• Journal of Korean Physical Therapy Science
• /
• v.29 no.2
• /
• pp.28-37
• /
• 2022

Background: The purpose of this study was to investigate the effects of differences in the tension of Kinesio tape applied to the tibialis anterior muscle on muscle strength, joint range of motion and balance of ankle joint in young adults. Design: Randomized Controlled Trial. Methods: 41 young college students participated in this study. And the subjects were allocated randomly to two group. The experimental group had a tension difference (10%G, n=20). And there was no difference in tension in the control group (0%G, n=21). Jtech power track II, goniometer, and Biorescue were used to measure muscle strength, joint range of motion and balance. The paired t-test was performed to examine the differences within the groups before and after taping, and the independent t-test was performed to examine the differences between the groups. Result: 1) As a result of measuring muscle strength of each group, all measurements except 0%G of plantar flexion showed insignificant results. 2) Measurement of joint range of motion each group showed that neither 0%G nor 10%G was significant. 3) As a result of measuring the baladncing ability of each group there was a significant decrease in length, and average speed of the balancing capability (p<.05). 4) Comparisons between groups showed significant differences in the area among balance capability (p<.05). Conclusions: Based on these findings, the tension difference of Kinesio tape applied to the tibialis anterior muscle shows little effect on the muscle strength, range of motion, and balance of ankle joints. Given the current lack of research on the tension of kinesio tapes many studies are needed in the future to establish clear theories.

• Journal of Appropriate Technology
• /
• v.5 no.2
• /
• pp.70-81
• /
• 2019

The garment industry is one of the most labor-intensive manufacturing industries, with its sewing process relying almost entirely on manual labor. Its costs highly depend on the efficiency of this production line and thus is crucial to determine the production rate in real-time for line balancing. However, current production tracking methods are costly and make it difficult for many Small and Medium-sized Enterprises (SMEs) to implement them. As a result, their reliance on manual counting of finished products is both time consuming and prone to error, leading to high manufacturing costs and inefficiencies. In this paper, a production tracking system that uses the sewing machines' energy consumption data to track and count the total number of sewing tasks completed through Convolutional Neural Network (CNN) classifiers is proposed. This system was tested on two target sewing tasks, with a resulting maximum classification accuracy of 98.6%; all sewing tasks were detected. In the developing countries, the garment sewing industry is a very important industry, but the use of a lot of capital is very limited, such as applying expensive high technology to solve the above problem. Applied with the appropriate technology, this system is expected to be of great help to the garment industry in developing countries.

• 대한공업교육학회지
• /
• v.34 no.2
• /
• pp.1-19
• /
• 2009

The goal of this study is to examine the status quo of industrial-educational cooperation in Technical high schools. Based upon the findings of the current conditions, this study ultimately aims to propose methods through which more active industrial-educational cooperation can be stimulated. The methods chosen for this study are reference research and surveys. The survey was conducted by imposing complete enumeration on the targeted high schools that specialize in industry related fields. The survey targets were the directions of academic affairs, the directions of practical affairs, and the directors of the educational curriculum of each school.The research results are as follows: First, the teachers recognize the necessities of having opportunities to gain specific skills in different industrial fields, having chances to get stable employment, and securing the industrial institution's competitiveness through the customized nurturing and supply of human resources as the primary goals of industrial-educational cooperation. Second, the teachers express the similar opinion that industrial-educational cooperation in their current system is inappropriate to achieve their goals. Third, the teachers claim that an educational curriculum that emphasizes industrial educational cooperation must be developed and managed. Fourth, it was found that when schools plan their educational curriculum, they often do not implement the requests from industrial institutions. Fifth, major educational program implement methods that meet the requests of the industrial institutions include field trips or the introduction of other field-based experience learning programs, the application of customized curriculums based on industrial-educational cooperation, and the invitation of industrial-educational personnel as teachers to school environments. Sixth, it was concluded that educational institutions need to proactively seek companies for cooperation; they need to support, develop, and manage school programs that are based on industrial-educational cooperation; and finally, institutions need to enthusiastically participate in the government's vocational education policies that are founded upon industrial-educational cooperation. Seventh, the enforcement of selective curriculum for the benefit of diversifying the educational program; the pursuit of balancing the specialized curriculum through shedding the national educational level provided within the regular curriculum; and the establishment of related amendments on the national level to provide effective industrial-educational cooperation have been identified as the vital factors that can develop the educational programs within high schools specializing in industry and that are closely related to industrial educational cooperation.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.12
• /
• pp.1098-1125
• /
• 2000

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 1998 and 1999 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. 1) A review of the recent studies on fluid flow, turbomachinery and pipe-network shows that many experimental investigations are conducted in applications of impingement jets. Researches on turbulent flows, pipe flows, pipe-networks are focused on analyses of practical systems and prediction of system performance. The results of noise reduction in the turbomachinery are also reported. 2) A review of the recent studies on heat transfer analysis and heat exchanger shows that there were many papers on the channel flow with the application to the design of heat exchanger in the heat transfer analysis. Various experimental and numerical papers on heat exchanger were also published, however, there were few papers available for the analysis of whole system including heat exchanger. 3) A review of the recent studies on heat pump system have focused on the multi-type system and the heat pump cycle to utilize treated sewage as the heat source. The defrosting and the frosting behaviors in the fin-tube heat exchanger is experimentally examined by several authors. Several papers on the ice storage cooling system are presented to show the dynamic simulation program and optimal operation conditions. The study on the micro heat pipes for the cooling of high power electronic components is carried out to examine the characteristics of heat and mass transfer processed. In addition to these, new type of separate thermosyphon is studied experimentally. 4) The recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. New systems operating with natural refrigerants are drawing lots of attention. In addition to these, evaporation and condensation heat transfer characteristics of traditional and new refrigerants are investigated for plain tubes and also for microfin tubes. Capillary tubes and orifice are main topics of research as expansion devices and studies on thermophysical properties of new refrigerants and refrigerant/oil mixtures are widely carried out. 5) A review of the recent studies on absorption cooling system shows that numerous experimental and analytical studies on the improvement of absorber performance have been presented. Dynamic analysis of compressor have been performed to understand its vibration characteristics. However research works on tow-phase flow and heat transfer, which could be encountered in the refrigeration system and various phase-change heat exchanger, were seemed to be insufficient. 6) A review of recent studies on duct system shows that the methods for circuit analysis, and flow balancing have been presented. Researches on ventilation are focused on the measurement of ventilation efficiency, and variation of ventilation efficiency with ventilation methods by numerous experimental and numerical studies. Furthermore, many studies have been conducted in real building in order to estimate indoor thermal environments. Many research works to get some information for cooling tower design have been performed but are insufficient. 7) A review on the recent studies on architectural thermal environment and building mechanical systems design shows that thermal comfort analysis is sitting environment, thermal performance analysis of Korean traditional building structures., and evaluation of building environmental load have been performed. However research works to improve the performance of mechanical system design and construction technology were seemed to be insufficient.

• The Korean Society of Law and Medicine
• /
• v.23 no.1
• /
• pp.37-80
• /
• 2022

By analyzing informed consent and the refusal of emergency medical treatment (called patient dumping) under the current Emergency Medical Service Act, this study suggests that an emergency medical professional is only liable for patient dumping if their duty to protect the patient's life takes precedence over the patient's right to self-determination. In emergency medical situations, as in general medical situations, medical treatment should be performed after the emergency medical professional informs the patient about the medical treatment, including its necessity and methods, and obtains consent from the patient. Refusing or evading the performance of emergency medical services on the excuse of the informed consent not considering a waiver or alteration of informed consent requirements without reasonable reasons violates the Emergency Medical Service Act and thus makes an emergency medical professional liable to administrative disposition or criminal penalty. In other words, depending on the existence of a waiver of alteration of the informed consent, patient dumping may be established. If the patient is a minor or has no decision-making ability, and their legal representative makes a decision against the patient's medical interests, the opinion of the legal representative is not unconditionally respected. A minor also has the right to decide over their body, and the decisions of their legal representatives should be in the patient's best interests. If the patient refuses treatment, in principle, the obligation of life protection of emergency medical professionals is the top priority. However, making these decisions in the aforementioned situations in the emergency medical field is difficult because of the absence of explicit regulations regarding these exceptional problems. This study aims to organize the following precedents of the Supreme Court of Korea. The court states that, when balancing the conflicting interests between the duty to provide emergency medical service and the duty to inform is unavoidable for emergency medical professionals, they should put the duty to protect the patient's life ahead of the duty to inform if the patient's life matters. Exceptionally, when a patient has seriously considered whether they should receive treatment before the emergency medical situation, their right to self-determination can be considered equal to the obligation of emergency medical professionals to provide emergency medical treatment. This research also suggests that an amendment of the Emergency Medical Service Act should include the following. First, the criteria for determining the decision-making ability of emergency patients should consist of medical content. Second, additional consent from a medical professional is unnecessary for first-aid treatment. Finally, new provisions for emergency medical obligations for minors, new provisions for the decision standard when there are conflicting opinions about the treatment of a patient, and new penalty provisions for professionals who suspend emergency medical examinations and treatments need to be established.

• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.2335-2347
• /
• 2023

As medical facilities are usually built at urban areas, special concrete aggregates and evaluation methods are needed to optimize the design of concrete walls by balancing density, thickness, material composition, cost, and other factors. Carbon treatment rooms require a high radiation shielding requirement, as the neutron yield from carbon therapy is much higher than the neutron yield of protons. In this case study, the maximum carbon energy is 430 MeV/u and the maximum current is 0.27 nA from a hybrid particle therapy system. Hospital or facility construction should consider this requirement to design a special heavy concrete. In this work, magnetite is adopted as the major aggregate. Density is determined mainly by the major aggregate content of magnetite, and a heavy concrete test block was constructed for structural tests. The compressive strength is 35.7 MPa. The density ranges from 3.65 g/cm³ to 4.14 g/cm³, and the iron mass content ranges from 53.78% to 60.38% from the 12 cored sample measurements. It was found that there is a linear relationship between density and iron content, and mixing impurities should be the major reason leading to the nonuniform element and density distribution. The effect of this nonuniformity on radiation shielding properties for a carbon treatment room is investigated by three groups of Monte Carlo simulations. Higher density dominates to reduce shielding thickness. However, a higher content of high-Z elements will weaken the shielding strength, especially at a lower dose rate threshold and vice versa. The weakened side effect of a high iron content on the shielding property is obvious at 2.5 µSv=h. Therefore, we should not blindly pursue high Z content in engineering. If the thickness is constrained to 2 m, then the density can be reduced to 3.3 g/cm³, which will save cost by reducing the magnetite composition with 50.44% iron content. If a higher density of 3.9 g/cm³ with 57.65% iron content is selected for construction, then the thickness of the wall can be reduced to 174.2 cm, which will save space for equipment installation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.52 no.1
• /
• pp.71-86
• /
• 2024

Despite the increasing importance of urban parks' ecological functions in dealing with the climate crisis, ecological parks are not clearly defined in Korea's legal system. Numerous ecological parks created nationwide cannot be systematically designated and managed due to various legal bases and varying management authorities. It is important to clarify the legal status of ecological parks in order to lead the ecological paradigm shift of urban parks and to improve the natural park system for a comprehensive and integrated approach to protect the national ecosystem. To this end, related laws were analyzed to identify problems and to draw directions for legislative improvement. Through the literature review of relevant laws, acts, and ordinances, six major directions for improvement were suggested based on the analysis of problems. First, the legal status of ecological parks in the administrative dichotomy of the current park system is ambiguous, and ecological parks should be clarified through the revision of park-related laws. Second, an ecological park can be defined as a sustainable park created and managed in an ecological manner, promoting the protection and restoration of the ecosystem, conservation, and promotion of biodiversity, and balancing nature observation, ecological learning, and leisure activities. Third, the role of the state and local governments should be systematically revised to lead to a new park planning and management model through new governance. Fourth, since the characteristics of ecological parks are affected by individual laws, the possibility of overlapping ecological parks for other uses should be allowed. Fifth, detailed guidelines and standard ordinances need to be enacted to meet the goals, principles, and facilities of ecological parks. Lastly, along with the revision of the laws, ordinances by local governments also need to be more concrete. This study, which tracks various legal realities related to ecological parks, can contribute to policymaking that can systematize the foundation for the creation of ecological parks to preserve nationwide ecosystems and provide citizens with opportunities to experience and learn about nature.