• Journal of the Korea Computer Graphics Society
• /
• v.6 no.1
• /
• pp.37-50
• /
• 2000

Using the complex formulation of plane curves which R. T. Farouki introduced, we can identify any plane polynomial curve with only a polynomial with complex coefficients. In this paper, using the well-known fundamental theorem of algebra, we completely factorize the polynomial over the complex number field C and from the completely factorized form of the polynomial, we find a new necessary and sufficient condition for a plane polynomial curve to be a Pythagorean-hodograph curve, obseving the set of all roots of the complex polynomial corresponding to the plane polynomial curve. Applying this method to space polynomial curves in the three dimensional Minkowski space $R^{2,1}$, we also find the necessary and sufficient condition for a polynomial curve in $R^{2,1}$ to be a PH curve in a new finer form and characterize all possible curves completely.

• Journal of Radiation Protection and Research
• /
• v.41 no.2
• /
• pp.93-99
• /
• 2016

Background: Industrial X-ray CT system is normally applied to non-destructive testing (NDT) for industrial product made from metal. Furthermore there are some special CT systems, which have an ability to inspect nuclear fuel assemblies or rocket motors, using high power and high energy (more than 6 MeV) pulsed X-ray source. In these case, pulsed X-ray are produced by the electron linear accelerator, and a huge number of photons with a wide energy spectrum are produced within a very short period. Consequently, it is difficult to measure the X-ray energy spectrum for such accelerator-based X-ray sources using simple spectrometry. Due to this difficulty, unexpected images and artifacts which lead to incorrect density information and dimensions of specimens cannot be avoided in CT images. For getting highly precise CT images, it is important to know the precise energy spectrum of emitted X-rays. Materials and Methods: In order to realize it we investigated a new approach utilizing the Bayesian estimation method combined with an attenuation curve measurement using step shaped attenuation material. This method was validated by precise measurement of energy spectrum from a 1 MeV electron accelerator. In this study, to extend the applicable X-ray energy range we tried to measure energy spectra of X-ray sources from 6 and 9 MeV linear accelerators by using the recently developed method. Results and Discussion: In this study, an attenuation curves are measured by using a step-shaped attenuation materials of aluminum and steel individually, and the each X-ray spectrum is reconstructed from the measured attenuation curve by the spectrum type Bayesian estimation method. Conclusion: The obtained result shows good agreement with simulated spectra, and the presently developed technique is adaptable for high energy X-ray source more than 6 MeV.

• The Journal of the Korea Contents Association
• /
• v.7 no.7
• /
• pp.11-23
• /
• 2007

Applications involving moving objects require index structures to handle frequent updates of objects' locations efficiently. Several methods to index the current, the past and the future positions of moving objects have been proposed for the applications. Most of them are based on R-tree like index structures. Some researches have made efforts to improve update performance of R-trees that are actually focused on query performance. Even though the update performance is improved by researchers' efforts, the overhead and immaturity of concurrency control algorithms of R-trees makes us hesitate to choose them for moving objects. In this paper, we propose an update efficient indexing method that can be applicable for indexing the past, the current and the future locations. The proposed index is based on B+-Trees and Hilbert curve. We present an advanced Hilbert curve that adjusts automatically the order of Hilbert curve in subregions according to the data distribution and the number of data objects. Through empirical studies, we show that our strategy achieves higher response time and throughput.

• Journal of Korea Water Resources Association
• /
• v.45 no.6
• /
• pp.597-606
• /
• 2012

With the availability of multi-scale hydrologic data in public domain depending on DEM size, there is a need for a modeling framework that is capable of using these data to simulate hydrologic processes at multiple scales for different topographic and climate conditions for distributed hydrologic model. To address this need, an object-oriented approach, called Geographic and Hydrologic Information System Modeling Objects (GHISMO), is developed. Main hydrologic approaches in GHISMO are storage-release for direct runoff and SCS curve number method for infiltration part. This paper presents conceptual and structural framework of storage-release concept including its application to two watersheds will be presented.

• Journal of the Korean Chemical Society
• /
• v.11 no.4
• /
• pp.159-164
• /
• 1967

An exact expression of the titration fraction as a function of the potential is derived for the cases where the coefficients of the both half reactions involved in the titration are homogeneous. It shows that the potential is independent of the concentration of the reagents not only at the equivalence point but also at all titration fractions. The sharpness of the end point detection by potentiometric method is shown to depend not only on the difference of the normal potentials involved but also strongly on the number of electrons transferred in each half reaction. The inflexion point of the potentiometric titration curve is shown to be slightly off from the equivalence point, including the cases where the number of electrons involved are equal. Completeness of the reaction in the course of titration is analyzed, too, mostly in terms of equilibrium constant, thus most of the results are applicable to any type of equilibrium in a single phase with particular relationship of coefficients of chemical equation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.576-580
• /
• 2010

NRCS의 유출곡선지수 산정법(CN; Runoff Curve Number method)은 유역내의 토지 이용 및 토지 피복, 토양특성, 수문학적 조건 등을 이용하여 총 강우량으로부터 유효 유출량을 계산하는 방법으로서 이론의 간편성과 적용성으로 인하여 여러 분야에 적용되고 있다. 그러나, 유출곡선지수의 특성상 지역적인 특성에 따라 차이가 발생할 수 밖에 없음에도 국내에서는 대부분 미국 NEH(National Engineering Handbook)에서 제시한 기준을 이용하고 있는 실정이다. 이에 대하여 본 연구에서는 국내 유역의 강우-유출 특성을 반영한 유출곡선지수를 산정하고 강우에 따른 직접 유출량을 모의하기 위한 방법을 연구하였다. 이를 위하여 보청천 유역의 관측 강우-유출 자료에 Hawkins et al(1993)등이 제시한 점근 유출곡선지수방법을 적용하고 이를 국가수자원관리종합정보시스템(WAMIS)에서 제시한 값과 비교하였다. 또한 유역의 대표 유출곡선지수에 대한 회귀식을 유도하고 이를 이용하여 보청천 유역의 하계 유출을 모의하고 그 결과를 비교 분석 하였다. 연구결과 대표 유출곡선지수식을 이용한 유역의 직접유출 모의결과가 단일 유출곡선지수시의 모의결과보다 더 우수한 결과를 나타내었다.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.363-365
• /
• 2000

This paper presents an improved method to estimate the maximum load level for heavily loaded power systems with the load-generation variation vector by using the elliptic pattern of the P-e curve. The previous study suggested a simple technique of removing e-f coupling, where only high voltage load flow solutions to calculate transforming angle of system reference is needed. The proposed algorithm is improved to require only one load flow solution at a specific load level in addition to the operating point at the beginning stage, which reduces the computation time and the iteration number of estimation. The proposed method can be efficiently applied to heaviIy loaded systems with the combination of CPFlow when the reactive power limit and ULTC are considered. In this paper, the effect of ULTC on the estimation of maximum loadability index is also investigated. The proposed algorithm is tested on New England 39 bus system and IEEE 118 bus system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.4
• /
• pp.590-597
• /
• 2011

The IDRS provides detection, classification and bearing/range estimation by performing wavefront curvature analysis on an intercepted active transmission from target. Especially, a estimate of the target bearing/range that significantly affects the optimal operation of own submarine is required. Target bearing/range can be estimated by wavefront curvature ranging which use the difference of time arrival at sensors. But estimation ambiguity occur in bearing/range estimation due to a number of peaks caused by high center frequency and limited bandwidth of the intercepted active transmission and distortion caused by noise. As a result the bearing/range estimation performance is degraded. To estimate target bearing/range correctly, bearing/range estimation method that eliminate estimation ambiguity is required. In this paper, therefore, for wavefront curvature ranging, NLS cost function with curve fitting method is proposed, which provide robust bearing/range estimation performance by eliminating estimation ambiguity. Through simulation the performance of the proposed bearing/range estimation methods are verified.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.4
• /
• pp.483-491
• /
• 2016

A simple aerodynamic calculation program for high Mach number flow is developed by combining the modified Newtonian method with Tannehill's curve fits for the thermodynamic properties of air in equilibrium state. Aerodynamic characteristics for a parabolic nose are predicted and compared with CFD(Computational Fluid Dynamics) analysis results. Comparison shows good agreements, and the developed program is expected to be a practical tool for slender body aerodynamic calculation for high Mach number flow.

• Journal of Korea Technology Innovation Society
• /
• v.15 no.4
• /
• pp.745-765
• /
• 2012

When attempting to use the income approach for the purpose of technology valuation, it is essential to identify the economic life of the technology in question. From the mid-2000s up to the present, the methods proposed by major Korean institutions for estimating the economic life of technologies have been based on cited patent life (CLT), which is one of the types of technology life. The present study utilizes cited patent life (CLT) to estimate the economic life of technology for the purpose of technology valuation, and proposes a new method of analyzing cited patent life, a method that has been improved by taking into consideration the elapsed period and the time period of investment required for commercialization, two factors which have been hitherto overlooked. Survival curve analysis is a method that has already been widely utilized to estimate the economic life of tangible assets, and this study applies the same method to the calculation of the cited patent life index of technology to provide a more objective method for determining the lifetime of a technology. The remaining life expectancy of cited patent life based on the number of elapsed years was calculated and used to determine the life expectancy of a technology that has reached a specific number of elapsed years, which is referred to as the remaining cited-patent life time (r-CLT).