• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.228.2-228.2
• /
• 2010

In this work, the hydrogen production costs of the nuclear energy sources are estimated in the necessary input data on a Korean specific basis. G4-ECONS was appropriately modified to calculate the cost for hydrogen production of HTE process with Very High Temperature nuclear Reactor (VHTR) as a thermal energy source rather than the LUEC (Levelized Unit Electricity Cost). The general ground rules and assumptions follow G4-ECONS. Through a preliminary study of cost estimates, we wished to evaluate the economic potential for hydrogen produced from nuclear energy, and, in addition, to promptly estimate the hydrogen production costs for an updated input data for capital costs. The estimated costs presented in this paper show that hydrogen production by the VHTR could be competitive with current techniques of hydrogen production from fossil fuels if $CO_2$ capture and sequestration is required. Nuclear production of hydrogen would allow large-scale production of hydrogen at economic prices while avoiding the release of $CO_2$. Nuclear production of hydrogen could thus become the enabling technology for the hydrogen economy. The major factors that would affect the cost of hydrogen were also discussed.

• Journal of Korean Society of Rural Planning
• /
• v.25 no.3
• /
• pp.67-75
• /
• 2019

Agricultural production facilities that have been established to support improving food production, farm income, and reduction of farming time have remarkable achievements as value-neutral devices or infrastructures, but recently they are pointed out as a factor that hinders landscape by changing the contextual values of rural area. Despite this timelessness, research on the landscape design of agricultural production facilities has not been conducted until now. Based on these research necessities, this study aims to improve the process of reviewing the landscape of agricultural production facilities by analyzing the impact of activities, policies, plans. The results of this study are as follows. First, the analysis of the literature and the related data were carried out. This presents the structural limitations of why landscape review is difficult in the process of reviewing plans and the limitations of current landscape laws, deliberations, and plans. The process of reviewing the plan has formed a functionally oriented closed network, and the government policy does not properly control the landscape design of agricultural production facilities. From the viewpoint of the study, results can be used as basic data for the study of the lack of agricultural production facilities and landscape.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.30-37
• /
• 2020

In the building construction, the steel-frame work occupies an important position in terms of structure, cost and quality. Especially in Japan, steel frames have traditionally been the main structure of many buildings. For steel-frame works in such positions, this paper investigates an existing steel fabricator to clarify the actual conditions of design decision making process and management method in steel production process. This study focuses on a steel fabricator (Company M in the following sentences), whose main market is Japan and which has facilities in Thailand, China, and Japan. Company M uses QR codes to control the production status of products, and exchanges all information between inside and outside the company via specialized departments in the form of documents. The authors have already analyzed the relationship between production lead time and defect rate based on actual project data at Architectural Institute of Japan in 2016. In 2019, we expressed the process from the confirmation of the design information of the current steel frame to the production by WBS, and clarified the relationship between the production lead time and steel frame product quality structurally. In this paper, the authors reoport the progress of the survey conducted so far, the positioning of the collected data, and the future survey policy.

• Journal of the Korean Geographical Society
• /
• v.50 no.2
• /
• pp.165-183
• /
• 2015

It is well known that, since the 15th century, the amount of soil loss in our country due to change in land use by human has increased more rapidly than ever before. However we cannot answer the question 'How long can the soil persist under the current rates of soil loss?', because it was difficult to quantify the soil production rate. With the advancement of accelerated mass spectrometry, the attempt to quantify rate of soil production and derive soil production function succeeded, and recently it was also applied into the Daegwanryeong Plateau. Here we introduce the principles for quantifying soil production and deriving soil production function using terrestrial cosmogenic nuclides, and then compare the soil production rates from the plateau with soil loss data after the late 20th century, and finally estimate how long the soil can persist. Averaged soil production rate since the Holocene derived from the plateau is revealed as ${\sim}0.05[mm\;yr^{-1}]$, and, however, the recent soil loss rate of intensively used farmlands at the same region is up to sixty times greater than the soil production rate. Thus, if current land use system is maintained, top soils on the cultivated lands over hillslopes especially in upland areas are expected to disappear within several decades at the earliest.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1729-1734
• /
• 2016

The surface inspection of a steel billet is a common practice in the steel manufacturing process prior to hot rolling to produce steel wire for tire cord. This billet surface inspection is an important process because flaws on the surface may cause major failures during the product manufacturing phase. This paper presents a computer simulation based on a finite element method for a magnetic flaw detector with a function of the current intensity, the number of coil turns, and the billet proceeding speed during the production phase based on the typical condition of conventional apparatus. Based on the simulation result, the magnitude of the electromagnetic field on the surface diminished with distance from the electromagnet. In addition, the increased current intensity and the increased number of coil turns actually induced a stronger electromagnetic field on the billet surface. On the other hand, the proceeding speed of a billet in its production line had no significant effects. The result in this study may assist to reduce trial and error and to minimize the opportunity costs during the optimization process by applying the findings of this study into the operation condition in the steel billet production line.

• The Journal of Fisheries Business Administration
• /
• v.38 no.1 s.73
• /
• pp.1-17
• /
• 2007

This study is aimed at investigating optimum level of payments in the direct payment program for aquaculture extruded pellets both theoretically and practically by analyzing the effects on production and income in accordance with Green Box conditions of WTO Agreement on Agriculture. In particular, by analyzing both effects on production and income, it evaluates and compares payments affecting to the level of production and income, respectively. Analysis results indicate that the optimum level of payments in the direct payment program for aquaculture extruded pellets is determined by the growth rate of farmed fish, farming period, price and volume of extruded pellets, and additional amount of cost increase and decrease. Suppose that growth rates of farmed fish by extruded pellets(EP) and raw fish - based moist pellets(MP) are the same, it reveals the optimum level of payment should be lowered from the current level of payment. However, when the growth rate of farmed fish by EP is lower than that by MP, the optimum level of payment should be raised from the current level and total amount of payments by area should be increased as well.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1495-1502
• /
• 2017

The Theory of operation of switched reluctance motors (SRM) depends on the reluctance torque, where energy is transferred to stator winding only. Although its construction is simple, the electrical design is complex, due to the switching configuration needed to deliver power to stator coils. However, because of the nonlinearly of magnetic circuit, SRM has torque ripple. This paper proposes a new strategy to drive SRM from a single-phase AC supply. Each stator winding is connected to AC-DC or AC-AC converters, which is called branch. All branches are connected in parallel to a single-phase AC supply. A shaft encoder allows current production in stator winding during the positive torque production region and terminates it during the negative torque production region. A magnetic flux is produced between stator poles when current is supplied from AC supply to stator coil and repeats many cycles as long as the rate of change of stator inductance is positive. Different possibilities for the configurations of AC-AC or AC-DC converters are introduced to drive SRM from the single-phase AC supply. A case study is presented for a SRM fed from AC supply through semi-controlled AC-DC converter is presented. A simulation model is introduced and verified by experimental rig for two-phase SRM.

• Weed & Turfgrass Science
• /
• v.6 no.4
• /
• pp.283-291
• /
• 2017

Zoysiagrass has been used in Korea as a native grass. Informations on distributions, classifications, breeding efforts and outputs, current production and uses of zoysiagrasses in Korea are summarized. During past a few decades, collection of naturally growing zoysiagrass ecotypes has been continued, followed by evaluation, selection and cross-pollination. Classification efforts using important morphological, biochemical traits and DNA polymorphisms resulted in the several suggestions of grouping zoysiagrass species and varieties. Zoysia japonica consistently form separate group, while Zoysia sinica and Zoysia macrostackya have been separately or inter-mixed. Z. matrella with some variations frequently grouped separately but with some similarity with Z. tenuifolia, which was recently renamed as Z. pacifica. Hybrid types of zoysiagrasses were frequently found in Korea. New varieties such as 'Kunhee' and 'Green Ever' etc. were bred by ecotype selections, while 'Senock', 'Semil', 'Millock' were bred through pollination. Molecular approaches were also used to introduce beneficial genes into zoysiagrasses with no practical outputs by legal regulations. Currently popular varieties are inter-specific hybrid types such as 'Anyang' and other local zoysiagrasses as well as common zoysiagrass (Zoysia japonica) Production area in Korea was estimated as 2,947 ha with increasing problems of mixed or contaminated species and varieties.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.7 no.1
• /
• pp.1-4
• /
• 2003

Sericulture is a traditional agro-industry, which involves mulberry cultivation and silkworm rearing, has made great contributes to the human civilization. With the development of national economy and modem technology, mulberry and silkworm are being used to develop products with functionality besides the traditional cocoon production in China. In this paper, we brief the current developing situation of sericultural byproducts with functionality in the following aspects. (1) Functional products from silkworm larvae: silkworm powder, white muscardine silkworm, isolation and purification of anti-bacterial proteins from the larvae and production of medically valuable substances by Bombyx mori nuclear polyhedrosis virus (BmNPV) vector. (2) Utilization of silkworm feces: for pillow and for isolation of chlorophyll etc. (3) Production of valuable Chinese traditional medicine like Cordyceps sinensis with pupae, functional utilization of pupa protein and chitin. (4) Silk as additives to cosmetics, silk food and medical materials. (5) Functional utilization of mulberry: cultivation of edible fungus on mulberry shoots as medium, mulberry fruit drinks, mulberry tea, etc. The prospect of sericultural byproduct industry in China is also discussed.

• Journal of the Korean Society of Costume
• /
• v.64 no.6
• /
• pp.33-46
• /
• 2014

The purpose of this study is to present basic data for the standardization of the sizing system for children's wear by investigating the current production and sizing system of Korean children's wear brands. The result of conducting a survey of 20 brands show the following: first, regarding the age bracket of Korean children's wear, it ranged from 3~15 years old. Most of the brands divided up the sizes into 4 or 5 different groups. Second, the utilization of a bodice basic pattern was low during the manufacturing of a pattern, and the basic pattern had been used for the item. Third, the designation of garment sizes were done using height or height-chest measurement or height-waist measurement. Fourth, the brands used the smallest size as the basic size in most cases. Most of the brands had similar deviations for any grading deviations. In conclusion, it appears necessary to restructure the unity of size designation and the sizing system in order to establish the sizing system of children's wear, which features diverse age brackets and various body types.