /
• 1997

The composition of leaf surface lipid in Flue-cured tobacco and their changes during curing was investigated. The flue-cured variety, Nicotiana tabacum cv. NC 82 was cultivated at Eumsung experiment station in 1996. The samples of riced leaves with different stalk Position(Lugs, Cutter, Leaf and Tips) and different curing stage at half yellowing(24hr), yellowing(48 hr) , color axing(72 hr), midrib drying(96 hr) and cured(120 hr) were collected for analysis of leaf surface lipid. $\alpha$ - and $\beta$ - 4, 8, 13-Duvatriene-1, 3-diol($\alpha$, $\beta$-DVT) were major components in leaf surface lipid extracted with methylene chloride and sugar ester was detected slightly DVT content was increased with ascending stalk position, but increasing trend of total hydrocarbon was not observed. While DVT was decreased throughout curing of tobacco leaves, hydrocarbon content did not show significant change during curing process. Twenty-two duvane compounds were detected by capillary GC in duvane fraction isolated from leaf surface lipid and of which 11 compounds were identified by GC-MS. These compounds were decreased with curing in all stalk position.

• 대한기계학회논문집A
• /
• 제25권6호
• /
• pp.972-979
• /
• 2001

Tool fracture index(TFI) was developed in order not only to detect tool fracture but also to predict the amount of tool fracture in face milling. TFI is calculated by using peak-to-valley values of cutting force acting on teeth and their ratio between the adjacent teeth. When the tool fractures, a large value of TFI proportional to the amount of tool fracture was obtained periodically and decreased gradually. It was found that TFI is independent of cutter runout and it almost does not vary during transient cutting such as cutting condition change during machining. The threshold of tool fracture can be analytically determined by TFI developed in this paper, because the magnitude of TFI was shown to be dependent on the ratio of the amount of tool fracture to feed per tooth and immersion ratio. It was possible to predict the amount of tool fracture in experiments by using the proposed TFI.

• 한국농공학회지
• /
• 제17권4호
• /
• pp.3897-3920
• /
• 1975

Since the most of Korean dairy and cattle raising farms are too small to introduce western mechanized farming, it is necessary to develope small size equipments. This study has been carried to develop a rotary mower as on attachment of 8 to 10 horse powertiller which is widely spread in rural area. It will not ony be helpfull for the farmers to harvesting hay grass but also desirable to increase the power tiller utility. The protto type rotary mower designed through the fundamental investigations, has been modified and improved through the field trials, and a series of field tests has been carried to investigate its performance and economic feasibility comparing with existing vailable harvesting equipments. The results are as follows; 1. To increase the stability, two guide wheels are attached to both side of the protto type rotary mower. 2. To prevent the clinging of tall grasses, the vertical driving shafts are covered with cylindrical protectors. 3. The cutting height is adjustable in 8 steps from 2.5 to 20 centimeters by changing the length of guide wheel legs. 4. The practical Critical cutting speed were always higher than theoretical value in both case of single cutting blade and three when the cutting depth was 25 millimeter. 5. The peripheral speed of cutting blade was varied in response to the change of engine speed, mean while the peripheral speed was adequate as it was changhed from 25 to 35 meter per second when the power tiller is operated in proper working ground speed. 6. The time requirement to harvest 10 a were 88.7, 54.6 and 41.4 minutes for the first, second and third stage of ground speed respectively, and because of the difficulty of delivery, it was observed that operating with fourth stage of ground speed was not recomanendable when the grass height is taller than 90 centimeters. 7. The performance of rotary mower were 1.1-1.7, 1.4-4.0, 3.8-11.8 and 7.4-22.0 times of reciprocating mower, portable disc type cutter, hay scythe and ordinary sickle respectively. 8. When the slope exceeds, 20 degree the downward harvesting operation was impossible because of the excessive front end weight, while less than 5 degree of land slope did not effect in field operation. 9. Increased traveling spee caused higher cutting height and slight cutting failure, but seems not to effect to the gross yield, and the efficiency of cutting width were from 83 to 94 precent. 10. Tn rank of economy were rotary mower (3,2 stage operation), reciprocating mower, hay scythe, portable disc type cutter and sickle in order when the annul operation exdeeds 100 hours. From the above results, it is convinced that the protto type rotary mower is good enough to the livestock farmers as a hay harvesting equipment because of its economy, hardiness in operating and its out standing performance and hopefully it will contribute to the extension of Korean livestock farming.

• 한국터널지하공간학회 논문집
• /
• 제20권6호
• /
• pp.1039-1048
• /
• 2018

도심지 터널공사에서는 주변 건물의 안전성을 확보하고, 민원을 최소화할 수 있는 쉴드TBM 공법이 대부분 적용되고 있다. 도심지에는 기존의 택지를 매립조성하거나 개량하는 경우가 많기 때문에 지표에서부터 암반 경계부까지는 불균질한 상태로 이루어지는 경우가 많다. 이와 같이 토사지반, 파쇄정도가 다양한 화강암지반, 핵석층, 암층과 같이 복잡한 지반 조건에서 쉴드TBM으로 터널구조물을 구축하는 경우, 각 지반조건에 따른 쉴드TBM에 나타나는 기계데이터를 분석하여 지반조건에 따른 장비부하의 특징을 비교분석하였다. 그 결과, 설계막장압을 유지하면서 굴진하고, 주기적으로 커터를 점검하여 교체하는 경우, 배토량, 추력, 커터토오크의 경향으로 지반조건의 변화를 예측할 수 있을 것으로 판단된다.

• 한국토양비료학회지
• /
• 제42권4호
• /
• pp.274-279
• /
• 2009

지상원격탐사 센서를 이용한 황색종의 적숙엽 판단기준을 평가하기 위하여 성숙기에 중엽과 상엽부위에 대하여 수확엽의 녹색도를 5개 수준으로 구분하여 여러 가지 센서지표들의 상호관계를 평가하였다. 건조엽의 색 특성은 색차계(Colorimeter, CR-300)를 이용하여 L, a, b값을 측정하였고 건조엽의 청색도는 육안관찰에 의한 분포정도를 수치화하여 비교 검토하였다. 수확엽의 녹색도에 따른 반사율은 550nm와 675nm에서 녹색도가 증가할수록 감소되는 특성을 보였다. 건조엽의 반사율은 미숙된 엽이 건조된 후 녹색이 잔류되었기 때문에 미숙엽의 675nm 반사율이 더 낮아졌다. 그 결과 동일한 엽위에서 생엽과 건조엽의 반사율지표는 직선적인 정의 상관을 보였다. 또한 건조엽의 청색도는 모든 센서지표들과 유의성 있는 정의 상관을 보였고 명도를 나타내는 색차계 L값은 센서지표들과 유의성 있는 부의 상관을 보였다. 따라서 건조엽의 청색도로 평가된 센서 종류별 적숙엽의 기준은 엽록소 측정치 SPAD 값은 22 이하, 엽록소 측정치 CM-1000 값은 135 이하, 그리고 원격탐사센서 Crop Circle의 gNDVI 값은 0.43 이하로 평가되었다.

• 한국측량학회지
• /
• 제39권4호
• /
• pp.211-221
• /
• 2021

클로버는 잔디의 대표적 유해 식물로 양지식물인 잔디보다 일찍 생육활동을 시작하여 잔디의 상부에 수관을 형성하고 잔디의 광합성과 성장을 방해한다. 이로 인해 두 식생종 간 경쟁에서 대부분, 클로버 영역은 확산되고 잔디의 경우는 훼손과 고사가 진행되게 된다. 훼손된 부분은 장마 및 생장 휴면 기간 중, 토양표출 확산으로 전개되어 잔디 복구에 심리적 스트레스 및 많은 경제적 부담을 초래하고 있다. 본 연구의 목적은 잔디의 대표적 유해식물인 클로버를 구분하고 클로버의 확산에 따른 훼손지역 분포, 퇴치 전·후의 식생변화 추이를 고찰하는 것이다. 이를 위해 RGB, BG-NIR 센서를 탑재한 융·복합 드론기반 영상을 활용, 3가지 식생지수의 시계열 분석을 통해 선별적 퇴치를 위한 식생구분, 복구전략 수립을 위한 잔디 훼손 분포 등을 고찰하였다. 특히, 인력 및 기기에 의한 선별적 제초 및 예초 전·후, 클로버의 생태변화 추이를 시계열로 분석하였다. 또한, 잔디와 클로버의 성장 중반기 기간 중, 식생 종간 구분 방안도 모색하였다. 연구결과, 잔디와 클로버 생육 특성에 따른 RGB 및 BGNIR 드론영상의 MGRVI 및 NDVI, MSAVI 지수의 시계열 분석을 통해 잔디 훼손과 클로버 퇴치 후 변화 추이 분석의 활용성을 확인하여 잔디 유해 잡초에 대한 효율적 관리의 활용 가능성을 입증할 수 있었다.