• 패션비즈니스
• /
• 제12권4호
• /
• pp.28-45
• /
• 2008

The purpose of this study is to diagnose actual condition of preference of hair-styling, hair-styling techniques, management, grasping a consumer's consciousness, etc with women living in a city. The survey was gotten to a feminine customer who visited the ten of beauty-shops in shopping center. And statistical data about the actual condition of hair-styling preference realities, hair-styling method and style management was entered into the SPSS statistics analysis system. In brief, be as follows by the results of study. There showed significant difference that noted in hair-style information and basis alternative a beauty salon, there were able to know people whose age is from 20's to 40's got mainly an influence of public media very much and from 40's to 50's got mainly an influence of people around them. Basis alternative of a beauty salon showed significant difference to follow age categories. It appeared that introducing from people around them have a effect on the 20's and 30's, and 40's got an influence of convenience of traffic, and 50's got mainly the shortest distance. In an attitude toward a hair style, especially toward hair cut, a case to do hair cut was most a lot of in own selections, and its result was independent of age categories. The reason that wants to give a chance was most a lot of thinking without an age. Preference length of hair cut showed a significant difference according to age. In permanent section, own selections appeared most regardless of age. And in the permanent motive, also, to have a change appeared most regardless of age. And people had a preference natural to role up to setting regardless of age in permanent wave. In hair color section, women whose age is 20's, 30's, 40's had a motive for a change, on the other hand, 50's and their senior had a motive for a gray hair. Women of all over the age almost knew a fashion color, and they had a preference brown color. In a preference way along a hair color kind, there was a significant difference according to age, also. 20's and 30's did mainly 'semi-permanent coating' and 40's and 50's did mainly 'permanent hair color'. In a attitude about a hair-style management, the more age is young, the more a period is long term. And the more age is old, the more the outlay for price of cut is expensive. But, on the contrary, permanent price showed that the more age is young, the more the outlay for price of permanent is expensive. In hair color, the more age is old, the more a period is short and the more price is low.

• 한국전자파학회논문지
• /
• 제11권2호
• /
• pp.143-150
• /
• 2000

본 논분에서는 시간영역 유한 차분법을 이용하여 마이크로스트립 안테나의 급전홈에 대한 최적 크기를 제시 하였다. 먼저 여러 모양과 형태의 급전홈을 가지는 마이크로스트립 안테나의 반사손실을 주어진 주파수와 기판에 대하여 수치 해석적으로 계산 하였다. 다음으로 주어진 조건에 대하여 반복 계산 과정을 통하여 최적의 급전홈의 크기름 제시하였다. 그 결과 안테나의 너비가 안테나 길이의 0.78배일 경우에 급전홈의 최적 폭은 50Q 급 전선로 폭의 약 0.42배임을 알았고. 급전홈의 최적 길이는 안테나 패치 길이의 약 0.36배 임을 알 수 있었다. 이 결과는 여러 형태의 급전홈을 갖는 마이크로스트립 안테나를 제작하여 측정함으로써 검증되었다. 또한 급전홈의 최적의 크기는 주파수, 안테나 기판의 높이, 유전율에 대하여 영향 받지 않음을 알 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.966-973
• /
• 2008

In recent, the collapses of cut-slope is gradually increased due to the heavy rains accompanied by typhoon. Specially, many cut-slope failures and landslides was happened to Goheung, Yeosu, Suncheon region, Jeonranamdo in the middle of September 2007. The slope of investigation is width 20 m, height 22 m, and the circular failure was occurred. The parent rocks of the slope are pyroclastic rock, namely andesite, andesitic tuff et al. and the weathering grade is completely weathered to residual soils owing to rapid weathering process and has the existence of fault zone and mafic dyke. Also, lots of extension cracks are presented and the hydrologic condition is very deteriorated. As a result of the limit equilibrium analysis, the safety factor is 1.09(in dry season) and 0.64(in wet season). For the stabilization of the cut-slope, we decided to use the retaining wall, anchors and drainage apparatus.

• 한국공작기계학회논문집
• /
• 제10권6호
• /
• pp.57-62
• /
• 2001

Recently, it has increased that the importance of gas pressure weldment of steel bars in large construction bars. But there has hardly been any studies about it. Therefore we need more research. SD40 steel bar (32mm in diameter) which has been practically used at construction sites are tested about tension, bonding, fatigue, a macro structure and micro structure at foil gitudinal section and hardness to fed out the mechanical property and best welding ranges in some cases of mechanical cut and gas cut before gas pressure welded. It is that a gas-pressure welded zone of steel bar where was cleaned of impurities in way of two-upsetted method is more excellent bending and tension property than the regulation of KD D 0244. Also gas cut bars gained hardness from the heat affected zone so. In conclusion, to improve the weldability of steel bars, it is considered best to clean mechanically cut sutra- faces and then weld them by a method of 2 step upset way.

• Geomechanics and Engineering
• /
• 제29권3호
• /
• pp.229-236
• /
• 2022

In this study, a model experiment and field experiment was conducted to introduce the optimal tensile force when constructing a non-open cut tunnel according to the ground conditions of sandy soil. CMR (Concrete Modular Roof) method is economical because of the high precision and excellent durability, and corrosion resistance, and the inserted parts can be used as the main structure of a tunnel. In addition the CMR method has a stable advantage in interconnection because the concrete beam is press-fitted compared to the NTR (New Tubular Roof) method, and the need for quality control can be minimized. The ground conditions were corrected by adjusting the relative density of sandy soil during the construction of non-open cut tunnels, and after introducing various tensile forces, the surface settlement according to excavation was measured, and the optimal tensile force was derived. As a result of the experiment, the amount of settlement according to the relative density was found to be minor. Furthermore, analysis of each tensile force based on loose ground conditions resulted in an average decrease of approximately 22% in maximum settlement when the force was increased by 0.8 kN per segment. Considering these results, it is indicated that more than 2.0 kN tensile force per segment is recommended for settlement of the upper ground.

• 한국유체기계학회 논문집
• /
• 제2권3호
• /
• pp.45-51
• /
• 1999

Centrifugal fans are widely used and the noise generated by these machines causes one of the most serious problems. In general, the centrifugal fan noise is often dominated by tones at BPF(blade passage frequency) and its higher harmonics. This is a consequence of the strong interaction between the flow discharged from the impeller and the cutoff in the casing. However, only a few researches have been carried out on predicting the noise due to the difficulty in obtaining detailed information about the flow field and casing effects on noise radiation. The objective of this study is to develop a prediction method for the unsteady flow field and the acoustic pressure field of a centrifugal fan and to calculate the effects of rotating velocity, flow rate, cut-off distance and the number of blades and its effects on the noise of the fan. We assume that the impeller rotates with a constant angular velocity and the flow field around the impeller is incompressible and inviscid. So, a discrete vortex method (DVM) is used to model the centrifugal fan and to calculate the flow field. The force of each element on the blade is calculated with the unsteady Bernoulli equation. Lowson's method is used to predict the acoustic source. The cut-off distance is the most important factor effecting the noise generation. Acoustic pressure is proportional to 2.8, which shows the same scaling index as the experimental result. In this paper, the cut-off distance is found to be the dominant parameter offecting the acoustic pressure.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.93-100
• /
• 2000

In this study, we used photoelastic coating method which is a kind of model test for examining the stress condition of rock masses around underground structures. Using this method, we could know adaptability and usefulness of photoelastic coating method for various shape of tunnel models. And, in spite of higher cross section efficiency, square shape model showed unstable status because of high stress concentration. So, we cut the slits at the each corner of tunnel, and we could make more stable stress condition by means of moving high stress concentration to rock mass.

• 한국지반공학회논문집
• /
• 제18권2호
• /
• pp.23-37
• /
• 2002

절취 사면에서의 파괴는 사면의 내부 또는 외부 요인들의 결합에 의해 발생한다. 내부 요인은 사면 자체의 지질 또는 형상 조건과 관련된 파괴 요인이며, 외부 요인은 자연적 또는 인위적으로 사면에 가해지는 파괴 요인이다. 각 요인에 의한 사면 파괴에 기치는 영향의 정도는 사면을 구성하는 지반 조건에 따라 다르며, 사면의 거동 특성에 의해 제어된다. 이 연구에서는 사면의 지반 조건을 거동 특성에 따라 구분하는 기준으로 토층심도율(SR), 블록크기비(BR) 및 암석강도를 사용하였다. 이런 기준에 의하면 사면의 지반 조건은 불연속체적 절리 암반과 연속체적 토상 지반, 파쇄 암반, 괴상 암반으로 구분된다. SFi-system은 이와 같이 구분된 지반 조건에 따라 내부 파괴 요인과 외부 파괴 요인을 평가함으로써 사면 파괴 지수(SFi)를 결정하는 평가 시스템이다. 이 평가 시스템을 실제적으로 사면에 적용한 결과, 사면 파괴 지수는 사면 파괴의 가능성 및 규모와 밀접한 관련이 있음을 보여준다. 따라서 SFi-system은 사면의 파괴 예측과 그 특성 분석을 위한 효과적인 도구로 사용될 수 있다.

• 한국환경복원기술학회지
• /
• 제1권1호
• /
• pp.18-27
• /
• 1998

To investigate the restoration progression on soil physical properties and vegetation at the surface of logging road affected by timber harvesting operation. This study was carried out at logging roads constructed from 1989 to 1994 in Mt. Baekwoon, Kwangyang, Chollanam-do. Judging from the analysis of soil hardness, there were significant changes in the depth of soil between 5 and 10cm. Soil hardness was recovered from the compacted condition to the natural forest condition after 9 years passed. Soil macroporous ratio (pF2.7) of topsoil was higher than that of deep soil. Soil moisture retention of topsoil was more improved than that of deep soil. From the view of soil bulk density, the necessary time for recovering to the undisturbed condition of forest soil was about 10 years in the logging road left. Soil physical properties such as soil bulk density and porous ratio were recovered as time passed. Improved soil physical properties promoted the plant recovery on the logging road surface. The dominant species on the logging roads were Comus kousa, Prunus sargentii as overstory species, Rubus crataegifolius, Lespedeza bicolor as understory species, and Saussurea gracilis, Pteridium aquilinum var. latiusculum as herbaceous species. The plant recovery of bank-slopes was faster than that of cut-slopes and road surface. In progress of year, average plant coverage were 70 to 90% in cut- and bank-slopes and 30 to 60% on the logging road, surface which was elapsed 9 years after logging road construction. Therefore, additional planting and seeding work could be effective to the soil condition and vegetation restoration.

• 한국초지조사료학회지
• /
• 제17권2호
• /
• pp.187-198
• /
• 1997

This experiment was conducted to evaluate effects of wilting and additives on fermetation characteristics, quality and aerobic stability of silage of rye(Seca1e cereale L.) harvested at the early heading stage. Harvested rye was wilted or mixed with beet pulp and then treated with formic acid or lactic acid bacteria(LAB) inoculant. Treatments were consisted of direct cut(DC), wilted(WT), beet pulp added(BP), direct cut and formate applied(DF), wilted and formate applied(WF), beet pulp and formate applied(BF), direct cut and LAB inoculated(DL), beet pulp added and LAB inoculated(BL), and wilted and LAB inoculated(WL) silages. Afler 70 days of ensiling period, the silages were opened and exposed to air for 7 days, and the silages of opening day(0 day) were compared with the silages exposed to air for 7 days(7 day). 1. LAB inoculated rye silages(DL, WL, BL) lowered pH values effectively eom the third day of ensiling and showed most stable pattern of pH changes during the initial fermentation process. Direct cut and formate applied(DF), beet pulp and formate applied(BF) and beet pulp added(BP) silages were also effective in lowering pH from the seventh day thai direct cut treatment(DC). 2. pH was low below 3.7 in all treatments of 0 day. After 7-day period of aerobic exposure, DL and WL showed considerable increases in pH from 3.5 and 3.4 to 8.3 and 6.4, respectively. 3. Direct cut rye silages(DF, DC, DL) and beet pulp and formate treatment(BF) produced effluent of 121.2, 85.9, 80.3 and 34.2 mlkg, respectively and these were greater than others(P<0.01). Beet pulp retained 1.61 I/kg of effluent at the application rate of 50 kg/t in comparing BP with DC, and formate application increased the amount of effluent in comparing DF and BF with DC and BP, respectively(P<0.01). 4. Beet pulp and LAB treatment(B1) was highest in content of lactate as 3.1% and formate treated silages(DF, WF, BF) showed lower content of lactate and total acid than others. LAB inoculated(D1, WL, BL) and wilted (WT) silages were graded to be good quality as a second group by the Flieg's score. Formate applied silages (DF, WF, BF) were graded as a foum group lower than DC by one. 5. Residual content of WSC of rye silage was higher in BP, BF, DL and BL than direct cut treatment(M3) (P< 0.01). Formate application had a tendency to increase the content of residual content of WSC. 6. For the ratio of NH3-N to Total N, wilted and LAB inoculated(W1) and direct cut and LAB inoculated(D1) silages were lowest on 0 day as 8.9 and 9.3% respectively. But after 7-day period of aerobic exposure, WL and DL showed largest increase of the ratio of $NH_3-N$ to Total N from 0 day(P<0.01). 7. On 0 day wilted(WT), beet pulp and formate treatment(BF), and beet pulp and LAB treatment(B1) were lower than direct cut treatment(DC) for NDF and ADF concentrations consistently. Formate applied silages (DF, WF, BF) made little change in ADF and NDF concentrations during 7 day period of aerobic exposure. DL and WL showed a large increase in ADF and NDF concentrations under aerobic condition(P<0.01). 8. IVDMD values of wilted(WT), beet pulp added(BP), wilted and LAB inoculated(W1) and beet pulp added and LAB inoculated(B1) silages were higher than direct-cut treatmentPC) as 84.7, 84.7, 84.4 and 83.0%, respectively on 0 day. But during 7-day period of aerobic exposure, a great decreae in IVDMD of WL was showed(P<0.01). The experimental results indicate that wilted silage(WT) could be recommended as the most effective treatment for reducing efluent and increasing quality and feed value of rye silage without deteriorating aerobic stability more than direct cut treatment(DC). Additionally, under unfavorable weather condition beet pulp added and LAB inoculated treatment(T3L) might be the possible alternative for successful ensiling of forage rye.