• Textile Coloration and Finishing
• /
• v.24 no.3
• /
• pp.213-220
• /
• 2012

In this study, we investigated the effect of natural vegetable treatment agent on the bleaching and damage of human hair during permanent wave formation. The vegetable treatment agent was prepared by fermenting the mixture of tea leaves (10g), black rice (100g), black bean (100g), corn (100g), malt (50g), and water(500g) at room temperature for 1 week. The degree of bleaching and damage was checked by Munsell value 'L' and morphological changes of hair in FE-SEM. When the hair was bleached, the Munsell value 'L' was almost same regardless of adding the vegetable treatment to the bleaching solution. But when the hair was permanently waved, the curl formation ability was high and the damage was low in the case of adding the vegetable treatment. This means that the vegetable treatment covers the scale of hair and protects the hair from the chemicals.

• Transactions of Materials Processing
• /
• v.22 no.1
• /
• pp.30-35
• /
• 2013

In this study, springback amounts of an S-rail are quantitatively compared according to the hardening model using a finite element simulation for the stamping process with high strength steels. For comparison of the hardening models, two types of hardening models were investigated. The two models were isotropic hardening and kinematic hardening. For the analysis with kinematic hardening, the Yoshida-Uemori model was selected. Five kinds of springback modes were measured at designated sections and a comparison was made between the experiment and the analyses with two types of hardening models. The analysis results show that the springback in the flange and the wall curl are predicted more accurately with a kinematic hardening model.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.3
• /
• pp.37-43
• /
• 2016

Various mechanical and chemical pretreatment methods including alkali treatment, pre-beating, enzyme treatment and oxidation treatment have been used to reduce the production energy of the microfibrillated cellulose (MFC). Among them, alkali swelling can be helpful to reduce the energy consumption because the internal bonding between fibrils could be weakened. In this study, dimethyl sulfoxide (DMSO) was used as a cosolvent to improve alkali pretreatment efficiency and the effects of NaOH concentration during NaOH-DMSO swelling on changes in fiber characteristics of softwood bleached kraft pulp (SwBKP) were elucidated. For alkali treatment in H2O-DMSO solvents, fiber length were decreased with increasing NaOH concentration while fiber width, curl and WRV were increased. WRV began to increase at 8% NaOH solution. In addition, above 8% concentration of NaOH, crystalline structure of pulp fibers converted from cellulose II to cellulose III by DMSO cosolvent. Comparing the previous results with this study, it was shown that DMSO cosolvent could promote swelling of pulp fibers and thus reduce NaOH concentration for the maximum swelling of fibers.

• Korean Journal of Human Ecology
• /
• v.15 no.1
• /
• pp.129-139
• /
• 2006

The purpose of this study is to compare the hairstyles between Korean and Australian women, who have different individual hair characteristics, social backgrounds, and culture from each other. Data were collected through a survey of 208 Australian females and 392 Koreans. Frequency analysis, t-test, and two-way ANOVA were used to analyze the data. The results are as follows: Korean and Australian women maintain a hairstyle for six months or less in most of the cases. They preferred a hairstyle with bang, and the elderly especially a shorter hair length. Choosing their hairstyles depended on such factors as hair length, dyeing, form of face, harmony with clothing, and social status. There was no difference, however, in a preferred hair length. Korean women possessed brown and black hair colors in a descending order, whereas Australians light blonde and brown in a descending order as well. There was a big difference in the preference for a permanent wave. Korean women preferred to give a volume or curl to their hair, while Australians wanted to have a straight hair. According to the study on a hairstyle behavior, it was found that there were differences in fashion and individuality between two countries and also in dependency among age groups, whereas no differences existed in beauty.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.4
• /
• pp.73-81
• /
• 2006

The purpose of this study was to investigate the effects of strength training on knee joint torque during walking in an adolescent with trisomy-21 Down syndrome. One adolescent with Down syndrome and one normal child participated in this study. Strength training consisted of eight exercises: squat, hamstring curl, hip adduction, hip abduction, knee extension, toe raise, sit-ups, and hyperextension of the waist. The participant with Down syndrome was participated in strength training for 12 weeks, three times a week, three sets, 10-15 RM; resistance was adjusted according to the principle of progressive overload. To measure the effect of strength training, isokinetic strength variables and knee joint torques were measured before training and after 12 weeks of training. The participant with Down syndrome had some abnormalities in controlling knee motion during walking due to muscle hypotonia, ligament laxity, and weakness of muscles. Post-training isokinetic strength increased compared to pre-training measurements. Knee range of motion were increased after strength training. Strength training did not affect ad/adduction and in/exteranl moments but did have an effect on flexor/extensor moment and timing.

• Transactions of Materials Processing
• /
• v.12 no.3
• /
• pp.202-207
• /
• 2003

In order to examine the springback amount and material properties of aluminum alloy sheets (AL1050 and AL5052) in the warm forming which forms the sheet above the room temperature, the stretch bending and draw bending tests and tensile test in various high temperatures are carried out. The warm forming temperature 15$0^{\circ}C$ is a transition in terms of the material properties: over the forming temperature 15$0^{\circ}C$, them $\sigma$$_{YS}$ , $\sigma$$_{TS}$ , E, K, n, etc. are bigger but $\varepsilon$ and plastic strain ratio are smaller. Below the forming temperature 15$0^{\circ}C$, there are no big differences in material properties as the forming temperature changes. AL5052 sheet has more springback effect than AL1050 sheet. While the springbacks of AL5052 and AL1050 sheets show a big reduction over the warm forming temperature 15$0^{\circ}C$ in the stretch bending test, the springback rapidly reduces in the warm forming temperature 15$0^{\circ}C$-20$0^{\circ}C$ for AL5052 sheet and 20$0^{\circ}C$-25$0^{\circ}C$ for AL1050 sheet in the draw bending test.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.12
• /
• pp.120-126
• /
• 2002

The needs of ultra-precisely machined parts are increasing more and more. But the experimental data required to ultra precision machining of nonferrous metal is insufficient. The behavior of cutting in micro cutting area is different from that of traditional cutting because of the size effect. Copper is widely used as optical parts such as LASER reflector's mirror and multimedia instrument. In experimental, after oxygen-free copper is machined by ultra precision machine with natural mono crystal diamond tool (NCD) and synthetic poly crystal diamond tool (PCD), we compared chip formation and tool's wear according to used tool. Also, we researched optimized cutting condition with the results measured according to cutting condition such as spindle speed, feed rate and depth of cut. As a result, the optimal working condition that makes good surface roughness is obtained. The surface roughness is good when spindle speed is above 80 m/min, and feed rate is small and depth of cut is above 0.5 ${\mu}{\textrm}{m}$. In cutting of klystron anode and cavity 3.2 nmRa of surface roughness is obtained.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.5
• /
• pp.1-8
• /
• 2009

This paper is a continuation of the recent development on Hermite-based divergence free element method and deals with a non-isothermal fluid flow thru the buoyancy driven flow in a square enclosure with temperature difference across the two sides. The basis functions for the velocity field consist of the Hermite function and its curl while the basis functions for the temperature field consists of the Hermite function and its gradients. Hence, the number of degrees of freedom at a node becomes 6, which are the stream function, two velocities, the temperature and its x and y derivatives. This paper presents numerical results for Ra = 105, and compares with those from a stabilized finite element method developed by Illinca et al. (2000). The comparison has been done on 32 by 32 uniform elements and the degree of approximation of elements used for the stabilized finite element are linear (Deg. 1) and quadratic (Deg. 2). The numerical results from both methods show well agreements with those of De vahl Davi (1983).

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.3
• /
• pp.71-77
• /
• 2018

The purpose of this study was to investigate the effectiveness of elastic band resistance training for muscle strength among community-dwelling older adults. The systematic review and meta-analysis was conducted by following the Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA). Data were pooled using fixed effect models. Sit to stand, arm curl, and grip strength were analyzed for main effects. Heterogeneity between studies was assessed using the I2 statistics and publication bias was evaluated by funnel plots. Twelves studies were included representing 611 participants. Elastic band resistance training was effective for lower (d=3.89, 95% CI: 3.03, 4.75) and upper extremity muscle strength (d=4.08, 95% CI: 2.94, 5.23). Heterogeneity was moderate and no significant publication bias was detected. Based on these findings, there is clear evidence that elastic band resistance training has significant positive effects on muscle strength among community-dwelling older adults. Further study will be needed to perform subgroup analysis using number of sessions and exercise intensity as predictors.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.3
• /
• pp.152-159
• /
• 2002

SLA (Stereolithography Apparatus) it a process used to rapidly produce polymer components directly from a computer representation of the part. Though SLA is being recognized as an innovative technology, it still cannot be used to fully practical application since it lacks of dimensional accuracy compared to conventional process. If the shrinkage were perfectly uniform and no distortion took place, excellent part accuracy could still be achieved through and appropriate scaling factor when generating the build file. However, in certain geometries involving intersecting thick and thin sections, nonuniform retrain shrinkage becomes the engine of part distortion. In order to improve the part accuracy of SLA, this paper evaluates how largely each parameter of SLA contributes to the part accuracy and estimates the optimal set of parameter which minimizes the dimension error of the test part, "Slab (100mm$\times$100mm$\times$2mm)"and "scale bar"part. Three control parameters such as critical exposure, generation depth and fill cure depth are used.