• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.729-732
• /
• 2003

The K-R design curve is an engineering method of linear-elastic fracture analysis under plane-stress loading conditions. By the way, linear-elastic fracture mechanics (LEFM) is valid only as long as nonlinear material deformation is confined to a small region surrounding the crack tip. Like general steels, it is virtually impossible to characterize the fracture behavior with LEFM, in many materials. Critical values of J contour integral or crack tip opening displacement (CTOD) give nearly size independent measures of fracture toughness, even for relatively large amounts of crack tip plasticity. Furthermore, the crack tip opening displacement is the only parameter that can be directly measured in the fracture test. On the other. the crack tip opening angle (CTOA) test is similar to CTOD experimentally. Moreover, the test is easier to measure the fracture toughness than other method. The shape of the CTOA curve depends on material fracture behavior and, on the opening configuration of the cracked structure. CTOA parameter describes crack tip conditions in elastic-plastic materials, and it can be used as a fracture criterion effectively. In this paper, CTOA test is performed for steel JS-SS400 hot-rolled thin plates under plane-stress loading conditions. Special experimental apparatuses are used to prevent specimens from buckling and to measure crack tip opening angle for thin compact tension (CT) specimens.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.53-58
• /
• 2003

Many researchers have rigorously studied the nonlinear behavior of stress-strain relationship of concrete using mathematical curves. Most of model equations for stress-strain relationship, however, have been focused on old age concrete, and were not able to adequately represent the behavior of concrete at an early age. A wide understanding on the behavior of concrete from early age to old age is very important in evaluating the durability and service life of concrete structures. In previous study by authors of this paper, a stress-strain model equation for low- and medium-strength concretes was suggested. In this paper, to extend the application region of compressive stress-strain curve to high-strength concrete, an analytical research was performed. An analytical expression of stress-strain curve with strength and age was developed using regression analyses on the experimental results. For the verification of the proposed model equation, it was compared to the experimental data. The result showed that the proposed model equation was not only compatible with the experimental data quite satisfactorily but also describing well the effect of strength and age on stress-strain curve.

• 한국멀티미디어학회논문지
• /
• 제9권9호
• /
• pp.1150-1159
• /
• 2006

본 논문에서는 지오데식 동적 윤곽선 모델을 이용하여 뇌실 영역을 검출하기 위하여 기존의 에지지시함수를 대신한 영역 기반의 곡선진행억제 함수를 제안하였다. 제안한 곡선 진행 억제 함수는 뇌실 영역의 검출에 매우 효과적이었으며, 이 함수는 MRI 영상에서 밝게 나타나는 뇌실 영역의 평균 밝기를 기반으로 한다. 본 논문에서는 제안한 방법이 기존의 방법보다 뇌실 영역을 잘 검출할 수 있음을 다양한 척도를 이용하여 수치적으로 비교하였다. 실제 정상과 뇌종양에 의한 뇌질환 영상에 적용시켜 뇌실 검출 과정을 시각적으로 비교하여 우수성을 검증하였다.

• Journal of Astronomy and Space Sciences
• /
• 제14권2호
• /
• pp.216-224
• /
• 1997

산개성단 NGC 7209에 속한 쌍성 SS Lac에 대하여 원자외선 영역의 IUE 관측을 수행하였다. IUE 저 분산의 짧은 파장과 긴 파장 영역의 스펙트럼을 합성하여 에너지 분포 곡선을 완성하고 적색 화 현상을 제거한 후, Kurucz 항성대기 모델과 비교하여 SS Lac의 표면온도, gravity, abundance 등을 결정하였다. SS Lac의 식 현상이 중단되기 이전의 광도곡선을 분석하고, SS Lac의 가능한 거리를 구하여, SS Lac이 산개성단 NGC 7209의 구성원임을 확인하였다. 식이 중단된 이유는 충돌에 의한 합병보다는 제 3체에 의한 공전궤도 기울기의 변화가 더 타당성이 있는 것으로 판명되었다.

• 한국물환경학회지
• /
• 제25권4호
• /
• pp.573-579
• /
• 2009

The performance of Rainfall-Runoff Forecasting System (RRFS), the watershed management model for the Geum river basin, is evaluated based on the agreement between the simulated and observed hydrographs and the behavioral characteristics of the flow-duration curves. As a result, the simulated hydrographs are well agreed with the observed ones except high flow discharges. It is inferred that most of the errors in the simulated hydrographs are due to the misestimation of agricultural water use in $2^{nd}$ quarter and the discrepancy of the peak discharges in $3^{rd}$ quarter. It is however judged that RRFS would give the reliable runoff hydrographs from the point of view of continuous model application. And simulated flow-duration curves and flow-duration coefficients are also similar to the observed ones except flood flow region. From the above result it is confirmed that the construction of Yongdam dam improves the state of flow-duration curve at the Gongjoo station.

• 스마트미디어저널
• /
• 제1권2호
• /
• pp.23-33
• /
• 2012

본 논문에서는 영상처리 및 컴퓨터비전 분야에서 다양하게 응용되고 있는 텐서보팅(tensor voting)의 특징을 고찰하고자 한다. 일반적으로 텐서보팅은 점 (points), 곡선 성분 (curve elements), 그리고 표면 조각 성분 (surface patch elements)로 주어진 n-차원의 데이터들로부터 교차점 (junction), 곡선 (curve), 영역 (region), 그리고 표면 (surface)과 같은 구조 특징을 추론할 수 있다. 영상 및 장면에서 구조적 추론을 이용한 지각기반 그룹핑 (perceptual grouping) 방법들이 다양한 분야에서 연구되어 응용되고 있다. 텐서보링은 잡음에 강건한 특징을 제공하며 다양한 응용을 통하여 효율성을 보여주고 있다.

• 천문학회보
• /
• 제36권1호
• /
• pp.28.1-28.1
• /
• 2011

We observed the transiting exoplanet, TrES-2b, with 1.5m telescope at Maidanak Observatory in Uzbekistan. We observed TrES-2 system for six nights, which contained two orbital periods of the planet. Therefore, we obtained the entire light curve of TrES-2b, which covered not only the whole primary transit containing both ingress and egress part, but also non-transit region. We used both R and Y band filters. Especially, Y filter is used first for transit observation and covers relatively longer wavelength ($1.02{\mu}m$ of center wavelength), to provide the light curve less affected by limb darkening. By fitting best model light curve for the obtained one, we determined these observables, transit depth, transit length, and planet's orbital period, which led to the determination of five physical parameters, stellar radius R*, stellar mass M*, inclination i, semi-major axis a, and planetary radius Rp. We will discuss of these results.

• 한국안전학회지
• /
• 제26권1호
• /
• pp.21-26
• /
• 2011

Extinction and ignition characteristics of $CH_4$-air counterflow diffusion flame were numerically investigated using a Flame-Controlling Method(FCM). A skeletal reaction mechanism, which adopts 17 species and 58 reactions, was used in the simulation. The extinction and ignition conditions of the $CH_4$-air diffusion flames were investigated with varying the global strain rate. Upper and middle branches of S-curve for the peak temperature in the inverse of the global strain rate space were obtained with the FCM. The structures of diffusion flames in the upper and middle branches of S-curve were compared. It was found that the global strain rate was not correlated with the local strain rate well in the low global strain rate region. It is expected that the FCM is very useful to obtaining the extinction and ignition condition of diffusion flame, such as fires.

• Kyungpook Mathematical Journal
• /
• 제56권2호
• /
• pp.583-595
• /
• 2016

Archimedes showed that for a point P on a parabola X and a chord AB of X parallel to the tangent of X at P, the area S of the region bounded by the parabola X and chord AB is four thirds of the area T of triangle ${\Delta}ABP$. It is well known that the area U formed by three tangents to a parabola is half of the area T of the triangle formed by joining their points of contact. Recently, the first and third authors of the present paper and others proved that among strictly locally convex curves in the plane ${\mathbb{R}}^2$, these two properties are characteristic ones of parabolas. In this article, in order to generalize the above mentioned property $S={\frac{4}{3}}T$ for parabolas we study strictly locally convex curves in the plane ${\mathbb{R}}^2$ satisfying $S={\lambda}T+{\nu}U$, where ${\lambda}$ and ${\nu}$ are some functions on the curves. As a result, we present two conditions which are necessary and sufficient for a strictly locally convex curve in the plane to be an open arc of a parabola.

• 대한기계학회논문집
• /
• 제7권1호
• /
• pp.28-35
• /
• 1983

Quantitative analysis have been carried out on the micro-cracks on the surface and into the depth of unnotched smooth mild steel specimen under cyclic stains by rotating bending fatigue tests. Some of the results are; (1) Cracks initiate at the early stage of fatigue life N$_{I}$/ N$_{f}$=10 to 20%, and propagate during the rest of fatigue life. (2) Coalescence of highly crowded small fatigue cracks of random distribution seems to induce the final fracture at higher stress level. (3) The curves of crack initiation and the equal crack length on the graph of stress versus number of cycles are parallel to the S-N curve. (3) The curves of crack initiation and the equal crack length on the graph of stress versus number of cycles are parallel to the S-N curve. (4) The distributions of micro-surface crack length and depth show the composite Weibull distributions which are approximated to two straight lines separated by the value of transient region between stage I and stage II crack.k.k.