• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.5
• /
• pp.211-217
• /
• 2019

The three major inventions of Jeju include the field wall of Kim Koo Pan Gwan in 1234, Jeongnang in the custom of grazing the people of Jeju, and Olleh in the tomb of Munbang-gui in 1406. Field wall, Oedam from the stone and the stone of numerical play, made Koendang, a friendship society. Even with a typhoon that is more than 30m/s, the Koendang which is about 1.5m high, will not collapse. Similarly, the main family networks of Jeju society do not collapse under any difficulties situation. When building a field wall, two stones, which are under the ground, are placed side by side, and the upper left stone is placed on top and the upper right stone is attached regularly. One stone or two stone is attached from the bottom to the top, and when a stone is small or large, a flat field is formed in one space. The Family networks is close to the grandfather, grandmother, father, mother, and me, and the distant kin represents a horizontal relationship. The field wall is a vertical relationship that builds up from bottom to top of the vertical relation, while the Koendang is a horizontal relationship where blood is distributed to the grandson of his upper grandparents. This paper proves by a non-orthogonal symmetric weighted Hadamard matrix of whether the stone in the middle of a field wall has large stones (small).

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.3
• /
• pp.157-166
• /
• 2018

Purpose: This study was aimed to compare the consistency between the custom abutment design and the output in two CAD software programs. Materials and Methods: Customized abutments were designed by using 3Shape Dental System CAD software and Delta9 CAD software on a plaster model with implants (CRM STL file). After milling of the designed abutments, the abutments were scanned with a contact method scanner (Test STL file). We overlaid the Test STL file with each CRM STL file by using inspection software, and then compared the milling reproducibility by measuring the output error of the specimens from each CAD software program. Results: The Delta9 showed better milling reproducibility than 3Shape when comparing the milling errors obtained with a full scan of all specimens (P < .05) and also when comparing the axial wall region specifically according to the axial angle. With 0.9 mm marginal radius, the Delta9 showed better consistency between the design and the output than 3Shape (P < .05). While, anti-rotation form had no significant difference in error between the two systems. When cumulative errors were compared, the Delta9 showed better milling reproducibility in almost cases (P < .05). Conclusion: Delta9 showed a significantly smaller error for most of the abutment design options. This means that it is possible to facilitate generation of printouts with reliable reproducibility and high precision with respect to the planned design.

• The Journal of Engineering Geology
• /
• v.33 no.4
• /
• pp.639-655
• /
• 2023

Recently, there has been a growing demand for underground space, leading to the utilization of earth retaining walls for deep excavations. Earth retaining walls are structures that are susceptible to displacement, and their measurement and management are carried out in accordance with the standards established by the Ministry of Land, Infrastructure, and Transport. However, managing displacement through measurement can be considered similar to post-processing. Therefore, in this study, we not only predicted the horizontal displacement of a retaining wall with ground anchors installed using machine learning, but also analyzed the impact of the prediction model based on data scaling and data splitting methods while learning measurement data using machine learning. Custom splitting was the most suitable method for learning and outputting measurement data. Data scaling demonstrated excellent performance, with an error within 1 and an R-squared value of 0.77 when the anchor tensile force and water pressure were standardized. Additionally, it predicted a negative displacement compared to a model that without scaling.

• Journal of the Korean housing association
• /
• v.2 no.2
• /
• pp.21-33
• /
• 1991

In veiw of the results that the spatial peculiarity of the residential environment has been analyzed through the investigation of live on the change and use of the space of housing in the village of Bongsung, which is a traditional farming village of Cheju Island, and in the village of Hamo, which is a traditional fishing village of Cheju Island, a traditional constitution of space strongly remains in the village of Bongsungwhose family composition has been reductionized and implified, on the other side a tendency of extension or remodelling has been strongly appeared as well as a plot planning or a loose form has been appeared in the village of Hamo whose famiIy composition has been simplified and diversified and whose style of living has been also diversified, so the tianditional style which the yard has been surrounded with a stone wall has not remained. In the generation of 1970, a tendency to maintain the tranditional living style, to simply change for application, or to change for holding fast to the tradition was appeared, and the space of housing has been changed for the advanced modernization of life pattern since the generation of 1980. However, the traditional custom of life is continued.

• Journal of the Korean Society of Costume
• /
• v.35
• /
• pp.17-44
• /
• 1997

Medieval European practical art and style of costume is studied through referring to the literatures. The type of clothing that was seen on tapestries arts and crafts paintings and wall paintings and appeared in the architecture such as church. There were symbolic aspects of color motifs at this period and some restraints for clothing according to the social class, It was a period that draped garments due to the War of Crusades is appeared. Be-cause the medieval taste and decorative character is not only 'formative art' but also the taste beyoud 'mode' and atomsphere of that times it could be seen the strong reflec-tion of customs in the clothing of that times which is shown in works of art. 1) The purpose of Christian art which was found in mosaics stained glasses wall pain-tings and statues of architecture was not just the revival of natural phenomena but visuali-zation of sacred and invisible things. It was valuable to understandin of the spiritual through the sense organ It was a monumental art that was combined with decorative func-tion and role of the Bible. It revealed what was about the religious spiritual miracle, 2) In the medieval European painting characteristic and beautiful creativity was the basis of an argument. Both "Worship of East-ern" that is painted ion a parchment and "Cor-onation of Charles VI" were described decor-ation motifs on the edge of buildings geo-metric patterns and others with outstanding skill. there were precise technologic skill of architect and glassmen and lots of patience of craftsmen. " The Labour of the Months" and the scene of"A Trial at the Court" is also de-scribed elaborately. 3) Tapestry was developed in France Ger-many Swiss at the 14th century. Religionary and historical themes unicorn lady bird flowering plants and others were major motifs. It was very important as decorative wall coverings and as practical door arch and bed hangings. It was made through patient hard work with simple technique and it was con-sidered as an art for practical use. Tapestry was what everyone wish to have. It is reckoned for the item of the best gift. The royalty and nobility ordered and used custom-made tapestries. Sometimes the subject of motifs consisted of series which were deeply related to living 4) Decorative arts and crafts was the art that used materials such as precious metals jewels and others and that accorded with the luxurious and gorgeous taste of the royalty and nobility. Christian considered splendid and beautiful color of light as a symbol of glory. They used also for church appliances, There were metal crafts wood crafts textile crafts and others, As was stated above the costume appeared on the arts and crafts for living revealed the process of changes saw how the politic econ-omic and social organizations were developed.and social organizations were developed.

• Journal of Korean Neurosurgical Society
• /
• v.62 no.4
• /
• pp.376-381
• /
• 2019

Objective : To define optimal method that calculate the safe direction of cervical pedicle screw placement using computed tomography (CT) image based three dimensional (3D) cortical shell model of human cervical spine. Methods : Cortical shell model of cervical spine from C3 to C6 was made after segmentation of in vivo CT image data of 44 volunteers. Three dimensional Cartesian coordinate of all points constituting surface of whole vertebra, bilateral pedicle and posterior wall were acquired. The ideal trajectory of pedicle screw insertion was defined as viewing direction at which the inner area of pedicle become largest when we see through the biconcave tubular pedicle. The ideal trajectory of 352 pedicles (eight pedicles for each of 44 subjects) were calculated using custom made program and were changed from global coordinate to local coordinate according to the three dimensional position of posterior wall of each vertebral body. The transverse and sagittal angle of trajectory were defined as the angle between ideal trajectory line and perpendicular line of posterior wall in the horizontal and sagittal plane. The averages and standard deviations of all measurements were calculated. Results : The average transverse angles were $50.60^{\circ}{\pm}6.22^{\circ}$ at C3, $51.42^{\circ}{\pm}7.44^{\circ}$ at C4, $47.79^{\circ}{\pm}7.61^{\circ}$ at C5, and $41.24^{\circ}{\pm}7.76^{\circ}$ at C6. The transverse angle becomes more steep from C3 to C6. The mean sagittal angles were $9.72^{\circ}{\pm}6.73^{\circ}$ downward at C3, $5.09^{\circ}{\pm}6.39^{\circ}$ downward at C4, $0.08^{\circ}{\pm}6.06^{\circ}$ downward at C5, and $1.67^{\circ}{\pm}6.06^{\circ}$ upward at C6. The sagittal angle changes from caudad to cephalad from C3 to C6. Conclusion : The absolute values of transverse and sagittal angle in our study were not same but the trend of changes were similar to previous studies. Because we know 3D address of all points constituting cortical shell of cervical vertebrae. we can easily reconstruct 3D model and manage it freely using computer program. More creative measurement of morphological characteristics could be carried out than direct inspection of raw bone. Furthermore this concept of measurement could be used for the computing program of automated robotic screw insertion.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.1
• /
• pp.83-92
• /
• 2014

This study has researched the uses and plant materials of bamboo screen from the gardening books in Ming Dynasty: Yuanye (園冶), Zhang wu ji (長物志) and Xian Qing Ou Ji (閑情偶寄). The results were as follows; first, though these books nearly were written nearly at the same period, the bamboo screen was seen in a negative viewpoint or positively endorsed by authors. These show the extinctive process which had used bamboo screen creating for urban seclusion in early Ming Dynasty and that the meaning was changed by the social economic changes in Late Ming Dynasty. Second, the bamboo screen was devised as a support which was trained the branches of the creepers. This was an equipment to maximize ornamental effectiveness with some rose families which produced nearly all year round, and it was involved cultural enjoyment of Chinese indigenous custom. Finally, the bamboo screen was used rose families for the beautiful flowers. And this was constructed as a multipurpose facility which was used as the flower screen in blossoming season as well as the role as wall.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.2059-2066
• /
• 2018

This study explored the feasibility of utilizing an SWCNT-coated fabric sensor for the development of a wearable motion sensing device. The extent of variation in electric resistance of the sensor material was evaluated by varying the fiber composition of the SWCNT-coated base fabrics, attachment methods, number of layers, and sensor width and length. 32 sensors were fabricated by employing different combinations of these variables. Using a custom-built experimental jig, the amount of voltage change in a fabric sensor as a function of the length was measured as the fabric sensors underwent loading-unloading test with induced strains of 30 %, 40 %, and 50 % at a frequency of 0.5 Hz. First-step analysis revealed the following: characteristics of the strain-voltage curves of the fabric sensors confirmed that 14 out of 32 sensors were evaluated as more suitable for measuring human joint movement, as they yield stable resistance values under tension-release conditions; furthermore, significantly stable resistance values were observed at each level of strain. Secondly, we analyzed the averaged maximum, minimum, and standard deviations at various strain levels. From this analysis, it was determined that the two-layer sensor structure and welding attachment method contributed to the improvement of sensing accuracy.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.353-360
• /
• 2022

Due to the dense and complicated working environment, the construction industry is susceptible to many accidents. Worker's fall is a severe problem at the construction site, including falling into holes or openings because of the inadequate coverings as per the safety rules. During the construction or demolition of a building, openings and holes are formed in the floors and roofs. Many workers neglect to cover openings for ease of work while being aware of the risks of holes, openings, and gaps at heights. However, there are safety rules for worker safety; the holes and openings must be covered to prevent falls. The safety inspector typically examines it by visiting the construction site, which is time-consuming and requires safety manager efforts. Therefore, this study presented a worker-driven approach (the worker is involved in the reporting process) to facilitate safety managers by developing integrated computer vision and inertia sensors-based mobile applications to identify openings. The TensorFlow framework is used to design Convolutional Neural Network (CNN); the designed CNN is trained on a custom dataset for binary class openings and covered and deployed on an android smartphone. When an application captures an image, the device also extracts the accelerometer values to determine the inclination in parallel with the classification task of the device to predict the final output as floor (openings/ covered), wall (openings/covered), and roof (openings / covered). The proposed worker-driven approach will be extended with other case scenarios at the construction site.

• Journal of the Korean Society of Costume
• /
• v.22
• /
• pp.159-176
• /
• 1994

This study's purpose is to find the ancient costume of the folk song's words on Dunhuang manuscripts in the background wass-carvings sculptures and several art works. Dunhuang had played the part of major route between ancient China and Europe. It is located on kam-suksong the west of China. 1. In the aspect of costume arrangement hair Styling is represented by Naegagyo, Wangyesa, Kyongburak, Bonkwyun, Pogurak, Chonsonja, Namgaja, Tongson-ga, Ojesa, Chanboja in Dunhuang manuscripts. tugue is sim-ilar to Sabyokkwanja in Naegagyo as of that time these kinds of Kwan-ja was very popular. It was told that emperor's wife concubine and maid of honor would wear kwnaja favorably. And the kinds of Tugeu is PuyongKwyunkye, Aangunkye, Chunkye from Kyuwanjon except Sangunkye, Ounkye in Dunhuangsa. 2. Jangdaegy is guoted from Kyuw-anjon -A series of the chinese history book-tells us about women's make-up . The narmes of make-up are Hongjang Unjan--g, Yiljang chwejang, Tam-ajang Murgjang, Sanagjang, Light-make up are referred in Naegagyo is included as packjang Besides we can find other make-up skills Huphwaro and Rujang from the Kaewonch onbon-wisa which was Yangkwibi's episodes. We can find the a corpus of song's words about cosmetic custom in Kor-ea. Which is 'Haecho' folk song in the souther-en costal regions 'Jinggum' folk song in Kim-hae regions and so on.... It's words is similar to Dunhuangsa in China. 3. Bichun inherited to China with India Bud-dism art in the middle of Dunhuang wall-pain-tings is one of the important Buddist saint. Sometimes it is painted with Giakchun Its arms of fly-dnacing in heaven with colored belt on body has almost the form of play on the musical instrument, We can see seasily the form in the painting of Buddist ser-mon. It was progressed and changed with the background of chinese traditional culture. When Dang's period came the color was chan-ged lighting dark blue has rhythmical and viv-id power of life. 4. Among the corpus of song's words which express the singers' system and rites of their tradition or habits. Dunhuang manuscripts des-cribes on behalf of the folk song's words in tra-ditional costume. This is following: (1) Naegagyo o sabyokwanja o Chyrasam o Rashang (2) Wangyesa o Sokryugun o Costume for fisher man (3) Bungajang of the chanboja o Ajang (4) Pongkwyun o Chongui (5) Tongsongs o Junofore (6) Namgaja o thin-Rasam (7) Yuchungnang o Hongsam o Sokryugun : The color of red costume (8) Kyongburak o Hongrasam o Sokryugun : Costume for charming woman Therefore traditional costume could be extracted according to the Dunhuang folk song's words out of culture such as learning rit-es three-obedience four-virtues and in-struction. As the same time it reflects ancient China's characteristics directly. I would endeavor to development for the history of the costume furher creative design and participat-ed in research activity with concerns forward continuously.