• 한국지형학회지
• /
• 제20권4호
• /
• pp.1-13
• /
• 2013

파도리 해빈은 우리나라의 대표적인 혼합해빈으로써 태안해안국립공원에 속하며 다양한 미지형 경관의 변화가 나타나는 해빈이다. 본 연구의 목적은 소산형 저조간석지와 반사형 비치페이스로 이루어진 5~7m의 대조차 혼합해빈인 파도리 해빈의 퇴적물 분포 특성을 미지형과의 관계를 통해 이동 매커니즘을 밝히고 파랑조건과 조석조건에 따른 미지형 경관변화의 양상을 파악하는 것이다. 연구 결과 첫째, 남부에서 북부로 갈수록 퇴적물 입도가 작아지는 경향성을 보였으며 해빈 남부에 넓게 펼쳐진 파식대가 해식애와 함께 주요한 퇴적물의 기원임을 알 수 있다. 파도리 해빈의 비치페이스와 범의 퇴적물 분포와 해빈을 가로지르는 방향과 연안 방향으로 일정한 입도 분포의 경향성을 보이는 것에 대해서는 선별운반작용으로 설명할 수 있다. 둘째, 혼합해빈의 미지형 경관변화의 주요한 원인에는 파랑과 조석이 있으며, 저파랑 환경에서 범이 발달하고 상부비치페이스에 비치 커습이 나타나는 반면 고파랑 환경에서 범의 규모가 작아지고 상부 비치페이스의 퇴적물은 혼합되는 경향을 보인다.

• 한국전산유체공학회지
• /
• 제13권4호
• /
• pp.72-79
• /
• 2008

This study is to investigate the air flow around a sirocco fan which is used in a range hood. The main object of the study is to improve the flow rate of the fan by analysis of unsteady 3-dimensional incompressible flow. Overall analysis is carried out using CFD method. For this, we used a commercial code, SC/Tetra, and used a sliding mesh method to give the same condition as an actual state. First, verification of the CFD results is done by comparing the experimental data with the numerical data for the suction flow rate. It is confirmed that two results are well consistent. Then for the improvent of flow rate, the effect of shape factors such as diameter ratio of fan, geometry of case, cut-off aperture and guide angle of case exit on the suction flow rate was considered. Especially, for a new design of housing, the principle of Archimedes spiral was used. The overall analysis was applied to a new design of housing, and the result showed an increase of flow rate by 10.7%.

• 한국생산제조학회지
• /
• 제8권4호
• /
• pp.52-60
• /
• 1999

In this study the effect of roundness error with respect to the cutting conditions using the external cylindrical work piece by end mill cutting in a machining center was studied. the end mill used in this study is HSS coated with Ti-N which is of Ø 12-4 flutes. The material of workpiece is SM20C and cutting oil is used as a cooling flued The cutting experiments were carried out for the several cutting conditions(depth of cut height of end mill feed rate revolution per minute and cutting direction) and their roundness effects were compared using the least squares circle measuring method. The experimental results are summarized as follows : 1) The cutting depth is dominant for the roundness of a cylindrical work piece and the cutting speed must be determined precisely when the cutting depth is large 2) When the cutting direction in circular manufacturing is the same with the spindle rotation i.e up-cutting condition the surface roundness is also improved.

• Journal of Plant Biotechnology
• /
• 제35권3호
• /
• pp.223-228
• /
• 2008

This study was conducted to investigate an optimal condition for shoot proliferation and regenerate shoots from in vitro leaflet and embryogenic calli from in vitro roots in rose. The effect of BAP on shoot proliferation was somewhat different depending upon genotypes or gelling agents. Leaflets with petiole cut from donor shoots which had been cultured in MS medium supplemented with 0.1 $mg{\cdot}L^{-1}$ NAA for six weeks was effective for regeneration of adventitious buds(ABs) as well as shoot elongation of Rosa hybrida cv. Sweet Pink. Culturing seven leaflet explants per petri plate($100mm{\times}15mm$) was effective for regeneration of ABs. Embryogenesis was shown in the calli induced from roots of Rosa hybrida cv. Sweet Pink cultured in the SH medium supplemented with 11 $mg{\cdot}L^{-1}$ 2, 4-D for four weeks. Color of calli induced from roots was yellow although their color was a little different as type of basal medium.

• 한국지반환경공학회 논문집
• /
• 제5권4호
• /
• pp.73-79
• /
• 2004

도로주변 절토사면 상부에 설치되는 산마루측구는 강우시 상부로부터 흘러내려오는 지표수를 원활히 배수시켜, 절토면으로 유입되는 것을 방지하기 위해 설치한다. 그러나, 산마루측구 설치시 시공여건상 품질관리가 어려워, 절토면 배면으로부터의 지표수를 원활히 배수시키지 못하는 문제점을 안고 있다. 따라서, 본 논문에서는 비탈면 상부에 설치된 산마루측구의 기능을 지반 및 지형조건, 강우조건에 따라 비탈면 안정성에 미치는 영향을 평가함으로써, 현재 설계 시공되고 있는 산마루측구의 설치 적정성을 평가하였다. 평가결과 산마루측구는 평균적으로 강우시 약 3%의 안전율 증대효과가 있는 것으로 검토되었다.

• 한국지반공학회논문집
• /
• 제18권4호
• /
• pp.239-248
• /
• 2002

안정액(bentonite slurry)을 이용한 지하연속벽의 건설은 굴착된 trench 내에서 안정액이 침투케익과 표면케익을 포함한 불투수막을 형성함으로서 trench 의 안정성을 유지할 수가 있다. 그러므로 구조용 지하연속벽 건설이나 폐기물 매립장의 차수용 연속벽 건설시 지반조건 및 주변여건의 변화에 의하여 여러 가지 문제가 발생 될 수 있다. 본 논문은 안정액 유출과 불투수케익 형성과정을 대형실험으로 모델링하여 그 결과가 slurry trench 안정성에 미치는 영향을 평가하고, 현장조건에 적합한 설계절차를 제시하였다.

• 한국정밀공학회지
• /
• 제23권3호
• /
• pp.47-55
• /
• 2006

Laser welding of dissimilar metals has been widely used to improve a wear resistance and a corrosion resistance of the industrial parts. The objective of this research is to investigate the influence of the process parameters, such as the welding for SM45C and STS304 with CW Nd:YAG lasers. The bead-on-plate welding tests are carried out for several combinations of the experimental conditions. In order to quantitatively examine the characteristics of the dissimilar welding, the welding quality of the cut section, stress-strain behavior and the hardness of the welded metal are investigated. From the results of the investigation, it has been shown that the optimal voiding condition without defects in the vicinity of the welded area and with a good welding quality is 1600W of the laser power, 0.85m/min of welding speed and $4{\ell}/min$ of pressure for shielding gas.

• 토지주택연구
• /
• 제8권1호
• /
• pp.13-22
• /
• 2017

In this study, triggering mechanism of ground sinking was analyzed through groundwater flow analysis on the basis of a case of the ground sinking occurred in Yongsan in 2015. The results of geotechnical investigation performed before and after the ground sinking were analyzed for the accurate understanding of geological features in the study area. The numerical groundwater flow analysis was performed to evaluate the influence of the flow behavior from the surrounding area toward the excavated site using software of Visual MODFLOW. As a result, it was found from the geotechnical analysis that the strata of sedimentary layer along the sunken area in the vertical direction was mixed significantly after the ground sinking compared with the status of the soil condition before the ground sinking. Piping was occurred at the toe of cut-off wall in the sandy gravel layer, and this phenomenon was predicted by the numerical flow analysis. Sequential ground displacement scenario of the ground sinking was derived from the geotechnical in situ test and numerical flow analysis performed in this study.

• 한국정밀공학회지
• /
• 제20권1호
• /
• pp.205-213
• /
• 2003

The fiber reinforced composite material is widely used in the multi-industrial field where the weight reduction of the infrastructure is demanded because of their high specific modulus and specific strength. It has two main merits which are to cut down energy by reducing weight and to prevent explosive damage preceding to the sudden bursting which is generated by the pressure leakage condition. Therefore, Pressure vessels using this composite material in comparison with conventional metal vessels can be applied in the field such as defense industry, aerospace industry and rocket motor case where lightweight and the high pressure are demanded. In this paper, for nonlinear finite element analysis of E-glass/epoxy filament winding composite pressure vessel receiving an internal pressure, the standard interpretation model is developed by using the ANSYS, general commercial software, which is verified as the accuracy and useful characteristic of the solution based on Auto LISP and ANSYS APDL. Both the preprocessor for doing exclusive analysis of filament winding composite pressure vessel and postprocessor that simplifies result of analysis have been developed to help the design engineers.

• Journal of Microbiology and Biotechnology
• /
• 제12권3호
• /
• pp.377-381
• /
• 2002

Recently, interests to remove nitrogen in the nitritation process have increased because of its economical advantages, since it could be a short-cut process to save both oxygen for nitrification and carbon for denitrification compared to a typical nitrification. However, the kinetics related with the nitritation process has not yet been fully understood. Furthermore, many useful models which have been successfully used for wastewater treatment processes cannot be used to estimate effluent nitrite concentration for evaluating performance of the nitritation process, since the process rate equations and population of microorganisms for nitrogen removal in these models have been set up only for the condition of full nitrification. Therefore, the present study was conducted to estimate an effluent nitrite concentration in the nitritation process with a concept of enzymatic inhibition kinetics based on long-term laboratory experiments. Using a nonlinear least squares regression method, kinetic parameters were accurately determined. By setting up a process rate equation along with a mass balance equation of the nitrite-oxidizing step, an effluent nitrite concentration in the nitritation process was then successfully estimated.