• 설비공학논문집
• /
• 제17권6호
• /
• pp.569-580
• /
• 2005

The present study investigates the convective heat/mass transfer characteristics in wavy ducts of a primary surface heat exchanger. The effects of duct aspect ratio and flow velocity on the heat/mass transfer are investigated. Local heat/mass transfer coefficients on the corrugated duct sidewall are determined using a naphthalene sublimation technique. The aspect ratios of the wavy duct are 7.3, 4.7 and 1.8 with the corrugation angle of $145\Omega$. The Reynolds numbers, based on the duct hydraulic diameter, vary from 300 to 3,000. The results show that at the low Re(Re $\leq$ 1000) the secondary vortices called Taylor-Gortler vortices perpendicular to the main flow direction are generated due to effect of duct curvature. By these secondary vortices, non-uniform heat/mass transfer coefficients distributions appear. As the aspect ratio decreases, the number of cells formed by secondary vortices are reduced and secondary vortices and comer vortices mix due to decreased aspect ratio at Re$\leq$1000. At Re >1000, the effects of corner vortices become stronger. The average Sh for the aspect ratio of 7.3 and 4.7 are almost same. But at the small aspect ratio of 1.8, the average Sh decreases due to decreased aspect ratio. More pumping power (pressure loss) is required for the larger aspect ratio due to the higher flow instability.

• 한국광학회지
• /
• 제17권5호
• /
• pp.420-429
• /
• 2006

곡률, 두께, 굴절률 오차와 같은 광축대칭 오차요인들 때문에 상면이 이동하는 디지털 카메라용 줌렌즈 광학계에서 보상자를 이동시켜서 상면을 고정시키는 조건을 가우스 괄호법을 이용하여 유도하였다. 그리고 줌렌즈 광학계의 일반적인 세 가지 형태(3군, 4군, 5군 줌렌즈)를 사용하여 이 조건의 타당성을 검증하였다. 이러한 줌렌즈 형태에서 각 면의 곡률, 두께, 굴절률 등을 공차 내에서 Monte Carlo 방법에 따라 임의로 변화시켰을 때, 보상자의 이동량의 분포가 정규분포를 이루는 것을 확인하였다. 그리고 이로부터 공정능력을 계산하여 보상자의 최대 이동량에서 이에 따른 불량률을 이론적으로 예측하는 방법을 제시하였다.

• 한국광학회지
• /
• 제26권2호
• /
• pp.83-87
• /
• 2015

본 논문은 자외선 광학센서 개발에 관한 것이다. 기존에 반도체 기반 자외선 센서를 대체하기 위해 개발된 단주기 광섬유격자기반 자외선 센서에 대한 측정 민감도를 향상시키기 위한 다양한 장치들을 설계하고 실험을 통해 성능을 확인하였다. 최근 연구를 통해 자외선 흡수에 따라 인장력이 유도되는 아조벤젠 폴리머 재료와 장력에 따른 광섬유격자 특성 변화를 조합하여 새로운 자외선 센서의 개념이 제시되었다. 본 연구에서는 광섬유격자 기반 자외선 센서에서 흡수하지 못하고 통과되는 자외선 잔광을 반사판을 이용해서 다시 반사시켜 센서에서 재흡수되는 원리로 센서의 민감도를 향상시켰다. 본 논문에서는 반사판의 종류를 선정하고 반사판의 곡률반경을 최적화하였다. 또한 기존의 원통형 집광렌즈를 이용한 민감도 향상 기술을 접목 시켜 아무런 장치가 없을 때와 비교해서 약 15배의 성능을 향상시키는 결과를 얻었다. 또한 외부 환경 효과를 줄이기 위한 패키지 모듈을 제작하여 적용하고 그 특성을 분석하였다.

• 한국광학회지
• /
• 제25권2호
• /
• pp.78-84
• /
• 2014

본 논문에서는 직경이 14.5 mm인 대면적 COB-type LED 패키지를 사용하면서도 15도 이내의 좁은 광속각을 구현하기 위해, 광학계 크기를 축소하고 동시에 satellite ring 발생을 억제할 수 있는 이중 반사경 구조를 고안하여 조명광학계용 2차 광학계를 최적 설계하였다. 최적 설계를 위해 광원 크기와 제 1 반사경의 광속각 관계를 이용하였고, satellite ring 발생을 억제하기 위한 제 2 반사경의 최적 위치 및 크기를 고려하였다. 그 결과 대체 상용 제품의 크기 제한을 만족하며 80%의 광속 효율을 달성할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제78권3호
• /
• pp.231-253
• /
• 2021

Pure bending loading conditions are not frequently occurred in practical engineering, but the flexural researches are important since it's the basis of mechanical property researches under complex loading. Hence, the objective of this paper is to investigate the flexural behavior of concrete-filled rectangular steel tube (CFRT) through combined experimental and numerical studies. Flexural tests were conducted to investigate the mechanical performance of CFRT under bending. The load vs. deflection curves during the loading process was analyzed in detail. All the specimens behaved in a very ductile manner. Besides, based on the experimental result, the composite action between the steel tube and core concrete was studies and examined. Furthermore, the feasibility and accuracy of the numerical method was verified by comparing the computed results with experimental observations. The full curves analysis on the moment vs. curvature curves was further conducted, where the development of the stress and strain redistribution in the steel tube and core concrete was clarified comprehensively. It should be noted that there existed bond slip between the core concrete and steel tube during the loading process. And then, an extensive parametric study, including the steel strength, concrete strength, steel ratio and aspect ratio, was performed. Finally, design formula to calculate the ultimate moment and flexural stiffness of CFRTs were presented. The predicted results showed satisfactory agreement with the experimental and FE results. Additionally, the difference between the experimental/FE and predicted results using the related design codes were illustrated.

• 한국항공우주학회지
• /
• 제49권8호
• /
• pp.689-698
• /
• 2021

현대 전장의 탐지기술 발달로 인해 항공기의 생존성이 크게 위협받고 있다. 그중 적외선(IR) 추적 미사일은 항공기의 생존성에 큰 영향을 끼치며, 항공기 임무 성공률을 저하시키는 주된 요인이다. 항공기 생존성을 증가시키기 위하여 곡률을 추가한 형상 변형 노즐에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 항공기 생존성을 증가시키기 위한 형상 변형 노즐 중 Double Serpentine 노즐을 선정한 다음, 노즐의 최대 면적변화율의 위치 효과를 분석하였다. 노즐의 최대 면적변화율이 노즐의 추력과 출구의 평균 온도에 영향을 끼치는 것을 확인하였다. 또한 최대 면적변화율이 노즐 후방에 위치함에 따라 추력 페널티가 줄어드는 것을 확인하였다.

• Asian Spine Journal
• /
• 제12권6호
• /
• pp.1028-1036
• /
• 2018

Study Design: Single-center, observational, case-control study. Purpose: Comparison and analysis of the metabolic and coagulative profiles in patients with idiopathic scoliosis, patients with congenital scoliosis, and healthy controls. Overview of Literature: Serum melatonin deficiency has been a controversial topic in the etiopathogenesis of scoliosis. Low bone mineral density, low vitamin D3 levels, and high parathyroid hormone levels are common metabolic abnormalities associated with scoliosis that may be responsible for its pathogenesis. In addition to metabolic defects, several studies have shown coagulation defects that either persist from the preoperative period or occur during surgery and usually lead to more than the expected amount of blood loss in patients undergoing deformity correction for scoliosis. Methods: The study population (n=73) was classified into those having congenital scoliosis (n=31), those with idiopathic scoliosis (n=30), and healthy controls (n=12). After detailed clinicoradiological evaluation of all the subjects, 10-mL blood samples were collected, measured, and analyzed for various metabolic and coagulation parameters. Results: The mean serum melatonin levels in patients with idiopathic scoliosis were significantly lower than those in the healthy controls. Although the mean serum melatonin level in the congenital group was also low, the difference was not statistically significant. Serum alkaline phosphatase and parathyroid hormone levels were higher in the scoliosis groups, whereas the vitamin D level was lower. No differences were observed in the coagulation profiles of the different groups. Conclusions: Low serum melatonin levels associated with scoliosis can be a cause or an effect of scoliosis. Moreover, low bone mineral density, high bone turn over, and negative calcium balance appear to play an important role in the progression, if not the onset, of the deformity.

• 한국정보통신학회논문지
• /
• 제23권6호
• /
• pp.659-665
• /
• 2019

컨테이너 표면에는 적재된 화물의 위험 여부에 따라 다양한 플래카드가 부착된다. 위험물이 적재된 컨테이너는 일반 컨테이너 별도로 관리되어야 하므로 항만 자동화 시스템의 일부로 플래카드 자동 인식에 대한 수요가 생겨나고 있다. 이 논문에서는 컨테이너의 후면을 촬영한 영상에서 플래카드의 형태적인 특징을 이용하여 자동으로 플래카드 영역을 추출하고 이를 인식하는 시스템을 제안한다. 플래카드 인식에서는 특히 컨테이너의 표면 굴곡에 의해 다양한 왜곡이 발생할 수 있으므로 영역 추출 및 인식 과정에서 주의가 필요하다. 제안하는 시스템은 플래카드가 다이아몬드 형태를 가지며, 클래스 번호가 아래 꼭지점 바로 위에 기입된다는 특징을 사용하여 관심 영역을 자동으로 추출하고, 플래카드를 자동으로 인식할 수 있다. 제안하는 시스템을 실제 이미지에 적용하였을 때 오류 없이 플래카드를 인식할 수 있었으며, 사용한 영상 분석 기법은 다양한 영상 분석 시스템에 적용될 수 있다.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.807-817
• /
• 2019

Airborne Gamma Ray Spectrometry (AGRS) with its important applications such as gathering radiation information of ground surface, geochemistry measuring of the abundance of Potassium, Thorium and Uranium in outer earth layer, environmental and nuclear site surveillance has a key role in the field of nuclear science and human life. The Broyden-Fletcher-Goldfarb-Shanno (BFGS), with its advanced numerical unconstrained nonlinear optimization in collaboration with Artificial Neural Networks (ANNs) provides a noteworthy opportunity for modern AGRS. In this study a new AGRS system empowered by ANN-BFGS has been proposed and evaluated on available empirical AGRS data. To that effect different architectures of adaptive ANN-BFGS were implemented for a sort of published experimental AGRS outputs. The selected approach among of various training methods, with its low iteration cost and nondiagonal scaling allocation is a new powerful algorithm for AGRS data due to its inherent stochastic properties. Experiments were performed by different architectures and trainings, the selected scheme achieved the smallest number of epochs, the minimum Mean Square Error (MSE) and the maximum performance in compare with different types of optimization strategies and algorithms. The proposed method is capable to be implemented on a cost effective and minimum electronic equipment to present its real-time process, which will let it to be used on board a light Unmanned Aerial Vehicle (UAV). The advanced adaptation properties and models of neural network, the training of stochastic process and its implementation on DSP outstands an affordable, reliable and low cost AGRS design. The main outcome of the study shows this method increases the quality of curvature information of AGRS data while cost of the algorithm is reduced in each iteration so the proposed ANN-BFGS is a trustworthy appropriate model for Gamma-ray data reconstruction and analysis based on advanced novel artificial intelligence systems.

• 한국의류산업학회지
• /
• 제21권4호
• /
• pp.480-487
• /
• 2019

This study used 3D technology to develop a multi-functional sports brassiere with increased comfort and fit that can be worn as a base layer during exercise or as underwear. A 75A size industrial lingerie figure was used to develop a standard pattern. 3D tools for scanning and pattern making, such as Vivid 910, Geomagic Design X, 2C-AN and Yuka CAD were used. The sports brassiere was designed as a tank top style with dual structure and linings attached to a pad utilized with a sport brassiere mold cup. 3D outer and lining's pattern was differently developed in consideration of the body's curvature with pad's shape and structure. Shoulder and neck part reduction rates were adjusted to increase the neck areas fit that considered the nude pattern's structure due to uncomfortableness felt by wearers who were uncomfortable with the neck areas fit on existing brand products. The reduction rate was also set differently on each part. For example, the reduction rate on outer side panel was set strongly to increase the breast's volume. Two products, developed by a 3D sports brassiere and previously released product, were worn on 8 subjects in their 20's to evaluate fit, comfort, and purchase preferences. The evaluation proved that newly developed 3D products were superior to comparative products. The results of the clothing pressure measurement indicate that the newly developed sports brassiere's front part had less pressure on upper bust and shoulder areas compared to comparative products as well as showed less pressure on the back side, which shows improved wearing comfort compared to comparative products.