• 한국콘텐츠학회논문지
• /
• 제17권10호
• /
• pp.636-646
• /
• 2017

본 논문은 전통적인 도예기법을 응용하여 새로운 기법을 창안하는데 목적을 둔다. 말하자면 가장 핵심적인 새로운 방법은 체바퀴 타래기법의 토레미판위에 여러 형태의 문양을 압인한 덧살(weld 새롭게 창안한 용어)을 이용하여 물레 위에 소지(역자 주--흙)로 만든 원통에 붙여서 최초로 전기물레의 빠른 회전에 의해 안에서 밖으로 밀어내어 기존 기벽 문양의 자유로운 해체와 왜곡된 문양을 표현하여 미적 아름다움을 극대화하는 컨셉이다. 이러한 미학소스의 주요 관점은 도자기 표면의 대부분 구형태의 곡면인데 마치 지구본에 그려진 지표처럼 왜곡되어 보이는 현상이 일어나는데, 늘려 찌그러진 형태와 왜곡된 문양의 자유로운 표현 해체를 통해 다이나믹하고 역동적이면서 해학적인 표현 기법을 창안하게 되었는데 이 기법을 수레질 압인 덧살 기벽 물레 늘림 기법(bating sealing weld outer wall extension technique)이라고 정하였다.

• 한국항공우주학회지
• /
• 제38권4호
• /
• pp.376-381
• /
• 2010

일반적으로 기체 구조물 개발시 운용조건에서의 구조설계 해석 검증 및 구조강도확인을 위해서 구조강도시험이 수행된다. 본 논문에서는 구조시험 하중부가방법 중 응력집중에 의해 파손되기 쉬운 재료를 기체 지지구조로 사용하고자 할 때 구조물 표면에 공기압을 이용하여 국부적 응력집중을 피하면서 분포하중을 부가할 수 있는 새로운 외력부가장치의 개발에 대하여 기술하였다. 본 장치는 부드러운 재질의 하중전달용 매개체를 이용하여 구조물 표면에 손상을 주지 않고 외력을 전달할 수 있으며, 임의형상 구조물에 대하여 쉽게 응용이 가능하다. 본 장치를 이용하여 평판구조물과 곡면구조물에 대하여 외력부가구조강도시험을 성공적으로 수행함으로써 적용시험기법의 타당성을 입증하였다.

• 대한가정학회지
• /
• 제20권3호
• /
• pp.9-18
• /
• 1982

In this study, we attempted to make an original pattern of clothing for an abnormal type of figure, especially for the type of kyphosis. We measured the curvature of the spine of a woman with kyphosis with a Martin measuring instrument and a silhouetter in the following ways. First, we counted the rate of shrinkage of the standard lines drawn on the surface of the body according as the body moved. Secondly, placing the front and back darts, the front and back shoulder darts and the side darts according to“Munhwa”pattern, we made cubic cuttings of four moving postures as well as the standing one. Thirdly, we superposed the developed patterns of the standing and the moving postures, measuring the position change and the amount of the chaange of the darts, and compared them. The results are as follows: 1) In the developed pattern of a cubic cutting of the basic pattern and the standing posture, the neckhole became larger than that of the basic pattern, and the waist line was lowered than that of the basic pattern because the center back line was shortened due to the curved backbone. 2) As for the change of the standard line according to the movement, we found that the waist line, the center front line, the center back line, the bust width line, the upper back width line and the back width line became longer. Special consideration must be given to the function of the clothing for an abnormal type of figure. 3) The difference of the measurements between the cubic cutting and the body measurement regardless of the body movement is due to a gap by an acute angle at the jutted place between the developed pattern and the body surface. We found that the body measurement of the upper back width line, the back width line and the bust line became larger. Consequently, in making an original clothing pattern, it is desirable that we must not place the front and the back waist darts at the jutted place on the back from the functional and the aesthetic viewpoint of clothing. It is also desirable that we must widen the neckhole because the shoulder angle is close to a straight line due to a jut of the upper back width line.

• Composites Research
• /
• 제12권6호
• /
• pp.53-64
• /
• 1999

LCP원섬유(fibril)와 폴리아미드6 (PA6)수지로 사출성형된 복합재료 박판(molded thin composite plaques)의 미세구조와 굽힘강도에 대한 에폭시수지 함유율의 효과를 살펴보았다. 성형은 LCP원섬유의 용융점 이하에서 하였으며 이렇게 만들어진 판재는 횡방향 배향을 보이는 두께 $65-120{\mu\textrm{m}}$의 표피층(surface skin layer), 유동방향과 거의 일치하는 배향을 보이는 표피아래층(sub-skin layer), 아크형 곡선유동형태를 보이는 심층(core layer)으로 구성되어 있었다. 에폭시함유율이 달라도 각 층의 미세구조방향은 유사하였으나 에폭시함유율이 증가함에 따라 LCP영역(domain)이 원섬유상에서 층상구조로 변했고 거시적 파괴진로(fracture path)는 인장형에서 전단형으로 바뀌었다. 또한 에폭시 4.8vol%에서 가장 우수한 굽힘강도와 파단변형율을 보였다. 굽힘강도를 수치해석한 결과 에폭시성분을 복합재에 부가하면 각 층의 두께와 미세구조 같은 기하학적인 형태가 변하면서 각 층 자체의 탄성계수와 강도가 열등화 되었음을 알았다.

• 한국의류산업학회지
• /
• 제10권5호
• /
• pp.652-659
• /
• 2008

This study was designed to testify the possibility and devise the method to manipulate the 3D body scan data to produce rounded-belt pattern adaptable to hip-type variation of women in their 20's. The results of this research were as follows : Firstly, based on drop-value distribution of hip and waist girth, 151 subjects were classified into three hip-types; Type 1 (15.23%) was 'cylinder type', showing lowest drop-value, Type 2 (69.54%) was 'average type' and Type3 (15.23%) was 'hourglass type' showing highest drop-value. Secondly, using CAD program, design lines for round shape belt were set on the surface of 3D scan data of representative subject of each type. And divided 3D surfaces were flattened onto the plane by the internal tools of CAD program. The measure, 'lifting value of round belt pattern', implying the level of curve ratio of pattern was higher in back than front. This result might be linked to the fact that the hip part is more protruded than the abdomen part. And the measures also showed highest values in Type 3(hourglass type) and lowest in Type 1(cylinder type), meaning that the pattern of Type 3 showed more rounded shape than that of Type 1. This finding implied that round belt for body type having high drop-value should be shaped more curved. Thirdly, difference ratios of outline length and area between 3D curves(body surface) and 2D plane(pattern) were 4.5% and 1.3%, respectively. This result demonstrated and solidified the feasibility of designing digital garment pattern from 3D body scan data.

• 전기전자학회논문지
• /
• 제24권2호
• /
• pp.626-631
• /
• 2020

본 논문에서는 컨포멀 어레이(Conformal Array) 빔 합성 기법에 관한 연구를 수행하였다. 일반적인 선형 배열에서의 빔 조향에 따른 성능 열화 없이 빔 조향을 수행할 수 있는 컨포멀 어레이는 다양한 레이다 시스템에 적용되고 있다. 평면형 선형 배열에서의 빔 합성 기법과 달리 컨포멀 배열은 곡면상에 복사소자가 위치하므로 복사소자별로 파면(Wave Front)까지의 위상을 보상해 주어야 한다. 또한 복사소자별 옵셋 각도(Offset Angle)를 계산하여 실제 q빔 합성 시 적용함으로서 정확한 빔 패턴을 예측할 수 있었다. 본 논문에서는 위상 보상 및 옵셋 각도를 계산하여 빔 패턴 합성 시 적용한 후 빔 패턴 비교를 수행하였으며, 수학적인 분석을 통해 성능을 비교하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.43-46
• /
• 2010

As the nuclear power plant has been constructed continuously for several decades in Korea, the welding technology for components manufacturing and installation has been improved largely. Standardization for weld test and qualification was also established systematically according to the concerned code. The welding for the main components requires the high reliability to keep the constant quality level, which means the repeatability of weld quality. Therefore the weld process qualified by thorough test and evaluation is able to be applied for manufacturing. Narrow gap SAW and GTAW process are usually applied for girth seam welding of pressure vessel like Reactor vessel, steam generator, and etc. For the surface cladding with stainless steel and Inconel material, strip welding process is mainly used. Inside cladding of nozzles is additionally applied with Hot wire GTAW and semi-auto welding process. Especially the weld joint having elliptical weld line on curved surface needs a specialized weld system which is automatically rotating with adjusting position of the head torch. The small sized pipe, tube, and internal parts of reactor vessel requests precise weld processes like an automatic GTAW and electron beam welding. Welding of dissimilar materials including Inconel690 material has high possibility of weld defects like a lack of fusion, various types of crack. To avoid these kinds of problem, optimum weld parameters and sequence should be set up through the many tests. As the life extension of nuclear power plant is general trend, weld technologies having higher reliability is required gradually. More development of specialized welding systems, weld part analysis and evaluation, and life prediction for main components should be taken into a consideration extensively.

• 한국정보과학회논문지:시스템및이론
• /
• 제27권4호
• /
• pp.353-361
• /
• 2000

컴퓨터 그래픽스에서 모델링 요소를 선택하는 것은 사실적인 이미지를 실시간에 생성하는데 중요한 영향을 미친다. 특히 부정형 물체를 모델링하는데 있어서 적은 양의 데이타, 용이한 렌더링 및 확장성은 모델링 요소의 중요한 선택 기준이 된다. 음함수 곡면을 표현하는 많은 모델링 방법들 중 하나인 메타볼 모델은 적은 양의 데이타로 복잡한 곡면을 모델링할 수 있다는 장점을 갖는다. 그러나 곡면이 아닌 육면체와 같은 평면으로 구성되는 물체를 메타볼로 모델링하게 되면 다각형으로 모델링하는 것보다 더 많은 수의 데이타량을 요구하게 된다. 본 논문은 메타볼의 장점을 수용하면서 적은 수의 데이타로 평면형태의 물체까지 모델링할 수 있는 메타볼의 확장 형태인 메타큐브를 제안한다. 메타큐브는 두 개의 매개 변수 값에 의해 구에서 정육면체까지 자유로운 확장이 가능하므로 적은 수의 데이타로 곡면과 평면이 혼합된 물체를 쉽게 모델링할 수 있다.

• International Journal of Korean Welding Society
• /
• 제1권1호
• /
• pp.58-62
• /
• 2001

The surface of AC8A Ah alloy was modified by adding the Cu powder using a Plasma Transferred Arc (PTA) welding process. Under the optimum fabricating conditions, the modified surface of AC8A Ah alloy was observed to possess the sound microstructure with a minimum porosity. Hardness and wear resistance properties of the as-fabricated alloy were compared with those of the 76 heat-treated one. In case of the as-fabricated alloy, the hardness of the modified layer was twice that of the matrix region. Although significant increase in the hardness of the matrix region was observed after T6 heat treatment, the hardness of the modified layer was not observed to change. The wear resistance of the modified layer was significantly increased compared to that of the matrix region. The microstructure of a weld zone and the matrix region were investigated using the optical microscope, scanning electron microscope (SEM), electron probe microanalysis (EPMA), and transmission electron microscope (TEM). The primary and eutectic silicon in the weld zone were finer and more curved than in the matrix region, while some precipitates has had been found therein. According to the TEM observation, the predominant precipitate present in the weld zone was the $\theta$'phase, which is precipitated during cooling by rapid solidification in PTA welding process. Improvement of hardness and wear properties in the weld zone in the as-fabricated condition can be explained based on the presence of $\theta$’precipitates and fine primary and eutectic silicon distribution.

• 천문학회지
• /
• 제48권2호
• /
• pp.155-164
• /
• 2015

In Kang (2015) we calculated the acceleration of cosmic-ray electrons at weak spherical shocks that are expected to form in the cluster outskirts, and estimated the diffuse synchrotron radiation emitted by those electrons. There we demonstrated that, at decelerating spherical shocks, the volume integrated spectra of both electrons and radiation deviate significantly from the test-particle power-laws predicted for constant planar shocks, because the shock compression ratio and the flux of inject electrons decrease in time. In this study, we consider spherical blast waves propagating through a constant density core surrounded by an isothermal halo with ρ ∝ r⁻ⁿ in order to explore how the deceleration of the shock affects the radio emission from accelerated electrons. The surface brightness profile and the volumeintegrated radio spectrum of the model shocks are calculated by assuming a ribbon-like shock surface on a spherical shell and the associated downstream region of relativistic electrons. If the postshock magnetic field strength is about 0.7 or 7 µG, at the shock age of ∼ 50 Myr, the volume-integrated radio spectrum steepens gradually with the spectral index from α_inj to α_inj + 0.5 over 0.1–10 GHz, where α_inj is the injection index at the shock position expected from the diffusive shock acceleration theory. Such gradual steepening could explain the curved radio spectrum of the radio relic in cluster A2266, which was interpreted as a broken power-law by Trasatti et al. (2015), if the relic shock is young enough so that the break frequency is around 1 GHz.