• 대한가정학회지
• /
• 제12권34호
• /
• pp.663-677
• /
• 1974

The social and psychological approaches to clothing researches by Fluge,l, Hurlock and Barr in the early 1930's have since been developed greatly. It has now been generally agreed that clothing is the symbol of one's personality and social status, for clothing is regarded as the second skin and a manifestation of one's emotional states as well. Based on this consensus, this study was intended to observe the possible relationship between one's clothing design preference-in line, color and texture- and interest. For this survey, 200 college woman students from four universities were selected at random, and an interest-test standardized by prof. Jung Bum Mo and a questionaire made of 20 items on the clothing prferences were given. The results as commputerized and analyzed are as follows : 1. Line Preference a) Structural line : It is quite obvious that those like straight line are interested in fine arts, and curved line in physics. b) Out-line : Among tubular, bell and bustle of the silhouette, those like the bustle have shown particular interest in music, and the tubular in politics and business. c) Style : There is a salient tendency that those like a dressy style are much interested in music, and casual style in physics and physical exercise. 2. Color Preference a) Favorite color : Those like red, orange and yellow show a high interest in artistic activities and physical exercise, and black, grey and white in politics. b) Variety and combination of color ; These have shown no relationship to the interest. 3. Texture Preference a) The touch : Those like the texture with the feeling the crisp and rough are interested in fine arts, and of soft and smooth in the field of social service. b) Fabric surface : Those like naturalistic pattern, i.e. print of flowers, show much interest in music and literature, and plain fabrics in physical exercise.

• Parasites, Hosts and Diseases
• /
• 제49권3호
• /
• pp.317-321
• /
• 2011

Adult gnathostomes were discovered in the stomach of the Jeju weasel, Mustela sibilica quelpartis, road-killed in Jeju-do (Province). Their morphological characters were examined to identify the species. Total 50 gnathostome adults were collected from 6 out of 10 weasels examined. In infected weasels, 4-6 worms were grouped and embedded in each granulomatous gastric tumor, except 1 weasel. Male worms were $25.0{\times}1.4$ mm in average size, and had a tail with pedunculate papillae, a spicule, and minute tegumental spines. Females were $40.0{\times}2.5$mm in average size, and had a tail without tegumental spines. Pointed and posteriorly curved hooklets were arranged in 8-10 rows on the head bulb. Tegumental spines were distributed from behind the head bulb to the middle portion of the body. The spines were different in size and shape by the distribution level of the body surface. Fertilized eggs were $65.5{\times}38.9\;{\mu}m$ in average size, and had a mucoid plug at 1 pole. These gnathostomes from Jeju weasels were identified as Gnathostoma nipponicum Yamaguti, 1941. By the present study, it was confirmed for the first time that G. nipponicum is distributed in Jeju-do, the Republic of Korea, and the Jeju weasel, M. sibilica quelpartis, plays a crucial role for its definitive host.

• 한국결정성장학회지
• /
• 제31권5호
• /
• pp.212-217
• /
• 2021

Silica sol에 YAG 형광체를 첨가량별로 spin 코팅 후, 코팅막의 blue LED에서 백색광이 발현되는 정도와 표면 및 곡면 코팅용 binder로써, 적용가능성을 확인하였다. SEM, PSA를 통해YAG의 입자 크기는 D₅₀: 9~10 ㎛ 내외이며, XRD를 통해 YAG의 결정구조가 garnet(Y₃Al₅O₁₂), cubic인 것을 확인하였다. 코팅막은 crack이 없고 동시에 silica sol이YAG 형광체를 균질하게 도포된 형상을 보였으며, 첨가량 증가와 비례하게 코팅막 내에서 YAG 첨가량과 두께는 최대 40 ㎛까지 증가하는 추세를 보였다. 그리고 YAG 첨가량이 증가할수록 PL emission intensity 증가와 chromatic locus 곡선 끝 방향으로 색좌표 이동을 확인하였다. Soda-lime 유리기판 표면에 코팅 후, crack이 없으며 YAG 형광체가 균질하게 도포된 코팅성과 코팅막의 백색광 발현특성을 확인할 수 있었고 이는 직접적으로 LED에 다양한 형태의 형광 형상의 구현이 가능하다는 것을 의미한다.

• 대한조선학회논문집
• /
• 제58권5호
• /
• pp.303-313
• /
• 2021

Recently, quality control of the Liquefied Natural Gas Carrier (LNGC) cargo hold and block-erection interference areas using 3D scanners have been performed, focusing on large shipyards and the international association of classification societies. In this study, as a part of the research on LNGC cargo hold quality management advancement, a study on deep-learning-based scaffolding system 3D point cloud object detection and post-processing were conducted using a LNGC cargo hold 3D point cloud. The scaffolding system point cloud object detection is based on the PointNet deep learning architecture that detects objects using point clouds, achieving 70% prediction accuracy. In addition, the possibility of improving the accuracy of object detection through parameter adjustment is confirmed, and the standard of Intersection over Union (IoU), an index for determining whether the object is the same, is achieved. To avoid the manual post-processing work, the object detection architecture allows automatic task performance and can achieve stable prediction accuracy through supplementation and improvement of learning data. In the future, an improved study will be conducted on not only the flat surface of the LNGC cargo hold but also complex systems such as curved surfaces, and the results are expected to be applicable in process progress automation rate monitoring and ship quality control.

• 보존과학회지
• /
• 제36권6호
• /
• pp.483-493
• /
• 2020

X-선을 이용한 비파괴 조사와, 현미경 조사를 통해 고려 나전국화넝쿨무늬합(고려나전합)의 구조와 제작기법을 확인하고, 보존상태를 파악하였다. 조사결과, 고려 나전국화넝쿨무늬합은 침엽수재를 바탕재료로 사용하였으며, 목재 위에는 직물을 바른 뒤에 옻칠을 한 것으로 확인되었다. 합의 구조는 판재를 반화형으로 가공한 뒤에 측면에 목재를 덧붙여서 제작하였고, 측벽으로 사용한 부재는 일정한 간격으로 칼집을 내어서 곡선형으로 가공하기 용이하게 만든 것으로 확인되었다. 나전의 가공은 주름질을 사용하였으며, 대모장식에는 복채기법이 사용되었다. 금속선은 단선과 착선이 사용되었다.

• 건축역사연구
• /
• 제31권6호
• /
• pp.59-68
• /
• 2022

This paper is an architectural historical study on Chimi of Hwangnyongsa Temple. In this research, the shape and cross-section of the chimi are reviewed. The results of the study are as follows. The chimi is a form in which the head part facing the maru is omitted, and the upper and lower body are separated. The upper and lower bonds are assembled into a two types of joint throughout the side of the torso, and then bound with an iron strap. Because of the absence of ridge line in the front, and the narrow curved surface which makes the side plate close to the plane, the entire cross-section is triangular, and the rear plate maintains the shape of the chimi. The naerimmaru connected to the side of the chimi has a slope, so it is clear that the chimi was used on the woojingak-jibung(hipped-roof), and the wing part and back of the chimi are erected on the side roof. The height of the yongmaru and chunyeomaru is about the same and the roofing tiles of those are in contact. The roofing tiles of chunyemaru should be cut to fit the angle of the contacting part. The maru is 30 stories high of roofing tiles as a result of the on-board survey. Based on reference on the shape and timing of the production of chimi, the height of chimi, and the maru is believed to have been built before the Unified Silla Period and used in buildings with at least seven-kan frontage. Buildings corresponding to these construction conditions can be seen as Central hall and East hall in Hwangnyongsa temple.

• Current Optics and Photonics
• /
• 제6권2호
• /
• pp.202-211
• /
• 2022

In the pasteurization of escalator handrails using ultraviolet (UV) sterilizers, a combination of light distribution and escalator speed has priority over other important factors. Furthermore, since part of the escalator handrail has a curved structure, proper design is needed to improve the sterilization rate on the surfaces touched by users. In this paper, two types of sterilizers satisfying these conditions are manufactured with 275-nm UV-C LEDs, after modeling the three-dimensional (3D) structure of an escalator handrail and simulating optical distributions of UV-C irradiation on the handrail's surface according to light-emitting diode (LED) positions and reflector variations in the sterilizers. Pasteurization experiments with the UV-C LED sterilizers are conducted on six types of gram-positive and gram-negative bacteria, with exposure times of 0.2, 5, and 15 s at an actual installation distance of 20 mm. The sterilization rates for the gram-positive bacteria are 10.63% to 27.94% at 0.2 s, 89.44% to 96.30% at 5 s, and 99.64% to 99.88% at 15 s. Those for the gram-negative bacteria are 57.70% to 77.63% at 0.2 s, 98.90% to 99.49% at 5 s, and 99.88% to 99.99% at 15 s. The power consumption of the UV-C LED sterilizer is about 8 W, which can be supplied by a self-generation module instead of an external power supply.

• 한국지반환경공학회 논문집
• /
• 제24권1호
• /
• pp.37-44
• /
• 2023

본 연구에서는 도로의 건설 시간 및 유지관리 비용을 단축하기 위하여 제안된 지속가능한 장수명 모듈러 도로시스템의 하부구조인 지지 모듈러의 성능을 평가하였다. 하부 곡선면을 가진 Cross-Beam 형태의 지지 모듈러 4개로 구성된 모듈러 도로시스템을 Test-bed에 시공하였다. 6개의 하중계와 8개의 변위계를 중앙부 2개 Cross-Beam 형태의 지지 모듈러에 설치하였다. 2개의 하중, 50kN, 100kN을 도로 포장슬래브 15개 지점에 재하하여 모듈러 도로시스템에서 발생하는 하중 및 변위를 측정하였다. 측정된 변위들은 1mm 미만으로 실제 도로의 안정성에 문제가 없을 것으로 판단된다. 현장실험에서 적용된 2개의 재하 하중들과 측정된 하중값들을 비교해 보았을 때 하부 지반에 전달되는 하중은 매우 작은 것으로 판단된다. 지지 모듈러를 가진 모듈러 도로 시스템을 실제 도로현장에 적용 가능한 것으로 판단된다.

• Design & Manufacturing
• /
• 제17권3호
• /
• pp.15-20
• /
• 2023

In the fine blanking process, which is a press operation known for producing parts with narrow clearances and high precision through the application of high pressure, die roll often occurs during the shearing process when the punch penetrates the material. This die roll phenomenon can significantly reduce the functional surface of the parts, leading to decreased product performance, strength, and fatigue life. In this research, we conducted an in-depth analysis of the factors influencing die roll in the curvature area of the fine blanking process and identified its root causes. Subsequently, we designed and experimentally verified a die roll reduction process specifically tailored for the door latch manufacturing process. Our findings indicate that die roll tends to increase as the curvature radius decreases, primarily due to the heightened bending moment resulting from reduced shape width-length. Additionally, die roll is triggered by the absorption of initial punch energy by scrap material during the early shearing phase, resulting in lower speed compared to the product area. To mitigate the occurrence of die roll, we strategically selected the Shaving process and carefully determined the shaving direction and clearance area length. Our experiments demonstrated a promising trend of up to 75% reduction in die roll when applying the Shaving process in the opposite direction of pre-cutting, with the minimum die roll observed at a clearance area length of 0.2 mm. Furthermore, we successfully implemented this approach in the production of door latch products, confirming a significant reduction in die roll. This research contributes valuable insights and practical solutions for addressing die roll issues in fine blanking processes.

• Radiation Oncology Journal
• /
• 제27권2호
• /
• pp.103-110
• /
• 2009

목 적: 피부와 같이 표면이 넓고 굴곡이 있는 부분을 치료할 때 토모테라피의 유용성과 치료 계획에서 계산된 표면 조사량의 정확성을 알아보고자 하였다. 대상 및 방법: 실린더 모양의 치즈 팬텀을 이용하여 2가지의 치료 계획을 세웠다. 첫 번째 계획은 표면에서 1 cm 깊이까지 고리 모양의 치료 부위를 설정하고, 여기에 2 Gy의 선량을 처방하였다. 다른 계획은 표면에서 5 mm 바깥쪽부터 1 cm 깊이까지 고리 모양의 치료 부위를 설정하고, 여기에 2 Gy의 선량을 처방하였다. 표면에서 2 cm 밑의 안쪽 부분은 차폐하여 방사선이 직접 들어가지 않도록 하였다. 표면 선량과 깊이에 따른 선량 분포를 측정하기 위하여, EDR2 필름을 팬텀 안에 넣었으며, TLD 칩 6개를 표면에 부착하였다. 결 과: 필름을 분석한 결과, 표면 선량은 첫 번째 계획에서 118.7 cGy였고 두 번째 계획에서 130.9 cGy였다. TLD 칩을 분석한 결과, 필름에 비하여 표면 선량이 높게 나왔는데 이것은 TLD 칩의 두께로 인한 것으로 생각된다. 처방 선량의 95%에 다다르는 깊이는 첫 번째 계획의 경우 2.1 mm, 두 번째 계획의 경우 2.2 mm였다. 최대 선량은 처방 선량의 110%였다. 표면에서 깊어질수록, 선량은 빠르게 감소하였고, 표면에서 2 cm 깊이에서는 처방 선량의 20%만 측정되었다. 결 론: 토모테라피는 피부와 같은 넓고 굴곡진 부위를 치료하는데 유용하다. 하지만 표면에서 2 mm 깊이 이내의 경우 실제 선량이 계획된 선량보다 적게 나타나기 때문에, 이 깊이보다 얕게 위치한 부위를 치료할 경우에는 보상체가 필요하다.