• Journal of the Korean Society of Physical Medicine
• /
• v.10 no.4
• /
• pp.39-48
• /
• 2015

PURPOSE: This study aimed to compare the degree of lumbopelvic rotation during the active straight leg raise (ASLR) test in chronic low back pain with and without lumbar segmental instability. METHODS: A total of 71 patients with chronic low back pain were recruited for this study. The subjects who tested positive for more than three of the five lumbar segmental instability tests (prone lumbar instability, lumbar passive extension test, anterior posterior mobility test, passive straight leg raise, age) were categorized into the lumbar segmental instability positive group. Patients who tested positive for less than three of the five tests were categorized into the lumbar segmental instability negative group. The lumbopelvic rotation was measured three times during ASLR and a mean was determined. Subjective heaviness during the ASLR was measured on 6 point scale. RESULTS: There was a statistically significant difference in the lumbopelvic rotation angle between the groups with and without lumbar segmental instability (p<.01). There was no significant difference in the subjective heaviness during ASLR. The mean lumbopelvic rotation angle during ASLR was $13.54{\pm}2.86^{\circ}$, and $8.81{\pm}2.47^{\circ}$ in the positive and negative groups, respectively (p<.01). The cut-off value of the lumbopelvic rotation during was $10.5^{\circ}$, the sensitivity was 82.9%, and the specificity was 80.6%. CONCLUSION: These results suggest that lumbopelvic rotation is more prevalent in patients without lumbar segmental instability. Clinically, this important when diagnosing chronic low back pain with lumbar segmental instability, as the lumbopelvic rotation angle during the ASLR test can be used to aid in diagnosis.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.103-105
• /
• 2008

In grid-interconnection system, a fast, robust and precise phase angle detector is most important to grid synchronization and the active power control. The phase angle can be easily estimated by synchronous dq PLL system. On the other hand under unbalanced voltage condition, synchronous dq PLL system has problem that harmonics occur to phase angle or magnitude of grid voltage because of the effect of the negative sequence components. So, To eliminate the negative sequence components, the PLL method using APF (All Pass Filter) in a stationery reference frame to extract positive sequence components under unbalanced voltage condition is researched. In this paper, we propose a new PLL method with decoupling network using APF in a synchronous reference frame to extract the positive sequence components of the grid voltage under unbalanced grid. The cut-off frequency of APF in a synchronous reference frame can be set to twice of the fundamental frequency comparing with that of APF in a stationery reference frame which is the fundamental frequency. The proposed PLL strategy can detect the phase angle quickly and accurately under unbalanced gird voltages. Simulation and experimental results are presented to verify the proposed strategy under different kind of voltage dips.

• The Journal of the Korean dental association
• /
• v.56 no.3
• /
• pp.134-141
• /
• 2018

Purpose: To measure the head tilting angle creating initial condylar cut-off and to find the head position inducing the superimposition of the cervical vertebrae over the mandibular ramus on panoramic radiograph. Materials and Methods: The panoramic radiographs were taken with Didactic skull on cervical spine model (Scientific GmbH, Hamburg, Germany) using Kodak 8000c Digital Panoramic radiography. For the inherent radiolucency of the plastic skull model, radiopaque 1 mm diameter lead wires were attached along the margin of the mandibular condyle, ramus, mandibular body, cervical vertebrae, and FH plane of the skull model. For measuring the head tilting angle creating the condylar head cutoff, panoramic radiographs were taken by tilting the FH plane downward in 5 degree increments. For finding the distance between transverse process of the third cervical vertebra and gonion inducing superimposition of cervical vertebrae on the mandibular ramus, panoramic radiographs were taken by decreasing the distance in 0.5 cm increments. Result and Conclusion: The condylar cutoff began to appear when the head of skull model was tilted downward by 15o. As the head tilting angle increasing, the condylar cutoff became more prominent. The superimposition of cervical vertebrae over the mandibular ramus began to appear when the distance between the gonion and third cervical vertebra was 1.0 cm. As the distance decreasing, the superimpostion became more prominent.

• Journal of computational fluids engineering
• /
• v.13 no.4
• /
• pp.72-79
• /
• 2008

This study is to investigate the air flow around a sirocco fan which is used in a range hood. The main object of the study is to improve the flow rate of the fan by analysis of unsteady 3-dimensional incompressible flow. Overall analysis is carried out using CFD method. For this, we used a commercial code, SC/Tetra, and used a sliding mesh method to give the same condition as an actual state. First, verification of the CFD results is done by comparing the experimental data with the numerical data for the suction flow rate. It is confirmed that two results are well consistent. Then for the improvent of flow rate, the effect of shape factors such as diameter ratio of fan, geometry of case, cut-off aperture and guide angle of case exit on the suction flow rate was considered. Especially, for a new design of housing, the principle of Archimedes spiral was used. The overall analysis was applied to a new design of housing, and the result showed an increase of flow rate by 10.7%.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.2
• /
• pp.134-141
• /
• 2009

The new method is proposed to improve the dynamics of the phase angle detector during abrupt voltage dip caused by a grid fault. Usually, LPF(low pass filter) is used in the feedback loop of SRF(Synchronous Reference Frame) - PLL (Phase Locked Loop) system because the measured grid voltage contains harmonic distortions and sensor noises. A better transient response can be obtained with the proposed design method for SRF-PLL by the analysis of linearized model of the PLL system including LPF. Furthermore, in the proposed method, the controller gain and LPF cut-off frequency are changed from normal value to transient value when the voltage disturbance is detected. This paper shows the feasibility and the usefulness of the proposed methods through the computer simulation and the experiment.

• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.1
• /
• pp.35-39
• /
• 2017

We used a construction method using a CNC milling machine, where free-formed molds were made by cutting EPS (Expanded PolyStyrene) foam with the CNC machine, to build free-formed buildings. CNC milling is off-the-shelf technology that can easily cut EPS foam; however its production cost is too high and the time to manufacture an EPS mold is too long. This paper proposes a novel cutting machine with a fast and cost effective mechanism to manufacture EPS concrete molds. Our machine comprises a cutter and Cartesian coordinate type moving mechanism, where the cutter cuts EPS foam using a hotwire in the shape of '$\sqcap$' and is capable of adjusting its cutting angle in real-time while keeping its cutting width. We proved through cutting experiments on the CNC machine that cutting time was greatly shortened compared to the conventional method and that the resulting concrete mold satisfied manufacturing precision.

• Preventive Nutrition and Food Science
• /
• v.5 no.4
• /
• pp.197-199
• /
• 2000

Clarified fruit and vegetable juices (apple, carrot and tangerine) were produced using ultrafiltration and their color change due to the mixing ratio were evaluated. clarification was carried out by passing he supernatant of extracted juice through a filter and also by using a membrane of molecular weight cut-off 10,000 Daltons to obtain the juice ultrafiltrates. The mixing ratio between apple and carrot juices was kept constant at 1:1 while increasing the amount of tangerine juice according to 10, 20, 30, 40 and 50% an stored at 4$^{\circ}C$ prior to the color measurement. Hue angle ({TEX}$h_{ab}${/TEX}) and {TEX}$L^{*}${/TEX}-value increased as the tangerine mixing ratio increased. The color difference indicated by ΔE-value also increased as the amount of tangerine increased indicating that the color of the mixed juice became pale and the changes were slight but distinctive. On the other hand, chroma ({TEX}$C^{*}${/TEX}), {TEX}$La{*}${/TEX}- and {TEX}$b^{*}${/TEX}-values decreased as the tangerine mixing ratio increased indicating that the color of the mixed juice became slightly more grayish and the samples were becoming les yellow. A simple mathematical model to predict each color characteristic is proposed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.361-361
• /
• 2012

사파이어 단결정은 LED 소자의 기판으로 널리 사용되고 있으며 현재 소자 수율을 향상시키기 위하여 6인치 이상의 대구경 웨이퍼를 만들기 위한 많은 노력을 경주하고 있다. 단결정, 특히 반도체 단결정 웨이퍼에서 ($00{\cdot}1$), ($10{\cdot}2$) 등의 어떠한 결정학적인 방위(crystallographic orientation)가 표면과 이루는 각도, 즉 표면방위각(off-cut 또는 misorientation angle)의 크기와 방향은 제조된 LED 소자의 물성에 영향을 끼치므로 웨이퍼를 가공할 때 정확하게 콘트롤해야 한다. 본 연구에서는 고분해능 X-선을 이용하여 표면이결정학적 방향과 이루는 면방위각을 정밀하게 결정하는 측정법을 연구하였다. 기존의 ASTM 의 측정법과는 다른 원리를 이용하고 웨이퍼의 휨(bending)이나 측정고니오 회전축의 편심과 무관하게 표면방위각을 결정하는 새로운 이론적 모델을 제시하고 그 모델을 적용하여 표면의 수직축이 대구경 사파이어 ($00{\cdot}1$) 축과 이루는 표면방위각을 정확하게 측정 분석하였다. 본 연구에서 사용한 6인치 사파이어 웨이퍼에 대하여 표면방위각은 $0.21^{\circ}$이었으며 표면각이 나타나는 방향은 웨이퍼의 primary edge 방향으로부터 $-1.2^{\circ}$ 벗어나 있는 방향이었다.

• Journal of the Optical Society of Korea
• /
• v.19 no.5
• /
• pp.487-493
• /
• 2015

A wavefront coding (WFC) technique provides an extension of the depth of field for a microscopy imaging system with slight loss of image spatial resolution. Through the analysis of the relationship between the incidence angle of light at the phase mask and the system pupil function, a mixing symmetrical cubic phase mask (CPM) applied to 5X-40X micro-objectives is optimized simultaneously based on point-spread function (PSF) invariance and nonzero mean values of the modulation transfer function (MTF) near the spatial cut-off frequency. Optimization results of the CPM show that the depth of field of these micro-objectives is extended 3-10 times respectively while keeping their resolution. Further imaging simulations also prove its ability in enhancing the defocus imaging.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.6
• /
• pp.135-140
• /
• 2021

In this paper is a study on system design to prevent accidents using accelerometers. A switching power FET was configured at the power supply stage, and DC-DC converter, a regulator, and an LDO were designed for the power supply. In order to solve the power problem at once, it was divided into two parts, and a 3-axis accelerometer was designed to extract motion information to safely prevent accidents. Microprocessor enables communication through I2C and UART communication ports, and enables debugging through J-LINK. As a result of measuring the acceleration sensor data, it was confirmed that the power is normally cut off to prevent accidents when motion at an angle of 30° or more is detected.