• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.657-658
• /
• 2006

Recently, the micro on-off valves have been focused on core technology in the fields of the production line of semi-conductor chips and the micro fluid chips for bio-medical applications. A key characteristics for micro valve, operated by compressed air, are high speed response and great repeatability. Indeed, it is also important to keep the pressure on the cross-sectional area of the poppet to be constant regardless of the fluctuation of the pressure exerted on the ports. In this study, we have designed and analysed the high-speed and high flow rate micro on-off valve using the analogy of equivalent magnetic circuit and Finite Element Method(FEM) respectively. In case of poppet, flow field characteristic was analyzed by the variation of poppet and it was able to display flow field by changing the location of the poppet. Also, we verified possibility of the design through the static and dynamic pressure and the 3D distribution curve of the force by working the front poppet.

• The Korean Journal of Ceramics
• /
• 제5권4호
• /
• pp.368-370
• /
• 1999

Using DC faced target sputtering method we grow AIN the films on the $Al_2O_3$(0001) substrate with varying thickness(17$\AA$-1000$\AA$). We measured x-ray diffraction(XRD) profiles by synchrotron radiation($\lambda$=1.12839 $\AA$) with four circle diffractometer. The full width half maximum(FWHM) of rocking curve for the AIN (0002) diffraction of the film grown at $500^{\circ}C$ was $0.029^{\circ}$. Also, we confirmed that the stress between AIN thin film and $Al_2O_3$(0001) substrate was reduced as increasing AIN film thickness, and the critical thickness of 400~500 $\AA$, defined as a lattice constant in the film agrees with that in a bulk without stress, was obtained.

• 대한치과교정학회지
• /
• 제3권1호
• /
• pp.7-13
• /
• 1972

정상 치열궁에 관한 연구는 많은 학자들에 의해 시행되어온 바 학자들 간에는 아무런 일관성이 없다는 의견과 치열궁을 대표할 만한 기하학적 곡선이 존재한다는 의견이 상충되어 왔다. 그중 후자의 이론이 지배적인 것으로 보이나 그 중에서도 곡선의 형태에 관하여서는 다시 많은 논란이 있었다. Bonwill과 Hawley등에 의한 Circle론, Black의 반타원론, Angle의 포물선론, 이외에도 많은 의견이 있는 가운데 저자는 정상교합을 유지하는 한국인 성인을 대상으로 Bonwill과 Hawley의 이론을 기초로 한 연구를 시행한 바 다음과 같은 결과를 얻었다. 1. 정상교합을 유지하는 한국인 성인의 치열은 전치에 있어서 원호에 근사한 배열을 갖는다. 2. 원의 지름은 6전치의 폭경의 합에 대하여 다양하므로, 전치 배열이 치아의 크기에 엄격히 연관됐다고 단정 할 수는 없다. 3. 그러나 6전치 폭경의 합에 대한 원의 지름의 비율은 그 평균치가 상하악 모두 1 : 1에 매우 근접하고 이 사실은 Bonwill의 결론에 부합한다. 4. 견치간 폭경과 구치간 폭경은 육전치의 합에 대한 비율이 상하악에 있어서 그 형태가 다름에 따라 상이하나 비교적 일정하게 나타난다.

• 전력전자학회논문지
• /
• 제19권4호
• /
• pp.320-326
• /
• 2014

In this paper, the new smart dimming algorithm which is mixed with PWM and PAM control method is proposed for reducing the power consumption of LED TV Backlight. The proposed technique is using the curve characteristics of LED forward voltage and current which is proportionally changing LED forward voltage as changing LED forward current. Therefore, each PWM and PAM control method has different LED forward voltage and current in the same brightness condition. The PWM control method adjusts the brightness of LED TV Backlight by only varying the duty ratio of PWM and constantly sustaining the amplitude of LED forward current and voltage. So, the level of LED forward current and voltage in the PWM control method is relatively high and constant regardless of duty ratio of PWM. On the other hand, the PAM control method adjusts the brightness of LED TV Backlight by directly varying the level of LED forward current. So, the level of LED forward current and voltage in the PAM control method is lowered according to the brightness level. For the above-mentioned reason, the PAM control method has the advantage of reducing the total power consumption of LED TV Backlight at the brightness condition of below 100%, compared with PWM control method. By implementing this characteristic to LED driver circuit with control algorithm in MCU, the power consumption of LED TV Backlight can expect to be reduced. The effectiveness of the proposed method, new smart dimming algorithm, CPWAM(=Conditional Pulse Width Amplitude Modulation), has been verified by experimental results.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1284-1287
• /
• 2005

Peripheral pentacene region gives a significant influence on C-V characteristics of metal-oxide-pentacene capacitor structure. When the gate voltage goes toward negative, the effect of peripheral pentacene region becomes larger. Remaining gate DC bias constant and changing small signal frequency, the capacitance of peripheral pentacene changes along with frequency so that the total capacitance value also changes. The influence of peripheral pentacene region should be removed to measure accurate C-V characteristics, because it is hard to take into account the effect of the region quantitatively. After removing the influence of peripheral pentacene region, acceptor concentration, flat band voltage and depletion width of pentacene thin film are extracted from an accurate C-V curve as $1.58{\times}10^{17}cm^{-3}$, -1.54 V and 39.4 nm, respectively.

• 한국농공학회지
• /
• 제32권4호
• /
• pp.71-80
• /
• 1990

Model tests for the ultimate pullout resistance of anchorages and investigation of failure behaviors in cohesionless soil have been conducted. The factors affecting the anchorage are mostly the geometry of the system, and soil properties of sands. The main conclusions of the experimental work were as follows. 1. The load - displacement relationship can be a form of parabolic curve for all plates. 2. The change in ultimate pullout resistance of anchor is mostly affected by embedment ratio and size of anchor, and influenced to a lesser degree by its shape. 3. Critical embedment ratio which is defined as the failure mode changes from shallow to deep mode is increased with increasing height of anchor. 4. For a constant anchor height, as the width of anchor increases the ultimate pullout resistance also increases. However, considering the efficiency of anchor for unit area, width of anchor does not appear to have any sigrnificant contribution on increasing anchor city. 5. Anchor capacity has a linear relation to sand density for any given section and the rate of change increases as the section increases. Critical depth determining the failure patterns of anchor is decreased with a decrease of sand density. 6. With increasing inclination angle, size of anchor, and decreasing embedment ratio, the ultimate pullout resistance of anchor under inclined loading is significantly decreased. 7. The ultimate pullout resistance of double anchor, a method of improving single of anchor capacity, is influenced by the center - to - center spacing adjacent anchors. It is also found that tandem and parallel anchor rigging arrangements decrease the anchor system capacity to less than twice the single anchor capacity due to anchor interference.

• 한국인터넷방송통신학회논문지
• /
• 제22권1호
• /
• pp.121-126
• /
• 2022

본 연구는 변형된 힐버트 커브 프랙탈 모노폴 구조를 단순화하여 육각형 대칭 패턴을 가지면서 모노폴 형태로 구현한 안테나에 대한 것이다. 힐버트 커브 프랙탈 모노폴 구조를 단순화하여 소형화했을 뿐 아니라 성능 개선을 모색하기 위해 복사기 구조를 육각형 대칭 패턴으로 구현했다. 기판 유전체의 비유전율은 4.7이며, 미앤더 형태로 대칭 구조를 갖는 총 선로길이는 59 mm이다. 안테나의 크기는 10 mm × 10 mm × 0.8 mm이고, 선폭은 0.4 mm이다. 안테나 측정 지그의 크기는 64 mm × 21 mm × 1 mm이다. 공진주파수는 1.57 GHz 이고, 주파수 범위는 1.51 ~ 1.615 GHz이다. 주파수대역폭은 105 MHz이다. 안테나 이득은 YZ-plane의 측정이득은 2.32 dBi 이고, XZ-plane의 경우 -1.03 dBi를 얻었다. 결과적으로 육각형 대칭 패턴 프랙탈 구조를 이용하여 안테나 소형화를 이루었으며, 복사기 구조 변화로 안테나 성능 개선이 용이함을 확인했다.

• 대한기계학회논문집
• /
• 제10권6호
• /
• pp.937-946
• /
• 1986

본 논문에서는 이와 같은 점을 고려하여 두께가 얇은 평면응력 상태의 CT 시 험편을 이용하여 W와 z의 변화에 따른 파괴인성치와 J저항곡선의 거동 및 크랙성장을 고려한 J적분식도 검토하였다. 또한, 재료를 변형경화 재료로 가정하고 HRR 응력변 형율장의 특성을 이용하여 컴퓨터 프로그램을 작성하여 J적분을 구한 후 실험치와 상 호 비교 검토하였다. 이 때 사용한 입력자료는 실험치의 그것과 동일하게 하였다.

• 콘크리트학회논문집
• /
• 제21권1호
• /
• pp.13-20
• /
• 2009

본 연구에서는 섬유혼입률이 초고강도 강섬유보강 콘크리트의 인장연화거동 특성에 미치는 영향을 파악하고자 하였다. 노치 낸 보에 대한 3점 재하 휨실험을 통해 초고강도 강섬유보강 콘크리트의 휨인장 거동을 구하고, Uchida 등이 제안한 역해석법을 사용하여 휨 실험 결과로부터 인장연화곡선을 도출하였다. 노치 낸 보의 휨 실험 결과에서 초기강성은 섬유혼입률에 관계없이 일정한 값을 나타내고, 강섬유의 혼입률이 증가할수록 초고강도 강섬유보강 콘크리트의 휨인장강도는 증가하며 연화거동은 일정 균열폭에서 점근적으로 수렴하는 경향을 나타내었다. 역해석을 통해 구한 인장연화곡선으로부터 섬유혼입률과 임계균열폭, $\omega_0$의 함수로 인장연화모델을 제안하였으며, 인장연화모델은 균열이 진행됨에 따라 일정한 인장응력 값을 가지는 소성구간과 지수함수로 주어지는 연화구간으로 나누어 제시하였다. 본 연구에서 제시한 인장연화모델을 적용하여 점성균열모델을 이용한 유한요소해석을 수행한 결과, 해석 결과와 실험 결과와 잘 일치하는 것으로 나타났다.

• 한국표면공학회지
• /
• 제51권6호
• /
• pp.393-399
• /
• 2018

Formation behavior of aluminum anodic oxide (AAO) films on Al6061 alloy was studied in view of thickness, morphology and defects in the anodic films in 20 vol.% sulfuric acid solution at a constant current density of $40mA/cm^2$, using voltage-time curve, observation of anodized specimen colors and surface and cross-sectional morphologies of anodic films with anodization time. With increasing anodizing time, voltage for film formation increased exponentially after about 12 min and its increasing rate decreased after 25 min, followed by a rapid decrease of the voltage after about 28 min. Surface color of anodized specimen became darker with increasing anodizing time up to about 20 min, while it appeared to be brighter with increasing anodizing time after 20 min. The darkened and brightened surfaces with anodizing time are attributed to an increase in thickness of porous anodic oxide film and a chemical damage of the films due to heat generated by increased resistance of the film, respectively. Cross-sectional observation of AAO films revealed the formation of defects of crack shape at the metal/oxide interface after 15 min which prevents the growth of AAO films. Width and length of the crack-like defect increased with anodizing time up to 25 min of anodizing, and finally the outer part of AAO films was partly dissolved or detached after 30 min of anodizing, resulting in non-uniform surface structures of the AAO films.