• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2006년도 하계 학술대회 논문집
• /
• pp.77-80
• /
• 2006

This paper based on spiral vector, three phase induction motor is described a detailed modeling by a phase segment methode. Based on this model, A torque control and the equation of regenerative power for the induction motor drive, based on the field acceleration method(FAM), is presented. The speed control system is designed to be applied voltage source inverters that is easy the current type feedback of power regeneration for motor drive. The ability of shaving power to be measured power regeneration has been investigated in speed acceleration and reduction. And it is change of stator resistance that the voltage commands include error, the ripple of exited voltage and torque occur from the results. The experimental tests verify the performance of the proposed regenerative drive for FAM, proving that good behavior of the drive is achieved in the transient and steady-state operating conditions.

• Current Optics and Photonics
• /
• 제1권2호
• /
• pp.85-89
• /
• 2017

It is shown that polarization singularities of a new type, namely U and P singularities, arise at the transverse cross section of a partially coherent beam, instead of the common singularities such as C points and L lines in a completely coherent vector field. A relationship between the two kind of singularities with respect to intensity is proposed. We also present a setup that can generate the new singularities, and any desired distribution of degree of polarization, using intensity control.

• 한국컴퓨터정보학회논문지
• /
• 제4권4호
• /
• pp.94-100
• /
• 1999

본 논문은 흡필드 모델의 실수연산을 고속으로 수행할 수 있는 디지털 신경회로망의 구현에 관한 연구이다. 흡필드 모델［1］-［8］의 연산과정은 행렬-벡터의 연산으로 기술 할 수 있으며, 이 연산과정은 순환, 반복적으로 이루어지므로 어레이프로세서 구조로 설계하기에 적합하다. 또한, Look-up-Table(연산표)에 의하여 비선형 함수를 출력함으로써, 고속의 실수 연산을 수행할 수 있도록 설계하였다. 본 논문에서 제안한 방법은 현재 개발된 VLSI기술로 실현 가능하기 때문에 실제 신경회로망의 응용분야에 이용될 수 있을 것으로 기대된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.109-111
• /
• 1997

A sensorless drive of induction motor has several advantages; low cost and mechanical simplicity. This paper investigates a field-oriented control method without speed and flux sensors. The control strategy is to design an adaptive state observer for flux estimation and to estimate the rotor speed from the estimated rotor flux and stator current. The entire control algorithm including space vector PWM is implemented by software of the digital signal processor TMS320C31. The experimental results indicate good speed responses.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.960-963
• /
• 2003

Sound intensity method is well known as a visualization technique of sound field and sound propagation in noise control. Sound intensity is a vector quantity that describes the magnitude and the direction of net flow of acoustic energy at a given position. The current measuring method is expensive and difficult to identify the noise source exactly. In this paper, we have studied the noise source identification and the characteristics of noise source of rotary compressor for air conditioner using complex sound intensity method. The new method for instantaneous sound intensity is also proposed and it is useful for transient state and steady state. The criteria of these state, select auto correlation coefficient. The advantage, simplicity and economic attribution of this method are verified by analyzing the characteristics of noise source with instantaneous sound intensity compared to mean sound intensity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.3-5
• /
• 2005

This paper presents a analysis solutions for the general class of iron-cored Permanent Magnet Linear Synchronous Motor(PMLSM) with vertical topologies. In our design and analysis, rotor consisting of permanent magnets and slot less iron-cored coil stator are treated in a uniform way via vector potential. For one such motor structure, we give analytical formulas for its magnetic field by permanent magnet and current coil and variation of the Back-EMF and magnetization inductance according to coil turns.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3086-3088
• /
• 1999

An ultrasonic sensor is one of most popular sensor used to navigate mobile robots within environments containing obstacles. But many navigation algorithm have studied because of the drawback of ultrasonic sensor such that poor directionality, frequent misreadings, specular reflections. Also, the most crucial drawback of this algorithm, that is VFF, VFM, EDM, PFM, WFM, GFM etc. has been that the mobile robot may become trapped in a local minimum. In this paper, we present a theoretical study of a navigation algorithm which integrals a heuristic-search local minimum (or trap) recovery method with a vector-field based method to maneuver cylindric mobile robots in unknown of unstructured environments. Also, an autonomous mobile robot uses dead-reckoning to estimate the current position and orientation of a mobile robot.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
• /
• pp.352-354
• /
• 2000

The induction motor is a high-efficiency machine when working close to its rated operation point. This paper uses a simple induction motor model that includes iron losses. The model, which only requires the knowledge of conventional induction motor parameters, is referred to a field-oriented frame. At steady-state light-load condition the minimum point of the input power can be found with the condition that it is possible to obtain the same torque with different combinations of flux and current values. Using the minimum point. the drive system with the proposed efficiency optimization controller can be controlled easily. Simulation and experimental results show the effectiveness of the control strategy proposed for an induction motor drive.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
• /
• pp.372-374
• /
• 2000

This paper presents a study on the indirect FOC (field oriented control) of induction motor using TMS320F240. This DSP has become possible to design and implement a highly efficient and accurate AC induction drive control. This paper describes a pulse width modulator based on the voltage space vectors technique that accepts voltage demands in dq coordinates and generates three-phase PWM waveforms to drive a variable frequency voltage-source inverter. The Current Model lock is added to generate the rotor flux angular speed.

• Journal of Electrical Engineering and Technology
• /
• 제8권4호
• /
• pp.945-950
• /
• 2013

This paper deals with the ellipse permanent magnet machines for the minimization of torque ripple based on electromagnetic field theory. On the basis of a magnetic vector potential and a two dimensional (2-D) polar system, analytical solutions for flux density due to permanent magnet (PM) and current are obtained. In particular, the analytical solutions for mathematical expressions of magnets with different circumferential thicknesses can be solved introducing improved magnetization modeling techniques. The analytical results are validated extensively be nonlinear finite element solutions, a reduction of torque ripple can be achieved.