• Environmental Engineering Research
• /
• v.18 no.4
• /
• pp.277-281
• /
• 2013

A dual-chamber microbial fuel cell (MFC) inoculated with Desulfovibrio desulfuricans and supplemented with lactate as an organic fuel was employed in this study. Biofilm formed on the anodic electrode was examined by scanning electron microscopy, revealing that the amount of biofilm was increased with repeated cycles of MFC operation. The maximum current production was notably increased from the first cycle ($1,310.0{\pm}22.3mA/m^2$) to the final cycle ($1,539.4{\pm}25.8mA/m^2$) of MFC run. Coulombic efficiency was also increased from $89.4%{\pm}0.2%$ to $98.9%{\pm}0.5%$. We suggest that the current production efficiency was related to the biomass of biofilm formed on the electrode, which was also increased as the MFC run was repeated. It was also found that D. desulfuricans, which colonized on the electrode, produced filaments or nano-pili. Nano-pili were effective for the attachment of cells on the electrode. In addition, the nano-pili provided a cell-to-cell link and stimulated the development of thicker electroactive biofilm, and therefore, they facilitated electron transfer to the anode. Conclusively, the biofilm of D. desulfuricans enhanced the current production in the MFC as a result of effective attachment of cells and electron transfer from the cell network to the electrode.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.5
• /
• pp.471-477
• /
• 2007

SCBF(Spherically Convergent Beam Fusion) device has been studied as a neutron source. Neutron production rate is a most important factor for the application of SCBF device and is proportional to the square of the ion current[1]. It is regarded generally that some correlations between the potential well structure and the ion current exist. In this paper, the ion current and potential distribution were calculated in a variety of grid cathode geometries using FEM-FCT method. Single potential well structure was certified inside the grid cathode. The deeper the potential well became, the higher the ion current due to the high electric field near the grid cathode became.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.7
• /
• pp.984-991
• /
• 2018

The beef industry is an important part of livestock and meat production in China. China ranks third in the world for beef production. With the rapid development of the Chinese economy, beef consumption has grown rapidly, and beef consumption has been increasing with rising per capita gross domestic production. However, the domestic beef industry in China has not been able to keep pace with growth in consumption, making China a net importer of beef from other countries. Moreover, the volume of production has increased little despite rising demand. The slowing of growth in beef production in recent years has led to a sharp rise in beef prices. Domestic beef production and consumption is restricted by a shortage of beef cattle inventory. The Chinese beef industry is facing many technical problems including transformation of traditional practices, feeding and management systems, and genetic improvement of cattle breeds. The long-term, sustainable development of the Chinese beef industry is an important issue for China.

• Journal of Veterinary Clinics
• /
• v.16 no.1
• /
• pp.163-176
• /
• 1999

The nuclear transplantation technique is known as the most potential and efficient method for producing large numbers of genetically identical animals from a single embryo and somatic cells. After Dolly was introduced in 1997, many scientists were amazed. A possibility came to a reality that live offspring could be produced with differentiated somatic cells from an adult animal. On the other side, many in the press and the sensationalists focused on the socially, ethically and scientifically unacceptable sides of the technology. In this article, the history, current status and prospects of the technological development of nuclear transplantation in mammals and its application to the production of cloned animals are described. For the efficient and successful production of cloned embryos by nuclear transplantation, the right selection, preactivation and micromanipulation of oocytes as capacious recipient cytoplasm, the adequate and benefitial preparation of multiple totipotent embryonic and somatic cells as donor nuclei, fusion of them and in vitro production of cloned embryos are very critical. Recently the overall efficiency of production of cloned embryos and offspring in livestock has been much improved. Cloning will also be a more efficient, faster and useful way of creating transgenic fetuses for gene therapies, gene pharming, organs for xenotransplantation by preselection and mass production of transgenic embryos and consequently improving the production efficiency in transgenic animals. Further technical development of nuclear transplantation will enable large-scale production of cloned livestock and in near future the commercial cloning of animals will become a reality.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.55
• /
• pp.51-71
• /
• 2000

A case of company manufacturing industrial valves is studied. To survive the fierce competition in the low-volume, high-complexity production environment, the company needs accurate information on the cost of its products. Current cost accounting system which allocates production costs based on the weights of intermediates and final products cannot provide accurate cost information that managers really need. Data on the company's cost structure and production processes were reviewed and managers were interviewed before problems with the current costing system were identified. Activity-based costing (ABC) system as well as an improved traditional costing system is considered to replace the current system. A prototype of ABC system is developed to better represent the relationships among the cost drivers, activities, and products.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2531-2533
• /
• 2001

This paper describes a low noise and high efficiency analog-digital switching mixed mode battery charger for production facilities of Li-Ion batteries. The requirements for battery chargers for production facilities are very strict. The accuracy of output voltage and output current should be below 0.1% with very low ripple current. Therefore analog type linear regulators are widely used for battery charger in spite of their inefficiency and bulkiness. We combined linear regulator as a voltage source with digital switching converter as a dependent current source. Low current ripple and high accuracy are obtained by linear regulator while high efficiency is achieved by digital switching converter. Experimental results show that proposed method has 0.1% ripple and 90% efficiency at an output current of 1A for a battery voltage of 4V.

• Journal of Korea Society of Industrial Information Systems
• /
• v.29 no.3
• /
• pp.41-49
• /
• 2024

In this paper, we validate simulation results for the design optimization of a Superconducting Fault Current Limiter (SFCL) intended for use in Medium Voltage Direct Current systems (MVDC). With the increasing integration of renewable energy and grid connections, researchers are focusing on medium-voltage systems for balancing energy in new and renewable energy networks, rather than traditional transmission or distribution networks. Specifically, for DC distribution networks dealing with fault currents that must be rapidly blocked, current-limiting systems like superconducting current limiters offer distinct advantages over the operation of DC circuit breakers. The development of such superconducting current limiters requires finite element analysis (FEM) and an extensive design process before prototype production and evaluation. To expedite this design process, the design outcomes are assimilated using a Reduced Order Model (ROM). This approach enables the verification of results akin to finite element analysis, facilitating the optimization of design simulations for production and mass production within existing engineering frameworks.

• The Journal of Fisheries Business Administration
• /
• v.46 no.2
• /
• pp.59-74
• /
• 2015

This study aims to estimate optimal harvesting production, fishing efforts, and stock levels of yellow croaker caught by the offshore Stow Net and the offshore Gill Net fisheries using the current value Hamiltonian method and the surplus production model. As analyzing processes, firstly, this study uses the Gavaris general linear model to estimate standardized fishing efforts of yellow croaker caught by the above multiple fisheries. Secondly, this study applies the Clarke Yoshimoto Pooley(CY&P) model among the various exponential growth models to estimate intrinsic growth rate(r), environmental carrying capacity(K), and catchability coefficient(q) of yellow croaker which inhabits in offshore area of Korea. Thirdly, the study determines optimal harvesting production, fishing efforts, and stock levels of yellow croaker using the current value Hamiltonian method which is including average landing price of yellow croaker, average unit cost of fishing efforts, and social discount rate based on standard of the Korean Development Institute. Finally, this study tries sensitivity analysis to understand changes in optimal harvesting production, fishing efforts, and stock levels of yellow croaker caused by changes in economic and biological parameters. As results drawn by the current value Hamiltonian model, the optimal harvesting production, fishing efforts, and stock levels of yellow croaker caught by the multiple fisheries were estimated as 19,173 ton, 101,644 horse power, and 146,144 ton respectively. In addition, as results of sensitivity analysis, firstly, if the social discount rate and the average landing price of yellow croaker continuously increase, the optimal harvesting production of yellow croaker increases at decreasing rate and then finally slightly decreases due to decreases in stock levels of yellow croaker. Secondly, if the average unit cost of fishing efforts continuously increases, the optimal fishing efforts of the multiple fisheries decreases, but the optimal stock level of yellow croaker increases. The optimal harvest starts climbing and then continuously decreases due to increases in the average unit cost. Thirdly, when the intrinsic growth rate of yellow croaker increases, the optimal harvest, fishing efforts, and stock level all continuously increase. In conclusion, this study suggests that the optimal harvesting production and fishing efforts were much less than actual harvesting production(35,279 ton) and estimated standardized fishing efforts(175,512 horse power) in 2013. This result implies that yellow croaker has been overfished due to excessive fishing efforts. Efficient management and conservative policy on stock of yellow croaker need to be urgently implemented.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.262-262
• /
• 2012

A multi-purpose cyclotron, MC50 has been operated to provide multi-ions of proton, deuteron and alpha at Korea Institute of Radiological and Medical Sciences (KIRAMS). Neutron is also produced through the (p,n) nuclear process with a Be target. However, a wide spectrum of current of ions is requested by beam users for carrying their various application fields. Therefore a simulation study is requested on the design of an axial injection system for high current proton and alpha beam extraction for radio-isotope productions and scientific researches. The purpose of this study is seeking a relatively simple method for the MC50 having higher alpha beam capability and also improving proton and deuteron beams currently used. We are considering two possibilities to improve the internal ion source and to install a new external axial injection system. The external injection system will be consisted of an Einzel lens, a steering magnet, a buncher, and a glazer lens placed in front of an inflector, which is located at the center of the main magnet.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.8_spc
• /
• pp.1266-1274
• /
• 2019

This paper presents a review of dairy goat production in sub-Saharan Africa (SSA) from 2010- 2017, its current state, constraints and prospects for research and development. Since the introduction of dairy goats in SSA in pre-colonial times, their populations have continued to increase due to declining land size as a result of land fragmentation and increasing demand for goat milk. The current goat population in SSA is 372,716,040 head of which only 15.98% used for milk production. Populations in the Eastern and Western regions of SSA have shown an increasing trend from 2010 to 2017. The Southern Africa goat population is on the decline at an annual rate of about 1.77% whereas Central Africa has had a constant goat population within the same period. Eastern Africa reported the highest increase in the population of goats used for milk production. Milk production was highest in Eastern Africa and lowest in Southern Africa. However, dairy goat productivity remained constant in the Eastern region throughout the review period. Dairy goats are mainly raised under smallholder mixed crop-livestock systems. To enhance the development of the dairy goat, concerted efforts should be made to alleviate the constraints that stifle its growth. These constraints can be categorized into nutrition and feeding, breeding and reproduction, diseases, parasites, climate change, and underdeveloped dairy goat products market. Effective management of dairy goats requires a holistic approach and there is the need to expand the markets by further sensitization on the nutritional and medicinal advantages of dairy goat products. In order to achieve rapid development in the dairy goat sub sector, research and development initiatives should be directed towards alleviating the hurdles in nutrition and feeding, breeding, animal health and resilience as well as dairy goat markets.