• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6B
• /
• pp.554-562
• /
• 2004

This paper proposes on the technical blocking method of Internet harmful pornographic sites which is the most Internet negative-function. At Present, most technical methods based on web sites back-searching or words filtering for blocking the pornographic Internet sites have limitations. For this, this paper proposes the acoustic and image based blocking method for filtering harmful Internet sites. For this, sexual main body parts are extracted by texture analysis and curve fitting. Also acoustic signals are analyzed using pratt tool and auto-correlation function is adopted for matching between prototype signals and test signals. Finally, the effectiveness of this paper is demostrated by several experiments.

• Journal of the Korea Computer Graphics Society
• /
• v.22 no.5
• /
• pp.1-16
• /
• 2016

In this paper, we propose and efficient curve reconstruction method based on the classical least-square fitting scheme. Specifically, given planar sample points equipped with normals, we reconstruct the objective curve as the zero set of a hierarchical implicit ZP(Zwart-Powell)-spline that can recover large holes of dataset without loosing the fine details. As regularizers, we adopted two: a Tikhonov regularizer to reduce the singularity of the linear system and a discrete Laplacian operator to smooth out the isocurves. Benchmark tests with quantitative measurements are done and our method shows much better quality than polynomial methods. Compared with the hierarchical bi-quadratic spline for datasets with holes, our method results in compatible quality but with less than 90% computational overhead.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.4
• /
• pp.383-390
• /
• 2024

When measuring the radiated noise of an underwater vehicle, the range information between the vehicle and the receiver is an important factor, but since Global Positioning System (GPS) is not available in underwater, an alternative method is needed. As an alternative, the range is measured by estimating the arrival time, arrival time difference, and arrival frequency difference using a separate acoustic signal. However, errors occur due to the channel environment, and these outliers become obstacles in continuously measuring range. In this paper, we propose a method to reduce errors by curve fitting with a function in the form of a V-curve as a post-processing to remove outliers that occurred in the process of measuring range information. Simulation, lake and sea trials were conducted to verify the performance of the proposed method. In the results of the lake trial, the range estimation error was reduced by about 85 % from the Root Mean Square Error (RMSE) point of view.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.438-443
• /
• 1998

In this study, compared the degree of consoildation of vertical drain considering variation of smear effect and well resistance with that of hyperbolic and curve fitting method. It applied Barren, Yoshikuni, Hansbo, Onoue's theory for the consolidation of vertical drain, and compared differences of theoretical curve by comparing with measured value, and finded out the extent of smear effect and well resistance.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.10a
• /
• pp.300-305
• /
• 1998

A method of calculating wear amount which is based on digitally measured surface profile was suggested. The original profile of worn out profile was estimated from its adjacent surface profile by using least squares curve fitting with Fourier series. The approximated curve was well fitted to original surface profile. With this approach, more accurate calculation of the wear amount will be possible.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.1
• /
• pp.40-48
• /
• 2005

A hydraulic hose is an important part of the hydraulic system which transmits power using pressurized fluids. It allows relative motion between components at each end of the hose assembly, and it is much easier to route a hose assembly than it is to bend and install a rigid tubing assembly. Unnecessary loads, which drop the hose's pressure capability and shorten service life, depend on a hose-routing. Therefore, the Hydraulic system designers must be aware to consider unnecessary load does not affect the here. For this consideration in an early stage of the design process, CAD system must support the hose assembly routing design function which is to generate routing path and design fitting angle properly. This paper proposes 2 methods. One is to generate curves that are similar to routing paths of the real hose assembly using the energy minimization method and the optimization method. The other is to design fitting angles that are important design elements of a hose assembly using the Parallel Transport Frame. To implement the proposed methods above, commercial CAD software, CATIA has been integrated with our program.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42 no.4
• /
• pp.115-123
• /
• 2000

This study compared the degree of consolidation by hyperbolic, curve fitting , Asaoka's and methods using values measured with a theoretical curve in consideration of smear effect and well resistance. The degree of consolidation by the Hyperboilc method was underestimated than the degree of consolidation by Curve fitting. Asaoka's , and Monden's methods. The typical range of the coefficient of horizontal consolidation was Ch=(2-3)Cv in the case considering smear effect and well resistance, and Ch =(0.5-2.1) Cv in the case disregarding smear effect and well resistance. The degree of consolidation obtained by ground settlement monitoring was nearly the same value when the coefficient of smear zone permeability by back analysis was shown to be half that of in-situ and the diameter of the smear zone was shown to be double that of mandrel. By increasing the diameter reduction ratio of the drain, the time of consolidation was delayed. The effect of well resistance showed that the case of a small coefficient of permeability was much more than in the case of a large coefficient of permeability . It was recommended that when designing diameter reduction of a drain, well resistance should be considered.

• The Korean Journal of Applied Statistics
• /
• v.7 no.2
• /
• pp.249-261
• /
• 1994

The purpose of this research is to obtain a Simple Logistic Curve for the curve fitting of Korean total Population. Based on the population census data from 1949 to 1990, the parameters are estimated by 3-group method. As the results, intercensal populations of Korea from 1950 to 190 are estimated, and Korean total populations from 1991 to 2010 A.D. are projected. And we also can suggest the upper asymptote 58, 616 thousands of Korean total population.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.252-257
• /
• 2000

An efficient method is developed for mold thermal cycle analysis in repeated forming process, which is well suited to the analysis in TV glass production. plunger, which is a mold to press-form the glass, undergoes temperature fluctuation during a cycle due to the repeated contact and separation from the glass, which attains a cyclic steady state in the end. If analyzed straightforwardly of this problem, it leads to more than 80 cycles to get reasonable solution, and it is yet hard to setup stopping creteria due to extremely slow convergence. An exponential fitting method is proposed to solve the problem, where an exponential function is found to best approximate temperature values of 3 consecutive cycles, and new cycle is restarted with the function value at infinite time. From numerical implementation, it is found that the method reduces the number of cycles dramatically to only $6{\sim}15$ cycles to reach accurate solution within $1^{\circ}$ error. A system for the analysis is contructed, in which the thermal analysis is performed by commercial software ANSYS, and the fitting of the result is done by IMSL library.

• Korean Journal of Agricultural Science
• /
• v.25 no.2
• /
• pp.225-234
• /
• 1998

This study was compared the degree of consolidation by Hyperbolic, Curve fitting, Asaoka's, Monden's methods using measured value with theoretical curve in consideration of smear effect and well resistance. The results of the study were summarized as follows ; 1. The degree of consolidation by Hyperbolic method was underestimated than the degree of consolidation by Curve fitting, Asaoka's, and Monden's methods. 2. Typical range of horizontal coefficient of consolidation was $C_h=(2{\sim}3)C_v$ in the case considering smear effect and well resistance, and $C_h=(0.5{\sim}2.5)C_v$ in the case disregarding smear effect and well resistance. 3. The degree of consolidation obtained by ground settlement monitoring was nearly same value when the coefficient of permeability of smear zone by back analysis was shown the half that of in-situ and the diameter of smear zone was shown double that of mendrel. 4. Increasing of diameter reduction ratio of drain, the time of consoildation was delayed. The affection of well resistance the case of small coefficient of permeability was much more than that in the case of large coefficient of permeability. It was recommended that design of diameter reduction of drain consider smear effect and well resistance.