• 한국인터넷방송통신학회논문지
• /
• 제21권6호
• /
• pp.135-140
• /
• 2021

본 논문은 3축 가속도센서를 이용한 사고를 방지하기위한 시스템 설계에 관한 연구이다. 전원 공급단에 스위칭 파워 FET를 구성하였고, 전원 공급장치는 DC-DC, 레귤레이터, LDO를 설계하였다. 전원 문제를 한번에 해결하기 위해 2원화를 하였으며, 3축 가속도 센서를 설계하여 움직임 정보를 추출하여 안전하게 사고를 예방할 수 있도록 설계하였다. 마이크로프로세서는 I2C, UART 통신 포트를 통해 통신할 수 있도록 하였으며, J-LINK를 통해 디버깅 할 수 있도록 하였다. 가속도 센서 데이터 측정결과 30° 이상의 각도의 움직임을 감지했을 때 정상적으로 사고 방지를 위해 전원이 차단되는 것을 확인 할 수 있었다.

• 한국운동역학회지
• /
• 제31권1호
• /
• pp.1-15
• /
• 2021

Objective: The aim of this study was to investigate 1) the difference in static lower extremity alignment (SLEA) according to a history of lateral ankle sprain (LAS), 2) to identify SLEA factors affecting LAS, and 3) to present the cut-off value and 4) the usefulness and limitations of the SLEA measurement. Method: This case-control study recruited 88 men (age: 27.78±4.69 yrs) and 39 women (age: 24.62±4.20 yrs) subjects with and without LAS. SLEA measurement protocol included Q angle, tibiofemoral angle, genu recurvatum, rear foot (RF) angle, tibal varum and torsion, navicular drop, ankle dorsiflexion range of motion (DF ROM). Independent t-test, logistic regression and receiver operating characteristic (ROC) curve were used for statistical analysis. Results: Men with a history of LAS had significantly smaller Q angles both in standing and in supine position, while women with a history of LAS had significantly greater DF ROM in non-weight bearing (NWB; p < 0.05). Logistic regression model suggests tibial varum (OR = 0.779, p = 0.021) and WB DF ROM (OR = 1.067, p = 0.045) were associated with LAS in men. In case of women, there were no significant SLEA factors for LAS, however, ROC curve analysis revealed standing RF angle (AUC = 0.647, p = 0.028) and NWB DF ROM (AUC = 0.648, p = 0.026) could be affecting factors for LAS. Conclusion: There are differences in SLEA according to the history of LAS, furthermore, the identified items were different by sex. In case of men, tibial varum and WB DF ROM affect LAS occurrence. Standing RF angle and NWB DF ROM of women could be a predictor for LAS. However, since the sensitivity and specificity in most of the SLEA measurements are low, kinematic in dynamic tasks should be considered together for a more accurate evaluation of LAS risk.

• Journal of Korean Neurosurgical Society
• /
• 제59권6호
• /
• pp.610-614
• /
• 2016

Objective : The purpose of this study was to present the outcome of the microsurgical foraminotomy via Wiltse paraspinal approach for foraminal or extraforaminal (FEF) stenosis at L5-S1 level. We investigated risk factors associated with poor outcome of microsurgical foraminotomy at L5-S1 level. Methods : We analyzed 21 patients who underwent the microsurgical foraminotomy for FEF stenosis at L5-S1 level. To investigate risk factors associated with poor outcome, patients were classified into two groups (success and failure in foraminotomy). Clinical outcomes were assessed by the visual analogue scale (VAS) scores of back and leg pain and Oswestry disability index (ODI). Radiographic parameters including existence of spondylolisthesis, existence and degree of coronal wedging, disc height, foramen height, segmental lordotic angle (SLA) on neutral and dynamic view, segmental range of motion, and global lumbar lordotic angle were investigated. Results : Postoperative VAS score and ODI improved after foraminotomy. However, there were 7 patients (33%) who had persistent or recurrent leg pain. SLA on neutral and extension radiographic films were significantly associated with the failure in foraminotomy (p<0.05). Receiver-operating characteristics curve analysis revealed the optimal cut-off values of SLA on neutral and extension radiographic films for predicting failure in foraminotomy were $17.3^{\circ}$ and $24^{\circ}s$, respectively. Conclusion : Microsurgical foraminotomy for FEF stenosis at L5-S1 level can provide good clinical outcomes in selected patients. Poor outcomes were associated with large SLA on preoperative neutral (>$17.3^{\circ}$) and extension radiographic films (>$24^{\circ}$).

• 폴리머
• /
• 제32권3호
• /
• pp.256-262
• /
• 2008

폴리아믹산(PAA)의 열 이미드화 반응을 이용해서 4,4'-(hexafluoroisopropylidene)diphthalic anhydride(6FDA)와 bis[4-(3-aminophenoxy)phenyl]sulfone(BAFS)의 단량체에 2,2-bis[4-(4-amino-phenoxy)phenyl]hexafluoropropane(BAPP)의 다양한 몰 비에 따른 삼불소메틸($CF_3$) 곁가지를 가지는 공중합체 폴리이미드(PI)를 합성하였다. 이 공중합체 PI는 N,N'-dimethylacetamide(DMAc)와 같은 용매에 잘 녹았으며 용액 캐스팅하여 얻은 필름은 유연하고 질긴 성질을 보였다. 공중합체 PI 필름의 열적-기계적 성질, 모폴로지 및 광학 투명도들을 측정하기 위해 시차 주사 열 분석기(DSC)와 열 중량 분석기(TGA), 넓은 각 X-선 회절도(XRD), 주사 전자현미경(SEM), 만능 인장 시험기(UTM) 그리고 자외선-가시광선 흡광도기(UV-Vis. spectrometer) 등을 사용하였다. 얻은 공중합체 PI 필름은 투명하였으며, 각 필름의 cut-off wavelength(${\lambda}_0$)은 $275{\sim}319\;nm$이었고, 노란색 지수(yellow index: YI)는 $3.65{\sim}10.37$의 값을 보여주었다. 공중합체 PI 필름의 열적-기계적 성질들은 BAPP의 몰비가 증가할수록 증가하였지만, 광학적 특성에서는 반대의 결과를 보여주었다.

• 대한치과교정학회지
• /
• 제25권2호
• /
• pp.153-163
• /
• 1995

본 연구는 III급 부정 교합을 판별하는데 있어, 수평 부조화의 진단에 이용되는 여러 진단 항목들의 진단학적 효율과 타당성을 ROC analysis로 비교하는데 그 목적이 있다. ROC(Receiver Operating Characteristic) analysis는 연속적으로 변하는 cut-off value에서의 sensitivity와 1-specificity에 의해 그려지는 곡선으로서 진단 방법의 타당성을 결정하고, 여러 진단 방법들을 비교하는 분석법으로 알려져 있다. 부정교합자 496명을 대상으로 측모 두부 X-선 계측사진과 진단모형을 이용하여, 진단모형 계측을 통해 부정교합군을 분류하였으며, 이중 III급 부정 교합자는 245명이었다. 측모 두부 X-선계측사진에서 16개의 계측항목을 선정하였으며, 이 계측항목들과 III급 부정교합의 관계를 알아보고자 각도 계측항목에서는 $1^{\circ}$ 간격으로, 선계측항목에서는 1mm의 간격으로 sensitivity와 specificity를 구해 ROC curve를 그렸다. 그리고, 이 계측항목들의 직접적인 비교를 위해 ROC curve 아래의 면적을 계산해냈다. 결과는 다음과 같다. 1. III급 부정교합을 판별하는데 있어, "Wits" appraisal이 다른 계측 항목에 비해 더 나은 진단 효율을 보였다. 2. AB plane angle, ANB angle, App-Bpp distance, AF-BF distance, APDI, N perpendicular to A 와 Pog to N perpendicular의 차이, maxillomandibular differential도 높은 진단 가치를 보였다. 3. 하악골의 위치를 평가하는 계측항목은 중정도의 진단 효율을 보였다. 4. 상악골에 대한 계측항목은 III급 부정교합의 판별에 대한 진단 가치가 낮았다.

• Journal of Korean Neurosurgical Society
• /
• 제64권4호
• /
• pp.575-584
• /
• 2021

Objective : Cervical expansive laminoplasty is an effective surgical method to address multilevel cervical spinal stenosis. During surgery, the spinous processes of C2 and C7 are usually preserved to keep the insertion points of the cervical musculature and nuchal ligament intact. In this regard, dome-like laminectomy (undercutting of C7 lamina) instead of laminoplasty is performed on C7 in selected cases. However, resection of the lamina can weaken the C7 lamina, and stress fractures may occur, but this complication has not been characterized in the literature. The objective of the present study was to investigate the incidence and risk factors for C7 laminar fracture after C7 dome-like laminectomy and its impact on clinical and radiological outcomes. Methods : Patients who underwent cervical open-door laminoplasty combined with C7 dome-like laminectomy (n=123) were classified according to the presence of C7 laminar fracture. Clinical parameters (neck/arm pain score and neck disability index) and radiologic parameters (C2-7 angle, C2-7 sagittal vertical axis, and C7-T1 angle) were compared between the groups preoperatively and at postoperatively at 3, 6, 12, and 24 months. Risk factors for complications were evaluated, and a formula estimating C7 fracture risk was suggested. Results : C7 lamina fracture occurred in 32/123 (26%) patients and occurred at the bilateral isthmus in 29 patients and at the spinolaminar junction in three patients. All fractures appeared on X-ray within 3 months postoperatively, but patients did not present any neurological deterioration. The fracture spontaneously healed in 27/32 (84%) patients at 1 year and in 29/32 (91%) at 2 years. During follow-up, clinical outcomes were not significantly different between the groups. However, patients with C7 fractures showed a more lordotic C2-7 angle and kyphotic C7-T1 angle than patients without C7 fractures. C7 fracture was significantly associated with the extent of bone removal. By incorporating significant factors, the probability of C7 laminar fracture could be assessed with the formula 'Risk score = 1.08 × depth (%) + 1.03 × length (%, of the posterior height of C7 vertebral body)', and a cut-off value of 167.9% demonstrated a sensitivity of 90.3% and a specificity of 65.1% (area under the curve, 0.81). Conclusion : C7 laminar fracture can occur after C7 dome-like laminectomy when a substantial amount of lamina is resected. Although C7 fractures may not cause deleterious clinical outcomes, they can lead to an unharmonized cervical curvature. The chance of C7 fracture should be discussed in the shared decision-making process.

• 대한족부족관절학회지
• /
• 제23권4호
• /
• pp.159-165
• /
• 2019

Purpose: This study investigated the recurrence rate after performing hallux valgus correction using scarf and Akin osteotomy, and also identified the correlation and cut-off values of both the preoperative and postoperative radiographic parameters as risk factors for the recurrence of hallux valgus. Materials and Methods: We reviewed 87 hallux valgus patients (122 feet) who received scarf and Akin osteotomy from January 2007 to August 2015. The clinical outcomes were evaluated using the visual analogue scale (VAS) and American Orthopaedic Foot and Ankle Society (AOFAS) scores. The radiological outcome measures included the hallux valgus angle (HVA), intermetatarsal angle (IMA), and distal metatarsal articular angle (DMAA) as determined on the serial weight bearing radiographs. Recurrence was defined as more than 20 degrees of HVA noted on the final follow-up radiograph. Those radiological factors associated with recurrence were evaluated and analyzed. Results: The mean follow-up duration was 20.6 months (12.0~46.5 months) and the mean age was 44 years (13~80 years). The VAS and AOFAS scores were significantly improved at the time of the final follow-up (7.0 to 2.0, p<0.001; 78.0 to 92.0, p<0.001; respectively). Significant corrections in the HVA, IMA, and DMAA were obtained (p<0.001). Eleven (9.0%: 11/122) cases experienced recurrent hallux valgus deformity. The postoperative IMA, DMAA and HVA showed significant moderate to strong correlation with HVA at the final follow-up (Pearson correlation coefficient: 0.44, 0.70, and 0.88, respectively; p<0.001). Postoperative HVA>16.7 degrees, postoperative DMAA>13.9 degrees, and postoperative IMA>8.2 degrees showed statistically significant correlation with radiological recurrence at the last follow-up, and the odds ratio of each variable was high in order. Conclusion: Our radiographic results indicated that postoperative HVA>16.7 degrees, postoperative DMAA>13.9 degrees, and postoperative IMA>8.2 degrees can be risk factors for hallux valgus recurrence. These risk factors may be helpful for modifying surgical procedures and preventing the recurrence of hallux valgus.

• 대한치과교정학회지
• /
• 제43권6호
• /
• pp.279-287
• /
• 2013

Objective: To investigate the dentoskeletal factors which may predict soft-tissue chin strain during lip closure. Methods: The pretreatment frontal and lateral facial photographs and lateral cephalograms of 209 women (aged 18-30 years) with Angle's Class I or II malocclusion were examined. The subjects were categorized by three examiners into the no-strain and strain groups according to the soft-tissue chin tension or deformation during lip closure. Relationships of the cephalometric measurements with the group classification were analyzed by logistic regression analysis, and a classification and regression tree (CART) model was used to define the predictive variables for the group classification. Results: The lower the value of the overbite depth indicator (ODI) and the higher the values of upper incisor to Nasion-Pogonion (U1-NPog, mm), overjet, and upper incisor to upper lip (U1-upper lip, mm), the more likely was the subject to be classified into the strain group. The CART showed that U1-NPog was the most prominent predictor of soft-tissue chin strain (cut-off value of 14.2 mm), followed by overjet. Conclusions: To minimize strain of the soft-tissue chin, orthodontic treatment should be oriented toward increasing the ODI value while decreasing the U1-NPog, overjet, and U1 upper lip values.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.306-306
• /
• 2012

사파이어 단결정은 LED 소자의 기판으로 널리 사용되고 있으며 현재 소재 수율을 향상시키기 위하여 6인치 이상의 대구경 웨이퍼를 만들기 위하여 많은 노력을 경주하고 있다. 단결정, 특히 반도체 단결정 웨이퍼에서($00{\cdot}1$), ($11{\cdot}0$) 등의 어떠한 결정학적인 방위(crystallographic orientation)가 표면과 이루는 각도, 즉 표면방위각(off-cut 또는 misorientation angle)의 크기와 방향은 제조된 LED 소자의 물성에 영향을 끼치므로 웨이퍼를 가공할 때 정확하게 컨트롤해야한다. 본 연구에서는 고분해능 X-선을 이용하여 표면이 결정학적 방향과 이루는 면방위각을 정밀하게 결정하는 측정법을 연구하였다. 본 연구에서는 기존의 ASTM 의 측정법과는 다른 원리를 이용하고 웨이퍼의 휨(bending)이나 측정고니오 회전축의 편심과 무관하게 표면방위각을 결정하는 새로운 이론적 모델을 제시하고 그 모델을 적용하여 표면의 수직축이 대구경 사파이어($00{\cdot}1$) 축과 이루는 표면방위각을 정확하게 측정 분석하였다. 그리고 이러한 측정방법의 장점을 이용하여 ASTM의 측정법과 면방위 측정 결과를 비교 분석 하였다. 150 mm 사파이어 웨이퍼를 ASTM의 방법으로 면방위를 측정하였을 때 고분해능 장비에서 회전축 ${\Phi}$의 기준을 다르게 설정함에 따라서 수직/수평 면방위 측정결과가 많은 차이를 보였다. 그러나 본 연구에서 사용한 측정법에서는 이러한 수직/수평 면방위의 값들이 거의 변화하지 않고 일정하게 나타나는 것을 확인 하였으며, 측정한150 mm 사파이어 웨이퍼의 표면방위각은 $0.21^{\circ}$이고 표면각이 나타나는 방향은 웨이퍼의 primary edge 방향으로부터 $1.2^{\circ}$벗어나 있는 방향이었다.

• 한국전자통신학회논문지
• /
• 제15권1호
• /
• pp.173-178
• /
• 2020

다중-광선 모델을 이용하여 경사면을 갖는 반-협곡 구조에서 전파 전송 손실을 해석하고 경사면의 각도에 따라 나타나는 다중-광선 전파 모델을 공식화 하였다. 경사면의 기울어진 각도에 의해 결정되는 송수신 전파의 경사면 반사경로인 제3경로와 제4경로에 대한 차단 각도를 송수신 단말의 높이와 위치를 가지고 계산하였다. 경사면 환경에서 전파 전송 손실을 예측하기 위하여 실제 경사면이 존재하는 제방 환경을 선택하여 모델링하고 시뮬레이션 하여 전파 전송 손실을 계산하였으며, 주파수 1-6GHz 대역에 대한 측정활동을 통해 전파전송 손실을 확인하였다. 시뮬레이션 결과와 측정 결과는 유사한 전파 전송 손실 경향을 보여주었으며 다양한 지형정보에 대한 전파 경로 손실 예측과 측정 결과들은 다양한 전파 업무 설계에 활용될 수 있다.