• 분석과학
• /
• 제22권1호
• /
• pp.51-56
• /
• 2009

천리포 해안사구 퇴적층에 대한 연대측정을 Optically Stimulated Luminescence (OSL)을 이용하여 Single Aliquot Regeneration (SAR) 법 중 열처리 조건을 일부 수정하여 실시하였다. 예열과 cut-heat을 각각 $260^{\circ}C$ 10 초 $-220^{\circ}C$ 0 초와 $270^{\circ}C$ 10 초 $-270^{\circ}C$ 10 초의 두 가지 조합을 적용하였다. 예열 및 cutheat의 열처리 과정을 변화시킴으로써 원하는 신호만을 선별하는 것이 가능했으며, 이를 등가선량을 구하는데 이용하였다. 또한 시료를 $75{\mu}m$, $150{\mu}m$, $200{\mu}m$의 표준체로 크기를 4개의 영역으로 구분하였고, 열처리 조건의 변화와 입자의 크기가 달라짐에 따라 등가선량이 다르게 측정되어 다른 연대가 산출되었다. 그 결과는 방사성탄소연대측정법에 의한 연대와 비교하였다. 입자의 크기에 따라 다른 연대가 산출된 것으로 미루어 천리포 해안사구 퇴적지층은 토양의 유입원이 혼합되어 구성되었음을 추정할 수 있었다.

• 한국기계가공학회지
• /
• 제2권4호
• /
• pp.40-45
• /
• 2003

In this paper, to choose the optimum CBN wheel for Internal Grinding at LM Guide, among 7 types of CBN-wheels, the 2 types of CBN-wheels, which were the macrofracture CBN wheel and the microfracture CBN wheel, have been used, and the SCM420H have been used as the workpiece. The working conditions in the grinding experiments were depth-of-cut, table speed, and spindle speed for 4 types of the CBN grinding wheels, 2 types of the lubrications. By the experiments, the loading effect of the microfracture types of the CBN-wheel needed a short dressing interval and resulted in grinding wheel wear and bad surface roughness. However, a macrofracture type of CBN-wheel with the concentration of 100, CB120Q100V showed the best surface roughness quality at a low table speed for internal grinding at LM-guide.

• 한국생산제조학회지
• /
• 제20권4호
• /
• pp.495-501
• /
• 2011

The purpose of this study is to improve the roundness of CNC turning so that helps the operator to choose the right turning conditions to produce a product with the given parameters. This paper focuses on determining the optimal levels of machining factors for circular shaft with CNC turning. For this purpose, the optimization of factors is performed based on experimental design method. A design and analysis of experiments are conducted to study the effects of these factors on the roundness by using the SIN ratio, analysis of ANOVA, and F-test. Factors, namely, fixed pressure, wall thickness, depth of cut, and feed rate are optimized with consideration of the roundness. The boring tool used in this study is a tungsten carbide coated. The material of workpiece is Al6061 and the machining method is dry cutting.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 춘계학술대회 논문집
• /
• pp.88-95
• /
• 1997

This study provides the useful actual data instead of the experience data using in industrial fields. Especially, values of each components of cutting force are effective in the rake angle, setting angle and cutting area. Many researches have been made on the work piece materials, kinds of bite materials, rake angle, nose radius and depth of cut, but a few on the bite setting angle. In order to select optimal cutting speed, it was summarized the following results are achieved; A chieved that an affect of cutting resistance on the setting angle is a little under giving experimental conditions and therefore a worker can be choose the value of it randomly.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.83-88
• /
• 2001

In order to suggest the proper optimal conditions of the CNC milling machining for the Thin-wall surface, some experiments were carried out. The process was applied in the aerospace industry for the machining of light alloys, notably aluminium. In recent year, however, the mold and die industry has begun to use the technology for the production of components, including those manufactured from hardened tool steels. And the end mill is an important tool in the milling process. A typical example for the end mill is the milling of pocket and slot in which a lot of material is removed from the workpiece. Therefore the proper selection of cutting parameter for end milling is one of the important factors affecting the cutting cost. In this paper, we choose the optimal parameters(cutting forces) to cut thin-walled Al part by experiment.

• 한국생산제조학회지
• /
• 제6권3호
• /
• pp.103-110
• /
• 1997

This study provides the useful actual data instead of the experience data using in industrial fields. Especially, values of each components of cutting force are effective in the rake angle, setting angle and cutting area. Many researches have been made on the work piece materials, kinds of bite materials, rake angle, nose radius and depth of cut, but a few on the bite setting angle. In order to select optimal cutting speed, it was summarized the following results are achieved; A chieved that an affect of cutting resistance on the setting angle is a little under giving experimental conditions and therefore a worker can be choose the value of it randomly.

• 전기화학회지
• /
• 제15권3호
• /
• pp.115-123
• /
• 2012

리튬이차전지의 수요가 소형 휴대용 전자기기에서 중대형 전기자동차와 에너지저장장치로 변화함에 따라, 요구되는 전지 특성도 크게 달라지고 있다. 10년 이상의 장기 신뢰성, 팩 수준의 안전성, 가격 경쟁력 확보 등 기존 소형 전지보다 크게 강화된 요구 조건뿐만 아니라, 고출력 특성도 함께 필요로 한다. 그런데, 출력을 측정하기 위해서는 전압과 전류가 동시에 측정 및 제어되어야 하기 때문에, 기존의 단위셀 용량 측정보다 훨씬 어렵다. 또한, 측정 방법의 선택뿐만 아니라 출력유지시간, 충전상태(State-of-Charge, SOC), Cut-off 조건, 측정온도 등의 측정 조건에 따라서도 그 측정값이 크게 달라지는 경향이 있다. 본 논문에서는 HPPC (Hybrid Pulse Power Characterization)법, J-pulse(Japan Electric Vehicle Association Standards, JEVS D 713)법, 정출력 측정법(Constant Power Measurement)의 측정 원리 및 실제 실험에 어떻게 적용해야 하는지 설명하고, HEV(Hybrid Electric Vehicle)용 단위셀을 이용해 출력법간 측정 결과를 비교 분석한다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권18호
• /
• pp.8625-8628
• /
• 2016

Background: Central lymph node metastasis(CLNM) is common in papillary thyroid microcarcinoma (PTMC). The aim of this study was to define the pathohistologic risk grading based on surgical outcomes. Materials and Methods: Statistical analysis was performed to figure out the optimal cut-off values of size in preoperative ultrasound images for defining the risk of CLNM in papillary thyroid microcarcinoma. Receiver operating characteristic curves (ROC) studies were carried out to determine the cutoff value(s) for the predictor(s). All the patients were divided into two groups according to the above size and the clinic-pathological and immunohistochemical parameters were compared to determine the significance of findings. Results: The optimal cut-off value of tumor size to predict the risk of CLNM in papillary thyroid microcarcinoma was 0.575 cm (area under the curve 0.721) according to the ROC curves. Significant differences were observed on the multifocality, extrathyroidal extension and central lymph node metastasis between two groups which were divided according to the tumor size by the cutoff values. Patients in two groups showed different positive rate and intensity of Ki67. Conclusions: The size of PTMC in ultrasound images are helpful to predict the aggressiveness of the tumors, it could be an easy predictor for PTMC prognosis and assist us to choose treatment.

• The Journal of Asian Finance, Economics and Business
• /
• 제9권9호
• /
• pp.309-316
• /
• 2022

In 2011, the 4^th industrial revolution officially occurred and developed in most countries. The fourth industrial revolution has given organizations numerous business opportunities, enabling them to optimize their manufacturing processes, cut costs, and thereby improve their operations. The development of enterprises is a decisive factor in increasing national productivity, thereby improving economic growth and per capita income. Therefore, it is necessary to grasp the digital transformation plan and apply science and technology to domestic enterprises and improve the operational efficiency of the economy. Research on small and medium enterprises in Hanoi, Vietnam, which is considered a successful country in economic development and digital transformation and has become a middle-income economy and a highly open economy, the research results suggest that the ability to apply technology in businesses is capable of improving corporate financial performance. The choice of capital structure favoring debt has a negative effect on the financial performance of the enterprise; that is, enterprises in Vietnam should limit the choice of financing investment projects with debt, on the contrary, enterprises should choose to finance with equity. Finally, the study also discusses managerial implications for improving business performance in the context of the rapidly evolving 4.0 technology revolution.

• 한국정보보호학회:학술대회논문집
• /
• 한국정보보호학회 1994년도 종합학술발표회논문집
• /
• pp.51-66
• /
• 1994

A divisible off-line electronic cash system based on cut-and-choose has first been proposed by [OO91] and recently more efficient single term divisible cash system was presented in [EO94] which is based on Brand's scheme [Bra93]. In this paper, we present a different type of single term divisible electronic cash system which is more efficient than previously proposed systems such as [OO91], [YLR93], and [EO94] in the standpoint of the amount of communication, the number of modular multiplications required in the payment transactions, and the storage requirement in the withdrawal protocol. Our scheme is a modified version of [LL93], where the major improvement has been made in its withdrawal transaction to introduce untraceability and multi-spendability. We have borrowed the idea of the withdrawal protocol of our scheme from [EO94] with minor modifications. Transferability in our scheme allows only a finite number of transfer. Our scheme satisfies an the desirable properties of an electronic cash system such as untraceability, divisibility and transferability. In addition, we present a n-spendable cash. The basic idea of extension to multi-spendability has been borrowed from [Bra93] with minor modifications.