• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.870-877
• /
• 2005

This study examined a case of collapse and reinforcement of the colluvial deposit slope in Kyeongnam Geoje Area. The reason for the collapse was found first in the reduction of the resistant force due to slope-cut for constructing retaining walls. This decreased the resistant force against sliding, which enabled precipitation during the rainy period to seep into the ground in the upper colluvium, resulting in increase in porewater pressure. This leads to decreased shear strength and increased sliding force, which ultimately caused the collapse of the slope. For the long-term stability, methods attained for stability reinforcement are summarized in the following table.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.614-621
• /
• 2004

Blasting is a technique for rock excavation: For instance, a rock cutting in a mountain side to prepare a base for a road. The blasting damage affect the rock slope stability. Therefore control blasting must be used. In this study, cutting cases of Sixty-nine rock blasts were investigated. Blasting damage patterns in rock slope and reinforcement methods are studied.

• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.71-80
• /
• 2004

The failure of cut slopes frequently occurs particularly during the thawing season and the rain season in summer. This study interpreted data collected from site to which a real-monitoring system was applied in order to analyze the causes of ground behaviors and to forecast future slope failure. As for research methods, this study analyzed the size and mechanism of failure by integrating the results of field surveys and measurements. Furthermore, it analyzed data transmitted by the monitoring system installed in the a result, three times of ground displacement occurred as well as a number of partial tension cracks. The cut slope composed of sandstone and siltstone started its initial behavior as a result of torrential downpour and the loss of support of the substructure. For quantitative analysis of the characteristics of ground behavior, this study measured 5 lateral lines. According to the result of the measurement, displacement happened little in the section to which countermeasure had been applied, but displacement of maximum 400mm happened in the section to which countermeasure had not bee applied. The analysis of data on displacement and rainfall suggested a close relationship between ground behavior and rainfall. According to the result of stability interpretation along with the change of ground saturation, stability rate appeared to be less than 1.0 when ground saturation is over 55%. Although the current trend of ground behavior is at a stable stage falling within the range of tolerance, it is considered necessary to continue monitoring and data analysis because ground displacement is highly possible with the change of temperature during the winter.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.1
• /
• pp.12-20
• /
• 1998

This study was carried out from June 1996 to November 1997 to analyze the growth characteristics of the introduced species revegetated on highway cut-slopes. The number of revegetation measures type surveyed were fourteen such as seed-spraying measures, block-sod pitching measures, and hydro-seeding measures with seed-fertilizer-soil materials. The introduced species for revegetation measures were mostly Festuca arundinancea(cool season grass), Eragrostic curvula(warm season grass), Lolium perenne(cool season grass), Dactylis glomerata(cool season grass), Poa pratensia(cool season grass). The species diversity index of the upper part on highway cut-slopes were greater than that of the middle part and lower part. The growth of introduced species was good on north-facing cut-slope than the others and that was flourish in temperate north forest zone. Also, the introduced species seemed to decrease or disappear, while the ratio of native woody and herb species which were in mature stage seemed to increase.

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.459-470
• /
• 2008

Types of slope failure related to cut slope stability are interpreted through case analyses, and also factors affecting structurally controlled instability investigated, which are developed by geologic structures along a national road No. 25 across the Cheongwon and Boeun-Guns, Chungbuk. Engineering properties such as orientation, persistence, roughness and uniaxial compressive strength of joints are analyzed by square-inventory method in three areas with well-preserved outcrops. The study area is located in Ogcheon folded bet, and are composed of quartz-schist and quartzite in the Midongsan Formation and phyllite in the Ungyori Formation. Flexural beds by folding, schistosity and cleavage besides joints are developed due to slight metamorphism. Various types of joints developed by folding are formed such as strike-parallel, strike-perpendicular, wedge and wrench joint sets by both initially regional and later superposed folding. Factors of slope instability are created by crossing the orientations of joint, cleavage, bedding and slope one another. In the case that the orientation of a slope is coincident with one of beds, factors causing large-scale failure including plane failure are increased greatly. Also in the region that orientations of the slope and bed are crossed each other at high angle, only local and minor failures are shown in the slope.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.6
• /
• pp.72-85
• /
• 2003

The purpose of this study is to establish the basis of the ecological restoration on the limestone mines in Korea, through the research of the revegetation measures of the disturbed slopes in Japanese limestone mines and the analysis of the case of Ibuki and Bukou limestone mines to realize the restoration works successfully. According to the number of mines to carry out the revegetation works increase every year, the revegetation area and amount of planting also go on increasing in Japan. In the small mines the environmental problem is not recognized seriously, but some mines have muchly invested in the revegetation of the damaged land by mines. Ibuki mine in Shiga-gen is practicing the four principles for the restoring of the revegetation in the disturbed slopes by mines. Firstly, the mean slope preserves $37^{\circ}$ in the last rock cut slopes. Secondly, the last rock cut slopes to rehabilitate are covered with the soil dressing 30cm high. Thirdly, the grasses in the mining area are digged up beforehand, and then they are reused to the revegetation works of rock cut slopes. Lastly, from the upper rock cut slopes the revegetation works begin, the process of the above are repeated, as the result, the restoring works will be completed. Upon the ground of these principles, the complex of the original vegetation and the native species seeding, that is, the revegetation technique of Ibuki have established. In the difficult area to revegetate, sodding works, heaping up vegetation-sack, seed-spraying, heaping up soil-sacks and planting works are adapted variously. Bukou mine in Saitama-gen try to maintain the revegetation, the screening and the stability of the enormous mining rock cut slope, and for these works, the activity of 'Chichibu Working Group of Rock Wall for Limestone Mines' contributes largely. The chief technique of the revegetation in Bukou mine is following; after the making the berm on the rock cut slopes, the soil dressing is filled in it, and the trees is planted for the screening of the rock cut slopes. They devide the rock cut slopes into four typical types, and choose the different ways to make the berm and fill the soil dressing in characteristic. Most of the planting trees are consist ofthe native species of Mt. Bukou through the stages of the nursery and transplantation. Not only the revegetation of the demaged land but also the breeding of the conservational plants also are their important business.

• Journal of the Korea Furniture Society
• /
• v.10 no.1
• /
• pp.65-71
• /
• 1999

The bending performance of sloped finger-jointed Rhus verniciflua were tested in order to improve the strength properties of finger-joint. Sloped finger-cut pieces were jointed with three kinds of adhesives (polyvinyl acetate, polyvinyl-acryl acetate and oilic resin). The slope ratios of finger joints were 0, 1.0, 1.5, and 2.0. The MOE, MOR and deflection to maximum load in bending of sloped finger-joints and solid wood specimen were measured. The results were : 1) The efficiencies of MOE to finger and sloped finger-joints to the solid wood were almost same in the three kinds of adhesives(polyvinyl acetate, polyvinyl-acryl acetate and oilic urethane resin) and there were some effect of slope on the MOE in a sloped finger-joint for three kinds of resin adhesives. 2) There was the effect of slope on the MOR in sloped finger-joints in every kind of adhesive. The efficiencies of MOR in slope ratios of 0 and 2.0 ranged 65-79%, respectively. There was also a slight effect of the kinds of adhesives on the MOR. However, the efficiencies of deflection to the urethane resin adhesive were much less than those of polyvinyl acetate, polyvinyl-acryl acetate resin adhesives except the slope ratio of 0. 3) It might be impossible to estimate the bending stregth of sloped finger-jointed Rhus verniciflua by using MOE. The correlation coefficient(0.192) between MOE was very low and not significant at 5% level.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.2
• /
• pp.12-20
• /
• 2004

This study was carried out from January 1998 to December 1999 to report the revegetation of cutting-rock slopes and a design standard in the highway cut-slopes. The field data was collected from the 67 sites cutting-rock slopes of highways, local roads, and field test. As the result of analyze, cutting-rock slopes revegetation measures were 16 types. There were Vine planting(3 types), Hydroseeding measures with seed-fertilizer-soil materials(5 types), Vegetaion-base spraying measures(5 types), and Stability measures(3 types). The factors affecting the plant coverage rates of cutting-rock slopes were the slope gradient, the slope width and direction. The plant coverage rate decreases in the condition of steep slope and long slope width and length(height). In addition, the plant coverage rates of the westward and southward were lower than that of the northward and eastward. Most dominant species were Zoysia japonica, Lespedeza cyrtobotrya, Lespedeza cuneata, Rubus crataegifolius, Miscanthus sinensis, Arrundinella hirta, Themeda triandra, and Oenothera odorata. Exotic species were Eragrostis curvula(Weeping lovegrass), Dactylis glomerata Orchardgrass), Lolium perenne(Perennial ryegrass), and Festuca arundinacea(Tall fescue). It is recommended to adjust the proposed factor as environment, topsoil, classification of rock, field condition and characteristic related with revegetation measures on slopes for the presentation of revegetation standard.

• Korean Journal of Environment and Ecology
• /
• v.17 no.4
• /
• pp.337-345
• /
• 2004

The objective of this study was to monitor vegetation recovery process after timber harvesting at (Mt.) Baekwoonsan Seoul National University Forests, Korea. Two monitoring plots were established in 1994 and woody plant were monitored in 1997, 1999, 2001, and 2003. Vegetation development pattern during last ten years (1994-2003) after timber harvesting were as follows; Styrax obassia, Styrax japonica and Lindera erythrocarpa as of the existing tree were competitive species in the first year after clear-cut, Styrax japonica and Lindera erythrocarpa as of sprout tree and Aralia elata as of seedling were dominant species in the sixth year after clear-cut, and Lindera erythrocarpa, Styrax japonica and Quercus serrata were dominant species from the eighth year to the tenth year after clear-cut. Species diversity index of harvested forest interior was decreased at the southwestern slope while it was increased in the northeastern slope till 6th year and decreased after the 8th year). According to DBH distribution pattern, No. of individuals of Quercus serrata, Styrax japonica and Lindera erythrocarpa showed high frequency in the southwestern slope, and Acer pseudosieboldianum, Styrax obassia, Magnolia sieboldii, Lindera erythrocarpa, and Aralia elata showed good growth in the northeastern slope. There was a difference between slopes in Basal area. It was decreased at the southwestern slopes during the 10th year continuously and it was increased the sixth year however, was decreased after the eighth year at the northeastern slope.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.5
• /
• pp.65-78
• /
• 2008

In case of cut-slopes or shallow-depth tunnels, sliding along with discontinuities or rotation could play a critical role in judging stability. Although numerical analysis is widely used to check the stability of these cut-slopes and shallow-depth tunnels in early design process, common analysis programs are based on continuum model. Performing continuum model analysis regarding discontinuities is possible by reducing overall strength of jointed rock mass. It is also possible by applying ubiquitous joint model to Mohr-Coulomb failure criteria. In numerical analysis of cut-slope, main geotechnical properties such as cohesion, friction angle and elastic modulus can be evaluated by empirical equations. This study tried to compare two main systems, RMR and GSI system by applying them to in-situ hazardous cut-slopes. In addition, this study applied ubiquitous joint model to simulation model with inputs derived by RMR and GSI system to compare with displacements obtained by in-situ monitoring. To sum up, numerical analysis mixed with GSI inputs and ubiquitous joint model proved to provide most reliable results which were similar to actual displacements and their patterns.