• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.280-282
• /
• 2005

This paper proposes a simple MPPT control scheme of a Current-Control-Loop Error system Based that can be obtains a lot of advantage to compare with another digital control method, P&O and IncCond algorithm, that is applied mostly a PV system. An existent method is needed an expensive processor such as DSP that calculated to change the measure power of a using current and voltage sensor at the once. Therefore, it is applied a small home power generation system that required many expenses. But, a proposed method is easy to solve the cost reduction and power unbalance problems that it is used by control scheme to limit error of a current control of common sensor. This proposed algorithm had verified through a simulation and an experiment on battery charger using PIC that is the microprocessor of a low price.

• 전기전자학회논문지
• /
• 제24권4호
• /
• pp.1129-1135
• /
• 2020

배터리를 사용함에 따라 노화가 진행되면 배터리의 충전 가능 용량을 나타내는 State of Health(SoH)가 줄어들게 된다. 배터리 모니터링 시스템(BMS)에서 SoH를 추정하는 것이 매우 중요하며, 이를 위해 배터리 내부 저항을 측정하는 방법이 많이 사용된다. 일반적으로 배터리에 특정한 주파수의 전류원을 인가하고 전압응답을 측정하여 내부저항을 연산한다. 충전기가 동작할 경우 전압응답에 충전 고조파 잡음이 발생하여 저항 측정의 정확도가 떨어진다. 본 논문에서는 충전잡음의 영향을 제거하기 위하여 강인한 배터리 내부저항 측정 알고리즘을 제안하였다. 전류원 신호와 전압응답 신호를 일정한 주기 동안 적분하여 잡음을 제거하는 방법으로 우수한 정확도와 안정된 연산결과를 보였다. 무정전 전원장치용 BMS에 적용하여 제안한 방법의 유용함을 입증하였다.

• Journal of Electrochemical Science and Technology
• /
• 제9권3호
• /
• pp.184-194
• /
• 2018

In this paper, we propose a rapid-charging system for the lithium-ion battery (LIB) packs used in electric forklifts. The battery offers three benefits: reduced charge time, prolonged battery life, and increased charging efficiency. A rapid-charging algorithm and DC/DC converter topology are proposed to achieve these benefits. This algorithm is developed using an electrochemical model, which controls the maximum charging current limit depending on the cell voltage and temperature. The experimental use of a selected 18650 LIB cell verified the prolongation of battery life on use of the algorithm. The proposed converter offers the same topological merits as a conventional resonant converter but solves the light-load regulation problem of conventional resonant converters by adopting pulse-width modulation. A 6.6-kW converter and charging algorithm were used with a forklift battery pack to verify this method's operational principles and advantages.

• 산업기술연구
• /
• 제40권1호
• /
• pp.13-18
• /
• 2020

Lithium-ion batteries have a small volume, light weight and high energy density, maximizing the utilization of mobile devices. It is widely used for various purposes such as electric bicycles and scooters (e-Mobility), mass energy storage (ESS), and electric and hybrid vehicles. To date, lithium-ion batteries have grown to focus on increasing energy density and reducing production costs in line with the required capacity. However, the research and development level of lithium-ion batteries seems to have reached the limit in terms of energy density. In addition, the charging time is an important factor for using lithium-ion batteries. Therefore, it was urgent to develop a high-speed charger to shorten the charging time. In this thesis, a discharger was fabricated to evaluate the capacity and characteristics of Li-ion battery pack which can be used for e-mobility. To achieve this, a smart discharger is designed with a combination of active load, current sensor, and temperature sensor. To carry out this thesis, an active load switching using sensor control circuit, signal processing circuit, and FET was designed and manufactured as hardware with the characteristics of active discharger. And as software for controlling the hardware of the active discharger, a Raspberry Pi control device and a touch screen program were designed. The developed discharger is designed to change the 600W capacity battery in the form of active load.