• 한국정밀공학회지
• /
• 제33권5호
• /
• pp.419-425
• /
• 2016

A powder spreading phenomenon is one of disadvantageous characteristics of the powder bed fusion process using electron beams. The powder spreading phenomenon can be controlled using a pre-heating process of metallic powders. The aim of this paper was to investigate the preheating process of Stellite21 powder using electron beams. Powder spreading experiments were performed to examine the influence of process parameters on the spreading behaviors of Stellite21 powder. Powder heating experiments were carried to investigate the effects of the focusing current of the electron beam on the quality of the heated region. Using the results of the powder spreading and heating experiments, an appropriate combination of process parameters was obtained. The pre-heating experiment of Stellite21 was performed using the estimated combination of process parameters. The results of preheating experiments showed that the preheated Stelllite21 layer with desired characteristics can be created when the estimated combination of process parameters is applied.

• 한국해양공학회지
• /
• 제25권2호
• /
• pp.108-112
• /
• 2011

When oil spills occur in the ocean because of a ship collision or grounding, the oil in the sea will spread to the coastline. To effectively and promptly prevent such an oil spread, the prediction of the direction and speed of the spreading oil must be made. By applying the coastal wave diffusion theory with a consideration of the effects of wind and current, the oil spreading direction and speed can be predicted promptly so that the National Disaster Prevention System can effectively and promptly take countermeasures against the attack and contamination of the coastline by such oil bands.

• 국제초고층학회논문집
• /
• 제7권4호
• /
• pp.389-396
• /
• 2018

This paper presents a numerical investigation on the structural response of a multi-story building subjected to spreading multi-compartment fires. A recently proposed simple fire model has been used to simulate two spreading multi-compartment fire scenarios in a 10-story steel-framed office building. By assuming simple temperature rising and distribution profiles in the fire exposed structural components (steel beams, steel column and concrete slabs), finite element simulations using a three-dimensional structural model has been carried out to study the failure behavior of the whole structure in two multi-compartment fire conditions and also in a standard fire condition. The structure survived the standard fire but failed in the multi-compartment fire. Whilst more accurate fire models and heat transfer models are needed to better predict the behaviors of structures in realistic fires, the current study based on very simple models has demonstrated the importance and necessity of considering spreadingmulti-compartment fires in fire resistance design of multi-story buildings.

• 한국광학회지
• /
• 제18권2호
• /
• pp.155-161
• /
• 2007

본 논문에서는 GaN/InGaN 다중양자우물(MQW)의 청색 발광 다이오드(LED)에서의 3차원적인 전류 및 2차원적인 광 분포를 보여 주기 위해 새롭고 간단한 3차원 회로 모델링과 해석이 처음으로 제안되었으며 이를 실험적으로 검증하였다. LED의 회로 파라미터들은 금속 및 에피 박막의 저항과 다이오드만으로 이루어져 있으며 각각의 파라미터는 전송선 모델(TLM) 및 전압-전류의 특성으로부터 얻을 수 있다. 제안된 방법과 회로 파라미터를 상부로 발광하는(top-surface emitting) LED에 적용하여 금속 및 에피 박막의 각 저항 변화에 따라 활성층을 지나가는 전류 분포의 효과를 정량적으로 해석하였다. 그리고 제작된 청색 LED 소자의 발광 분포는 p-전극 주위에서 어두운 발광 분포를 보이는 해석 결과와 유사한 경향을 보여주었다.

• Journal of the Optical Society of Korea
• /
• 제16권4호
• /
• pp.349-353
• /
• 2012

Uniform spreading of injection current in light-emitting diodes (LEDs) is one of the crucial requirements for better device performances. It is reported that non-uniform current spreading leads to low output power, high current crowding, heating, and reliability degradation of the LED device. This paper reports on the effects of different surface and electrode geometries in the LEDs. To increase the output power of LEDs and reduce the series resistance, a rectangular-type LED (RT-LED) with a centered island cathode has been fabricated and investigated by comparison with a conventional LED (CV-LED). The performances of RT-LEDs were prominently enhanced via uniform current spreading and low current crowding. Performances in terms of increased output power and lower forward voltage of simulated RT-LEDs are much superior to those of CV-LEDs. Based on these results, we investigated the correlation between device geometries and optical characteristics through the fabricated CV and RT-LEDs. The measured output power and forward voltage of the RT-LEDs at 100 mA are 64.7% higher and 8% smaller compared with those of the CV-LEDs.

• 한국수자원학회논문집
• /
• 제32권1호
• /
• pp.83-94
• /
• 1999

대륙붕에서 부유사 하층밀도류는 양측이 수로에 제한을 받지 않기 때문에 주흐름방향인 종방향뿐만 아니라 횡방향으로도 자유롭게 흐른다. 횡방향흐름은 대륙붕 및 대륙붕사면을 따라 흐르는 밀도류의 종방향 도달거리를 크게 감축시킬 수 있다. 본 연구에서는 부유사 밀도류 대신에 염수를 이용한 밀도류 실험을 대형 탱크를 이용하여 실시하였고, 차원해석을 통하여 사면에서 밀도류의 흐름률에 관한 간단한 식을 개발하였다. 특성길이 및 특성시간은 유입부에서의 유량과 부력흐름률의 함수로 나타내었다. 유입부의 폭이 주어질 경우,개발된 흐름식을 사용하여 시간에 따른 밀도류의 최대폭과 종방향으로의 전파속도를 계산할 수 있다. 식에 의한 예측값과 관측값이 서로 잘 일치함을 보였다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.105-112
• /
• 2006

Liquefaction-induced lateral spreading has been the most extensive damage to pile foundations during earthquakes. However, a case of pile failure was reported despite the fact that a large margin of safety factor was employed in their design. This means that the current seismic design method of pile is not agreeable with the actual failure mechanism of pile. Newly proposed failure mechanism of pile is a pile failure based on buckling instability. In this study, failure behavior of pile embedded in liquefied soil deposits was analyzed considering lateral spreading and buckling instability performing 1g shaking table test. As a result, it can be concluded that the pile subjected to excessive axial loads ($near\;P_{cr}$) can fail by buckling instability during liquefaction. When lateral spreading took place in sloping grounds, lateral spreading increased lateral deflection of pile and reduced the buckling load, promoting more rapid collapse. In addition, buckling shape of pile was observed. In the ease of pile buckling, hinge formed at the middle of the pile, not at the bottom. And in sloping grounds, location of hinge got loiter compared with level ground because of the effects of lateral spreading.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2008년도 추계학술발표대회 및 제15회 신소재 심포지엄
• /
• pp.11.2-11.2
• /
• 2008

• 대한인간공학회지
• /
• 제26권4호
• /
• pp.135-142
• /
• 2007

Icon conveys symbolic information which they have become ubiquitous as main element of GUI. However, users often cannot intuitively understand its functional meanings. Icon has to be designed for users to easily understand functional meanings. In order to evaluate icon, the spreading activation model can be used to effectively understand the process of information retrieval. In asymmetric spreading activation model is that in the two nodes the degree of spreading activation is different according to direction. Thus, asymmetric spreading activation theory was performed evaluating the strength of association when users see visual image to associate their verbal meaning (visual image - verbal meaning pair) and users see verbal meaning to associate their visual image (verbal meaning - visual image pair). According to the direction, this study hypothesizes that the well-designed icons have symmetric relationship rather than asymmetric relationship between the two pairs. The strength of association is measured through the reaction time and the accuracy rate. In performing SAT (spreading activation test), the ten icons were selected as word processing software icons. After first SAT, newly designed icons were developed based on Korean mental model, and second SAT was conducted using them. The results showed that the accuracy rate of newly designed icon has been improved. Also there is significant difference of reaction time between current icons and newly designed icons. Well-designed icon is confirmed that the strength of association relationship arises symmetrically rather than asymmetrically between the two pairs. User centered icons could be designed by improving the strength of association between the two pairs. Asymmetric SAT evaluates the strength of the association between the visual image and the verbal meanings to contribute to the development of icon which it related to human's association structure.

• 대한기계학회논문집B
• /
• 제30권5호
• /
• pp.422-429
• /
• 2006

Resolved simulations are presented fur gravity current flows aiming at studying their spreading rate. The simulations are performed for two extreme configurations such as planar and cylindrical and for 3 different Grashof numbers: $10^5,\;1{\times}10^6\;and\;10^7$. Varying the size of the heavy fluid release, the study is performed for several phases of spreading, namely acceleration, slumping and inertial phases. For the simulations, efficient spectral multi-domain code is used. From the simulations results it is concluded that 2-D results predicts well the mean front velocity during the slumping phase, but fails to predict it during the inertial phase of spreading. It is also observed that the vortex dynamics of the flow is not reproduced well by the 2-D simulation.