• 한국광학회지
• /
• 제16권4호
• /
• pp.304-312
• /
• 2005

본 연구에서는 여러 형태의 회절광학요소의 field performance를 조사하였다. Zemax 프로그램을 이용하여 다섯 개의 회절광학요소, 즉 투과형 평면 DOE, 투과형 곡면 DOE, 반사형 포물면 DOE, 반사형 평면 DOE, 그리고 반사형 곡면 DOE를 설계하였다. 그리고 이들 회절광학요소에 극자외선 파장인 13 nm와 가시광선 파장인 632.8 nm를 적용시켰다. 이들 DOEs에 사입사 조명시의 회절 한계 하에서의 시야각의 크기 및 파장에 따른 특성, 그리고 주된 수차의 형태를 상호분석 비교하였다. 회절한계 하에서 투과 및 반사 형태 모두에서 곡면 DOEs의 시야각이 평면 DOEs의 시야각보다 훨씬 크다는 것을 알 수 있었다. 또한 사입사 경우에 평면 DOEs와 포물면경의 주된 수차는 코마이며, 곡면 DOEs의 주된 수차는 비점수차와 상면만곡의 혼합된 형태로 나타남을 알 수 있었다. 측정을 통하여 얻은 시야각의 크기와 수차의 종류가 이론적인 결과와 잘 일치함을 알 수 있었다. 또한 극자외선영역에서 평면형 DOEs에 비해 곡면형 DOEs의 field angle의 증가율이 가시광선에서보다 더 효과적임을 알 수 있었다.

• 대한기계학회논문집B
• /
• 제22권9호
• /
• pp.1325-1334
• /
• 1998

The objectives of the present study are to develop a systematic method rather than a conventional trial-and-error method for an optimal shape design using a mathematical theory, and to apply it to engineering problems. In the present study, an optimal condition for a minimum pressure loss in a two-dimensional curved duct flow is derived and then an optimal shape of the curved duct is designed from the optimal condition. In the design procedure, one needs to solve the adjoint Navier-Stokes equations which are derived from the Navier-Stokes equations and the cost function. Therefore, a computer code of solving both the Navier-Stokes and adjoint Navier-Stokes equations together with an automatic grid generation is developed. In a curved duct flow, flow separation occurs due to an adverse pressure gradient, resulting in an additional pressure loss. Optimal shapes of a curved duct are obtained at three different Reynolds numbers of 100, 300 and 800, respectively. In the optimally shaped curved ducts, the separation region does not exist or is significantly reduced, and thus the pressure loss along the curved duct is significantly reduced.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.750-755
• /
• 2005

This paper proposes a small VCM (Voice coil motor) type actuator using curved suspensions for auto-focusing and zoom motions for mobile information devices. 1'he proposed focusing actuator adopts a nontraditional type of suspension using curved beams in order to extend output displacement within small height restriction. The curved beam is similar to the leaf spring type which is usually used in optical disk drives. In addition, three different materials are considered for the curved suspension model, and Aluminum shows the best dynamic characteristics. The proposed zoom actuator does not use a suspension supporting bobbin but a moving rail and a sloper mechanism by generating rotational force at lens holder. The sensitivity of design parameters on output performance is studied using ANSYS (3D FEM tool). Experiments using a prototype of the proposed actuator model verified the analytical prediction and performance.

• 한국인터넷방송통신학회논문지
• /
• 제16권2호
• /
• pp.165-170
• /
• 2016

곡면형 플라즈마 도파로에 기초한 나노 크기의 전력분배기가 다중모드 간섭 결합기의 특성을 이용하여 설계되었다. 플라즈마 곡면형 다중모드 간섭 결합기(PC-MMIC)의 적응 특성을 쉽게 분석하기 위하여 등각변환 해석법을 이용하여 곡면형 구조를 평면형 구조로 등가 변환하였다. 또한, 3D 전송구조의 전파특성과 최적의 설계변수를 선택하기 위하여 유효 유전체 방법과 종방향 모드 전송 선로 해석법을 적용하였다. 설계된 $2{\times}2$ PC-MMIC는 휘어진 구조에 기인하여 quasi-TM 모드에서는 PC-MMIC의 특성이 나타내지 않았으며, quasi-TE 모드의 경우 50%:50%의 비율로 출력되는 3dB 결합특성이 나타나지 않았다. 더욱이, 곡률 반경이 작은 부분 보다 큰 부분에서 입사된 신호가 더욱 좋은 결합특성을 나타내었다.

• Steel and Composite Structures
• /
• 제38권5호
• /
• pp.477-496
• /
• 2021

The main objective of this paper is to study vibration of sandwich open cylindrical panel with damaged core and FG face sheets based on three-dimensional theory of elasticity. The structures are made of a damaged isotropic core and two external face sheets. These skins are strengthened at the nanoscale level by randomly oriented Carbon nanotubes (CNTs) and are reinforced at the microscale stage by oriented straight fibers. These reinforcing phases are included in a polymer matrix and a three-phase approach based on the Eshelby-Mori-Tanaka scheme and on the Halpin-Tsai approach, which is developed to compute the overall mechanical properties of the composite material. Three complicated equations of motion for the panel under consideration are semi-analytically solved by using 2-D differential quadrature method. Several parametric analyses are carried out to investigate the mechanical behavior of these multi-layered structures depending on the damage features, through-the-thickness distribution and boundary conditions. It is seen that for the large amount of power-law index "P", increasing this parameter does not have significant effect on the non-dimensional natural frequency parameters of the FG sandwich curved panel. Results indicate that by increasing the value of isotropic damage parameter "D" up to the unity (fully damaged core) the frequency would tend to become zero. One can dictate the fiber variation profile through the radial direction of the sandwich panel via the amount of "P", "b" and "c" parameters. It should be noticed that with increase of volume fraction of fibers, the frequency parameter of the panels does not increase necessarily, so by considering suitable amounts of power-law index "P" and the parameters "b" and "c", one can get dynamic characteristics similar or better than the isotropic limit case for laminated FG curved panels.

• 대한기계학회논문집B
• /
• 제25권10호
• /
• pp.1293-1302
• /
• 2001

It is generally known that radial vane blowers with vaneless diffuser may generate mostly only a rotating stall but backward curved vane blowers may do both an impeller and a diffuser rotating stalls. In this study, it was found from the numerical and experimental results that the diffuser rotating stall does not appear in a radial vane because of the suppression for the diffuser stall appearance by occurring of impeller rotating stall in a large flow rate coefficient. The diffuser rotating stalls occurring when the width of diffuser is broaden fur a backward curved vane blower are classified definitely by the diffuser flow rate coefficient defined by adopting the varying diffuser width.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.414-418
• /
• 2005

A finite element model is developed for the numerical simulation of bed elevation change in a curved channel. The SU/PG (Streamline-Upwind/Petrov-Galerkin) method is used to solve 2D shallow water equations and the BG (Bubnov-Galerkin) method is used for the Exner equation. For the time derivative terms, the Crank-Nicolson scheme is used. The developed model is a decoupled model in a sense that the bed elevation does not change simultaneously with the flow during the computational time step. The total load formula with is used for the sediment transport model. The slip conditions are described along the lateral boundaries. The effects of gravity force due to geometry change and the secondary flows in a curved channel are considered in the model. For the verification, the model is applied to two laboratory experiments. The first is $140^{\circ}$ bended channel data at Delft Hydraulics Laboratory and the second is $140^{\circ}$ bended channel data at Laboratory of Fluid Mechanics of the Delft University of Technology. The finite element grid is constructed with linear quadrilateral elements. It is found that the computed results are in good agreement with measured data, showing a point bar at the inner bank and a pool at the outer bank.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.498-501
• /
• 2006

R.C. Rahmen bridges have been widely constructed in the location of interchange or narrow road crossing. In addition, skewed or curved rahmen bridges are mostly constructed in comparison with normal rahmen bridges for the purpose of maintaining the route of road or considering the beauty of bridge. However, due to the functional characteristics, rahmen bridges are sustained under the direct vehicle loads and the side directional earth pressure so that the stress concentration with respect to the geometrical eccentricity can be occurred if rahmen bridges are constructed in large amount of skew. In this investigation, the behavior of skewed rahmen bridges which is located in curved route has been analysed to investigate the additional effects on the change of stress concentration. As a result, it is judged that the stress of curved rahmen bridges is more concentrated than the stress of straight rahmen bridges in the region of obtuse angle. However, in the middle of slab, the curve does not affect on the stress concentration.

• 대한토목학회논문집
• /
• 제26권4A호
• /
• pp.735-742
• /
• 2006

실 설계에서 적용되는 강곡선 플레이트거더교의 기하학적인 설계범위 내에서 횡방향변형이 충분히 지지된 강곡선 플레이트거더 복부판의 극한전단강도는 비록 직선복부판에 비해 후좌굴강도는 감소할지라도 탄성좌굴강도가 상대적으로 증가한다. 또한 강곡선 플레이트거더 복부판의 극한전단강도는 후좌굴강도를 포함한 직선플레이트거더 복부판의 극한전단강도와 같은 크기를 발현하고 있음이 여러 연구를 통해서 입증되었다. 본 연구에서는 강곡선 플레이트거더 복부판이 극한전단강도를 발현하기 위한 중간수직보강재의 소요강성에 관한 수치해석연구를 수행하였다. 수치해석결과로부터 후좌굴거동이 존재하는 강곡 선플레이트거더 복부판이 후좌굴강도를 충분히 발현하기 위해서는 현행 Guide Specifications(AASHTO, 2003)의 중간수직보강재 강성이 후좌굴거동 시에 단순지지역할을 하기에는 부족한 것으로 조사되었으며, 이를 기초로 전단좌굴강도비에 따른 소요강성식을 제안하였다.

• Restorative Dentistry and Endodontics
• /
• 제47권2호
• /
• pp.22.1-22.18
• /
• 2022

Objectives: This systematic review (register-osf.io/wg7ba) compared the efficacy and safety of rotary and reciprocating kinematics in the removal of filling material from curved root canals. Materials and Methods: Only in vitro studies evaluating both kinematics during retreatment were included. A systematic search (PubMed/MEDLINE, Scopus, and other databases, until January 2021), data extraction, and risk of bias analysis (Joanna Briggs Institute checklist) were performed. Efficacy in filling removal was the primary outcome. Results: The search resulted in 2,795 studies, of which 15 were included. Efficacy was measured in terms of the remaining filling material and the time required for this. Nine studies evaluated filling material removal, of which 7 found no significant differences between rotary and reciprocating kinematics. Regarding the time for filling removal, 5 studies showed no difference between both kinematics, 2 studies showed faster results with rotary systems, and other 2 showed the opposite. No significant differences were found in apical transportation, centering ability, instrument failure, dentin removed and extruded debris. A low risk of bias was observed. Conclusions: This review suggests that the choice of rotary or reciprocating kinematics does not influence the efficacy of filling removal from curved root canals. Further studies are needed to compare the kinematics safety in curved root canals.