Purpose: This study was conducted to investigate the hot air drying characteristics of squash slices depending on the drying conditions (input air velocity, input air temperature, and sample thickness). Methods: The developed drying system was equipped with a controllable air blower and electric finned heater, drying chamber, and ventilation fan. Squash (summer squash called Korean zucchini) samples were cut into slices of two different thicknesses (5 and 10 mm). These were then dried at two different input air temperatures (60 and $70^{\circ}C$) and air velocities (5 and 7 m/s). Six well-known drying models were tested to describe the experimental drying data. A non-linear regression analysis was applied to determine model constants and statistical indices such as the coefficient of determination ($R^2$), reduced chi-square (${\chi}^2$), and root mean square error (RMSE). In addition, the effective moisture diffusivity ($D_{eff}$) was estimated based on the curve of ln(MR) versus drying time. Results: The results clearly showed that drying time decreased with an increase in input air temperature. Slice thickness also affected the drying time. Air velocity had a greater influence on drying time at $70^{\circ}C$ than at $60^{\circ}C$ for both thicknesses. All drying models accurately described the drying curve of squash slices regardless of slice thickness and drying conditions; the Modified Henderson and Pabis model had the best performance with the highest R2 and the lowest RMSE values. The effective moisture diffusivity ($D_{eff}$) changes, obtained from Fick's diffusion method, were between $1.67{\times}10^{-10}$ and $7.01{\times}10^{-10}m^2/s$. The moisture diffusivity was increased with an increase in input air temperature, velocity, and thickness. Conclusions: The drying time of squash slices varied depending on input temperature, velocity, and thickness of slices. The further study is necessary to figure out optimal drying condition for squash slices with retaining its original quality.
양극 물질로 산화바나듐 박막, 고체전해질로는 LiPON 박막 그리고 음극 물질로는 리튬 금속 박막을 선택하여 $Li/LiPON/V_2O_5/Pt$ 구조의 전고상 박막 전지를 제작하였고 전지 특성을 평가하였다. 산화바나듐 박막은 여러 산소 분압에서 직류 반응성 스퍼터링으로 증착하여 전기화학적 특성을 분석한 결과 $20\%\;O_2/Ar$비에서 가장 우수한 가역 특성을 나타내었다. 직류 반응성 스퍼터링에 의해 산화바나듐 박막을 제작한 후 진공을 그대로 유지한 상태에서 r.f. 반응성 스퍼터링에 의해 LiPON 고체전해질 박막을 증착하였다. 그 후 dry room내에서 진공 열증착법에 의해 리튬 금속 박막을 증착하여 전고상의 박막 전지를 제작하였다. $Li/LiPON/V_2O_5$ 박막 전지를 전압 범위와 전류 밀도를 변화시켜 충방전 시험을 행한 결과 $7{\mu}A/cm^2$의 전류 밀도와 3.6-2.7 V의 전압범위에서 가장 우수한 가역 특성을 나타내었다. $Li/LiPON/V_2O_5$박막 전지로 초시계를 구동 시켰으며 이는 in-situ공정에 의해 제작된 박막 전지가 소자 에너지원으로의 응용 가능성을 보여 주었다.
Proliposomal patch of clenbuterol, ${\beta}_2-agonist$ bronchodilator, was prepared and its feasibility as a novel transdermal drug delivery system was examined. Proliposomal granules containing clenbuterol was prepared by a standard method using sorbitol and lecithin with (Rx 2) or without cholesterol (Rx 1). The porous structure of sorbitol in the proliposomes was maintained allowing tree flowability of the granules. Following contact with water, the granules were converted probably to liposomes almost completely within several minutes. It indicates that proliposomes may be hydrated, when they are applied on the skin under occlusive condition in vivo, by the sweat to form liposomes. Clenbuterol release from Rx 1 and Rx 2 proliposomes to pH 7.4 isotonic phospate buffer (PBS) across cellulose membrane (mol. wt. cut-off of 12000-14000) was retarded significantly compared with that from the mixture of clenbuterol powder and blank proliposomes. Interestingly, proliposomes prepared with lecithin and cholesterol (i.e., Rx 2 proliposomes) showed much more retarded release of clenbuterol than proliposomes prepared only with lecithin (i.e.. Rx 1 proliposomes), indicating that clenbuterol release from proliposomes can be controlled by the addition of cholesterol to the proliposomes. Proliposomal patches were prepared using PVC film as an occlusive backing sheet, two sides adhesive tape (urethane, 1.45 mm thickness) as a reservoir for proliposome granules and Millipore MF-membrane (0.45 mm pore size) as a drug release-controlling membrane. Rx 1 or Rx 2 proliposomes containing 4.6 mg of clenbuterol were loaded into the reservoir of the patch. Clenbuterol release from the patches to pH 7.4 PBS was determined using USP paddle (50 rpm)-over-disc release method. Clenbuterol release from the proliposomal patches was much more retarded even than from a matrix type clenbuterol patch (Boehringer Ingelheim ltd). Being consistent with clenbuterol release from the proliposomal granules, the release from the patches was highly dependent on the presence of cholesterol in the proliposomes : Patches containing Rx 2 proliposomes showed several fold slower drug release than patches containing Rx 1 proliposomes. When the patch containing Rx 1 proliposomes was applied on to the back of a hair-removed rat, clenbuterol concentration in the rat blood was maintained during 6-72 hrs. Transdermal absorption of clenbuterol from the patch was accelerated when the patch was prehydrated with 50 ml of pH 7.4 PBS before topical application. Above results indicate that sustained transdermal delivery of clenbuterol is feasible using proliposomal patches if the cholesterol content and pore size of the release rate-controlling membrane of patches, for example, are appropriately controlled.
본 연구는 OPEC의 감산합의 또는 투기적 비축 등과 같은 전략적 또는 자발적 수출제약으로 인해 필요한 원유를 충분히 확보하지 못할 때 발생하는 원유공급 위기가 우리 경제에 미치는 효과를 분석하였다. 원유가격의 변화가 예측이 불가능한 현상으로 가정하고 외생적인 변수로 간주하는 기존의 연구와 달리, 본 연구는 자발적 수출제약으로 인해 원유가격이 내생적으로 결정되는 동태적 연산 가능 일반균형 모형을 이용하여 원유공급 위기에 따른 파급효과를 분석하였다. 본 연구의 분석시나리오는 IEA의 단계별 비상조치에 근거하여 원유공급량이 BaU 대비 7%와 12% 감소하는 경우로 설정하였다. 모의실험 결과 원유공급이 7%와 12% 감소하면 원유도입가격은 약 17.3%와 33.5% 증가할 것으로 예측된다. 이에 따른 경제성장률은 약 0.52%p와 0.96%p 감소하는 것으로 추정된다. 다시 말하면 원유도입가격이 1% 증가하면 경제성장률은 0.03%p 감소하는 것에 해당한다. 반면 소비자물가는 0.8%p와 1.51%p 증가하여, 원유도입가격이 1% 증가하면 소비자물가는 약 0.045% 증가할 것으로 예측된다. 원유공급 위기가 발생하면 전력의 생산량은 감소하고 전력가격은 수요 감소로 인해 1차년도에 약간 감소하다가 생산비용 증가효과로 인해 전력가격은 상승하는 것으로 추정된다. 전원 믹스에 미치는 효과를 살펴보면, 석유제품의존도가 높은 화력과 자가발전의 생산량 감소가 상대적으로 큰 것으로 나타난다. 원유의 공급위기로부터 직접적인 영향을 받는 석유제품은 큰 폭으로 하락하는 반면 석탄과 열에너지는 대체효과로 인해 오히려 소비량이 증가하는 것으로 추정된다. 액화천연가스는 당해 연도에는 경기침체와 함께 소비량이 줄어들지만 시간이 지날수록 석유와의 대체관계로 인해 소비량이 증가할 전망이다. 생산량이 대폭 감소하는 석유제품산업은 가격이 큰 폭으로 상승하여 판매액은 오히려 증가한다. 열에너지와 석탄산업은 대체효과로 인해 생산량이 증가하는 반면 그 외의 모든 산업은 원유공급 위기가 발생하면 생산량과 생산액 모두 감소하는 것으로 나타난다.
본 연구는 대단층이 발달하는 화산암 분포지역에서 암반 절취사면을 대상으로 단열의 발달특성과 이에 따른 암반분류 수정안을 제시하고자 수행되었다. 부산-울산 고속도로 건설 현장 중 해운대-기장 사이의 일광단층에 가까운 도로 절취사면 노두에서 단열계의 특성이 조사 분석되었다. 단열간격 분포의 경우 신장단열은 대수정규 분포를 보여주고 전단단열은 음의 지수 분포를 보여준다. 단열길이 누적빈도 분포 그림에서 중앙의 직선 구간이 1지점 -1.13, 2지점 -1.01, 3지점 -1.52의 지수를 가지며 멱법칙 스케일링을 지시한다. 각 지점에서 단열의 간격 및 밀도, 단열 간 교차점의 수 등을 분석하여 판단해 볼 때 암반의 안정성 및 강도는 1지점이 가장 낮고 2지점이 가장 높다. 한편, 각 지점에서 서로 연결된 단열의 최대 클러스터로 평가할 때 유체 이동의 능률은 3지점이 가장 높고 1지점이 가장 낮다. 이는 3지점이 상대적으로 단열의 길이가 긴 것들이 많으며 이들이 서로 연결하여 형성하는 최대 클러스터가 높은 비율로 전 지역에 고루 분포하고 있기 때문으로 볼 수 있다. 한편, 현장조사 자료를 토대로 응용통계기법을 이용하여 RMR 분류의 항목별 배점을 조정한 결과에 의하면, 대단층이 발달하는 화산암에서는 기존 RMR 분류 항목별 배점에 비해 현저히 다른 수정된 RMR 배점을 설정함이 타당한 것으로 나타났다. 분석결과 무결암 강도는 18, RQD는 61, 불연속면 간격 2, 불연속면 조건 2, 그리고 지하수 17의 배점이 나타났다.
From the viewpoint of physical distribution, the port transport process can be regarded as a system which consists of various subsystems such as navigational aids, quay handling, transfer, storage, information If management, and co-ordination with inland transport. The handling productivity of this system is determined by the production level of the least productive subsystem. So, a productivity analysis on the flow of cargoes through each subsystem should be made in order to achieve efficient port operation. The purpose of this paper is to analyze the productivity of each subsystem in Pusan port, and to bring forward problems and finally to draw up plans for their betterment. Analyzed results on the productivity of each subsystem are as follows, i) It is known that the number of tugs with low HP should be increased by a few, the number of tugs with medium HP is appropriate, and the number of tugs with high HP is in excess of that necessary. ii ) In the case of container cargoes, it is found that the transfer and storage systems in BCTOC have the lowest handling capability, with a rate of $115\%$, leading to bottle-necks in the port transport system, while the handling rate of the storage and quay handling systems in general piers is in excess of the inherent capability. iii) In the case of the principal seaborne cargoes passing through general piers, there is found to be a remarkable bottle-neck in the storage system. In the light of these findings, both the extension of storage capability and the extension of handling productivity are urgently required to meet the needs of port users. Therefore, iv) As a short-term plan, it is proposed that many measures such as the reduction of free time, the efficient application of ODCY, etc must be brought in and v) In the long-trun, even though the handling capability will accommodate an additional 960,000 TEU in 1991, the scheduled completion date of the third development plan of Pusan port, insufficiency of handling facilities in the container terminal is still expected and concrete countermeasures will ultimately have to be taken for the port's harmonious operation. In particular, the problem of co-ordination with inland transport and urban traffic should be seriously examined together in the establishment of the Pusan port development. As a method of solving this, vi) It is suggested that Pusan port (North port) should be converted into an exclusive container ternimal and overall distribution systems to the other ports for treating general cargoes must be established. vii) And finally, it is also proposed that the arrival time (cut-off time) of influx cargoes for exports such as general merchandise and steel product should be limited, with a view to securing cargoes suitable for the operational capability of BCTOC.
천남성과에 속한 칼라는 생육 조건에 따라 두 종류로 구분이 가능한데 그 중 꽃 모양과 화색이 다양한 유색 칼라는 절화로서 인기가 매우 높다. 그러나 유색 칼라는 자연 번식률이 매우 낮고 개화구근을 얻기 까지 오랜 시간이 소요되어 우량 품종의 대량 번식 체계 확립이 시급하다. 따라서 본 연구에서는 칼라 기내 식물체의 생육을 향상시키고자 다양한 식물 성장 호르몬을 처리하여 실험을 진행하였다. 뿌리 발생은 기본 MS 배지에서 81.5 %로 가장 높았고 신초 및 다신초 발생률은 BA 2.0 mg/L와 IBA 1.0 mg/L 혼용 처리구에서 100.0 %와 36.4 %로 가장 높았다. 또한 생체중에서는 BA 2.0 mg/L 단일 처리구에서 11.2배가 증가하여 모든 처리구중 가장 높은 증가율을 보였다. Auxin과 cytokinin 혼용 처리 실험은 이전 연구에서도 많이 이용되고 있고 칼라 식물 생장에도 긍정적인 효과를 줌으로써 미소대량증식체계 확립에 도움을 줄 것이라고 판단된다.
굴착 전 지반조사 결과를 활용한 지반함몰 위험등급 분류는 시공 과정에서 들어나는 인자들에 따라 평가 결과가 다르게 나타날 수 있다. 본 연구에서는 기존 연구에서 제안된 굴착 전 지반조사 결과를 활용한 지반함몰 위험등급 분류 방법을 현장상황을 고려하여 보정하는 방법을 제시하였다. 굴착 진행 중 지하수위는 차수공법의 적용 여부나 시공 상태에 따라 유출되는 정도가 시공 전 예측결과와 다르게 나타난다. 굴착 중 급격한 지하수위 하강은 압밀이나 압축 등의 체적 감소로 지반함몰을 유발하고 집중 호우 등에 의한 수위 상승은 굴착 저면의 히빙이나 보일링을 발생시켜 지반함몰 위험도를 높인다. 굴착 중 흙막이 벽체의 과도한 변위나 지반침하는 지반함몰의 원인이 될 수 있으며, 매설된 관로의 파손을 야기하여 지반함몰 위험도를 높인다. 본 연구에서는 굴착 중 지하수 변동 및 유출상태, 지반변위, 흙의 종류 등을 고려하여 지반함몰 영향인자를 재평가하는 방법을 제안하였다. 최종적으로 지반함몰 평가의 영향인자를 5개 카테고리의 12개 영향인자로 평가할 수 있도록 개선하였다.
본 연구에서는 수확벌채에 따른 수목의 뿌리 점착력의 변화와 토양의 포화를 가정한 지표유출의 세 가지 흐름 기법(SFD; Single flow direction, MFD; Multiple flow direction, IFD; Infinite flow direction)을 무한사면 안전율 공식에 적용하여 산사태 발생 예측 모델링의 정확성을 분석하였다. 이를 위해 2020년 8월 집중호우의 영향으로 자연사면과 벌채사면에서 다수의 산사태가 발생한 제천지역을 연구지역으로 선정하였다. 위성영상과 25cm급 항공사진을 이용한 산사태 인벤토리 맵핑 결과, 연구지역 내에서 총 830개소의 산사태 발생원이 확인되었다. 산사태 모델링 결과, 벌채에 따른 뿌리 점착력의 변화를 고려한 경우(MFD: 0.81, IFD: 0.80, SFD: 0.80)가 벌채의 영향을 고려하지 않은 경우(MFD: 0.79, IFD: 0.79, SFD: 0.78)에 비하여 AUROC(Area Under the Receiver Operating Characteristics) 분석에서 정확성이 1.3~2.6% 향상되는 것으로 나타났다. 또한, MFD 알고리즘을 이용한 경우는 다른 알고리즘과 비교하여 AUROC 분석에서 정확성이 최대 1.3% 향상되었다. 이러한 결과는 식생조건의 변화를 고려한 뿌리 점착력의 차등 적용과 지표유출수 흐름기법의 선정이 산사태 예측 모델링에 영향을 미칠 수 있음을 시사한다. 향후 이 연구의 결과는 현지 수문모니터링과 함께 수종별 뿌리 점착력의 특징 및 변화를 고려하여 검증되어야 할 것이다.
In this study, the adhesive strength of three commercial polycarboxylate cements to ten types of dental casting alloys, such as gold, palladium, silver, indium, copper, nickel, chromium, and human enamel and dentine were measured and compared with that of a conventional zinc phosphate cement. The $8.0mm{\times}3.0mm$ cylindrical alloy specimens were made by casting. The enamel specimens were prepared from the labial surface of human upper incisor, and the dentine specimens were prepared from the occulusal surface of the human molar respectively. Sound extracted human teeth, which had been kept in a fresh condition since, extraction, were mounted in a wax box with a cold-curing acrylic resin to expose the flattened area. The mounted teeth were then placed in a Specimen Cutter (Technicut) and were cut down under a water spray, and then the flat area on the all specimens were ground by hand with 400 and 600 grit wet silicone carbide paper. Two such specimens were then cemented together face-to-face with freshly mixed cement, and moderate finger pressure was applied to squeeze the cement to a thin and uniform film. All cemented specimens were then kept in a thermostatic humidor cabinet regulated at $23{\pm}2^{\circ}C.$ and more than 95 per cent relative humidity and tested after 24 hours and 1 week. Link chain was attached to each alloy specimen to reduce the rigidity of the jig assembly, and then all the specimens were mounted in the grips of the Instron Universal Testing Machine, and a tensile load was delivered to the adhering surface at a cross head speed of 0.20 mm/min. The loads to which the specimens were subjected were recorded on a chart moving at 0.50 mm/min. The adhesive strength was determined by measuring the load when the specimen separated from the cement block and by dividing the load by the area. The test was performed in a room at $23{\pm}2^{\circ}C.$ and $50{\pm}10$ per cent relative humidity. A minimum of five specimens were tested each material and those which deviated more than 15 per cent from the mean were discarded and new specimens prepared. From the experiments, the following results were obtained. 1) It was found that the adhesive strength of the polycarboxylate cement to all alloys tested was considerably greater than that of the zinc phosphate cement. 2) The adhesive strength of the polycarboxylate cements was superior to the non precious alloys, such as the copper, indium, nickel and chromium alloys, but it was inferior to the precious gold, silver and palladium alloys. 3) Surface treatment of the alloy was found to be an important factor in achieving adhesion. It appears that a polycarboxylate cement will adhere better to a smooth surface than to a rough one. This contrasts with zinc phosphate cements, where a rough helps mechanical interlocking. 4) The adhesion of the polycarboxylate cement with enamel was found superior to its adhesion with dentine.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.