• 한국조경학회지
• /
• 제28권2호
• /
• pp.108-121
• /
• 2000

This study seeks what kind of factors influence to locate dwellings and to establish scenic spots in nature by a case study focused on a meandering stream. The study specially concentrates on the interrelationship between both residences and beautiful sceneries and a meander cut-off-area that reveals a special topographical characteristics, located at Samji village in Youngyang-eup, Youngyang-gun, Koungsangbuk-do. The meander cut-off area, developed at the middle or upper reaches of a river, often makes up specific landscapes such as precipitous cliffs, sheer cliffs and caves. And the area where is specially created by sudden change of flow due to erosion ;perceived by the cut surface to be the most beautiful scenic spot. These beautiful landscapes were used to be called as Dae, Dam or Gul and managed by Confucian scholars who enjoy refined taste and devote themselves to the study in nature. Moreover, the Ku-Hado-literary means the area of ex-flow-made the scholars' lving with a well prepared basis for agriculture where supplied a cornucopia of organic matters and water. The merit of agriculture made it possible that the scholars became economically independent, and the fact might be the essential point why the meander cut-off area took noticed. Actually, Cho-family has been in Smaji Village for generations, producing a large number of scholars and keeping the actual power of the region. The physical shape of the meander cut-off area, cozily surrounded by mountains, is considered as a good place for the dwelling due to the influence of traditional sight of view for location and P'ungsuchiri which is known as Feng Shui in China and geomancy in the western world. It is a fruit in it own way that we could find the ancestors' discernment and wisdom from this study, who have lived their lives adapting themselves to the given natural environment and also utilizing the nature wisely. But this is a current-argued study on the meander cut-off area. Follow-up studies have to be continued about the landscapes of the meander streams and the meander cut-off areas scattered all over the country except Samji Village and draw the characteristics from the comparative analysis.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.184-189
• /
• 1998

In the CNC lathe working, the study of the effects of various cutting conditions on cut surface roughness is less active than that of the ordinary latee. After lathe working of SM45C, a carbon steel material for machine structure, its surface roughness was measured using a stylus surface roughness tester. In most cases, good surface roughness was obtained over 160m/min cutting speed and then the proper cutting depth was found as 1.0~1.5mm.

• 지질공학
• /
• 제19권2호
• /
• pp.191-203
• /
• 2009

본 연구에서는 대규모 절개사면에서 억지말뚝의 효과를 확인하고, 사면과 억지말뚝의 거동을 조사하였다. 먼저, 사면의 절토공사시 경사계를 이용하여 사면지반의 거동을 조사하였다. 계측결과 사면지반의 수평변위는 점차적으로 증가하고, 사면활동면의 발생위치에서 급격히 감소하는 것으로 나타났다. 이를 통하여 사면활동깊이의 예측이 가능하였다. 사면활동면의 예측을 통하여 억지말뚝의 설계와 시공이 수행되었다. 그리고 억지말뚝으로 보강된 절개사면에 대하여 각종 계측시스템을 적용하여 억지말뚝의 거동을 조사하였다. 계측결과 억지말뚝의 수평변위는 켄틸레버보의 변형형상과 유사하게 발생되었으며, 말뚝두부의 철근콘크리트보의 설치로 인하여 두부의 수평변위 억제효과를 확인할 수 있다. 억지말뚝의 최대휨응력이 발생되는 깊이는 대상지반의 상부토사층이 존재하는 깊이와 유사한 것으로 나타났다. 또한, 쏘일네일링 시공을 위한 억지말뚝 전면부 사면굴착시 억지말뚝의 수평변위가 증가함을 알 수 있다. 본 연구를 통하여 대규모 절개사면에 대하여 억지말뚝의 적용성 및 효과를 확인할 수 있다.

• 한국환경과학회지
• /
• 제11권2호
• /
• pp.111-120
• /
• 2002

Asian dust(or yellow sand) occurs mainly in spring and occasionally in winter in east Asia, when the weather conditions are under an upper trough/cut-off low and surface high/low pressure system during blocking episode days associated with the stationary patterns of the upper level jet stream. The transport mechanism for Asian dust during the blocking episode days in spring 2001 was analyzed using the TOMS aerosol index and meteorological mesoscale model 5(MM5). Based on the E vector, an extension of an Eliassen-Palm flux, the blocking episode days were found to be associated with the development of an upper cut-off low and surface cyclones. Concurrently, the occurrence of dust storms was also determined by strong cold advection at the rear of a jet streak, which exhibited a maximum wind speed within the upper jet stream. As such, the transport mechanism for Asian dust from China was due to advection of the isentropic potential vorticity(IPV) and isentropic surfaces associated with tropopause folding. The transport heights for Asian dust during the blocking episode days were found to be associated with the distribution of the isentropes below the IPV At the same time, lee waves propagated by topography affected the downward motion and blocking of Asian dust in China. The Asian dust transported from the dust source regions was deposited by fallout and rain-out with a reinforcing frontogenesis within a surface cyclone, as determined from satellite images using TOMS and GMS5. Accordingly, these results emphasize the importance of forecasting jet streaks, the IPV, and isentropes with geopotential heights in east Asia.

• 한국식품과학회지
• /
• 제38권1호
• /
• pp.28-34
• /
• 2006

연구에서는 세정 및 표면살균처리 시스템을 개발 제작에 의한 세정, 표면살균처리 및 저장효과를 살펴보기 위해 치커리를 시료 로 수확후 저장기간별 품질평가를 실시하였다. 표면살균처리를 위해 오존수와 염소수를 사용한 결과 3 ppm 오존수와 염소수 100 ppm의 표면살균 처리는 미생물적 결과에서 커다란 차이를 보이지 않았으나, 두 살균수 모두 식품가공에 있어 제균력을 가지고 있음을 확인 할 수 있었다. 처리 조건을 신선편이 치커리에 적용해본 결과 저장 조건에 있어서는 $4^{\circ}C$에서 시료들은 관능적 평가에 있어서 9일까지는 양호한 상태를 보였으나, 이화학적 특성인 총비타민C와 총클로로필 함량을 시험해보았을 때, 영양소적 손실을 보였고, $10^{\circ}C$에 저장한 치커리의 경우 6일 이후 급격히 상품가치를 잃었다. 본 연구 결과를 토대로 위생적이고 안전한 최 소가공 농산물의 생산을 위하여 기계세정을 이용한 공정시간의 단축과 살균과정을 이용하여 식품 안전성의 위험이 될 수 있는 미생물의 오염을 막을 수 있고, 오존수를 이용하여 염소수 소독에 의존하고 있는 일반적인 생산과정의 중점관리로 지적되었던 사항을 개선할 수 있는 새로운 위생관리 방안으로써 이용 가치 있다고 평가된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.779-780
• /
• 2013

• Geomechanics and Engineering
• /
• 제21권1호
• /
• pp.23-33
• /
• 2020

An advancing cutting roof for gob-side entry retaining with no-pillar mining under specific geological conditions is more conducive to the safe and efficient production in a coalmine. This method is being promoted for use in a large number of coalmines because it has many advantages compared to the retaining method with an artificial filling wall as the gateway side filling body. In order to observe the inner structure of the gateway cutting roof and understand its stability mechanism, an equivalent material simulation experiment for a coalmine with complex geological conditions was carried out in this study. The results show that a "self-stabilization bearing structure" equilibrium model was found after the cutting roof caving when the cut line deviation angle was unequal to zero and the cut height was greater than the mining height, and the caving roof rock was hard without damage. The model showed that its stability was mainly controlled by two key blocks. Furthermore, in order to determine the optimal parameters of the cut height and the cut line deviation angle for the cutting roof of the retaining gateway, an in-depth analysis with theoretical mechanics and mine rock mechanics of the model was performed, and the relationship between the roof balance control force and the cut height and cut line deviation angle was solved. It was found that the selection of the values of the cut height and the cut line deviation angle had to conform to a certain principle that it should not only utilize the support force provided by the coal wall and the contact surface of the two key blocks but also prevent the failure of the coal wall and the contact surface.

• 한국정밀공학회지
• /
• 제19권2호
• /
• pp.106-113
• /
• 2002

Stencil is used normally as a mask for seeder pasting on pad of PCB. The objective of this study is to develop stencil cutting system and determine optimal conditions which make good-quality stencil by using a Nd:YAG laser. The effects of process parameters such as laser power, type of mask, gas pressure, cutting speed and pulse width old the cut edge quality were investigated. In order to analyse fille cut surface characteristics(roughness, kerf width, dross) optical microscopy, SEM photography and roughness test were used. As a result, the optimal conditions of process parameters were determined, and the practical feasibility of the proposed system is also examined by using a commercial Gerber file for PCB stencil manufacturing.

• Ocean and Polar Research
• /
• 제27권3호
• /
• pp.277-288
• /
• 2005

Spatial distribution and vertical structures of water masses around the Antarctic continental margin are described using synthesized hydrographic data. Antarctic Surface Water (AASW) over the shelf regime is distinguished from underlying other water masses by the cut-off salinity, varying from approximately 34.35 to 34.45 around Antarctica. Shelf water, characterized by salinity greater than the cut-off salinity and potential temperature less than $-17^{\circ}C$, is observed on the Ross Sea, off George V Land, off Wilkes Land, the Amery Basin, and the Weddell Sea, but in some shelves AASW occupies the entire shelf. Lower Circumpolar Deep Water is present everywhere around the Antarctic oceanic regime and in some places it mixes with Shelf Water, producing Antarctic Slope Front Water (ASFW). ASFW, characterized by potential temperature less than about $0^{\circ}C$ and greater than $-17^{\circ}C$, and salinity greater than the cut-off salinity, is found everywhere around Antarctica except in the Bellingshausen-Amundsen sector. The presence of different water masses over the Antarctic shelves and shelf edges produces mainly three types of water mass stratifications: no significant meridional property gradient in the Bellingshausen and Amundsen Seas, single property gradient where ASFW presents, and a V-shaped front where Shelf Water exists.

• 한국안전학회지
• /
• 제24권2호
• /
• pp.7-12
• /
• 2009

The machining process of ceramics can be characterized by cracking and brittle fracture. In the machining of ceramics, edge chipping and crack propagation are the principal reasons to cause surface integrity deterioration. Such phenomenon can cause not only poor dimensional and geometric accuracy, but also possible failure of the ceramic parts. Thus, traditional ceramics are very difficult-to-cut materials. Generally, ceramics are machined using conventional method such as grinding and polishing. However these processes are generally costly and have low MRR(material removal rate). To overcome such problems, in this paper, h-BN powder, which gives good cutting property, is added for the fabrication of machinable ceramics by volume of 10 and 15%. The purpose of this study is an analysis of endmill's rake angle for appropriate tools design and manufacturing for the machinable ceramics. In this study, Experimental works are executed to measure cutting force, surface roughness, tool fracture, on different axial rake angle of endmills. Cutting parameters, namely, feed, cutting speed and depth of cut are used to accomplish purpose of this paper. Required experiments are performed, and the results are investigated.