• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.1089-1092
• /
• 2001

In the stereolithography process, build parameters are laser power, scan velocity, scan width, bean diameter, layer thickness and so on. These values are determined according to product accuracy and build time. Build time can be reduced by improving of scan velocity, laser power, layer thickness, hatching space and so on. But variation of these parameters influence part accuracy, surface roughness, strength. This paper observed cure properties in various beam diameter. In order to examine these, relationships of scan velocity and cure depth, scan velocity and cure width according to various beam diameter in one scan line are measured. And cure thickness is measured according to beam diameter and scan velocity in scan surface of one layer. For reduction of build time, beam diameter and scan velocity is proposed in stereolithography process.

• 한국정밀공학회지
• /
• 제20권2호
• /
• pp.76-84
• /
• 2003

Stereolithography is the technique using a laser beam to cure a liquid resin, a photopolymer, with three dimensional computer-aided design (CAD) data. The build parameters of stereolithography such as beam size, scan velocity. hatch spacing, layer thickness and etc. are determined by the accuracy of prototype, the build time and the cured properties of the resin. In particular, beam size is important processing parameter fur the other parameters. Therefore, this study observed the cured property to beam size. For this purpose, according to hatch spacing and beam size, the cure width and depth were measured on single cured line. Also, the cure width and depth were measured at single cured layer As a result of experiments. cure depth which varied from 0.23mm to 0.34mm was directly proportioned to beam radius. on the other hand, cure width which varied from 0.42mm to 1.07mm was inversely proportioned to beam radius. Surface roughness varied from 1.12 to 2.23 m for the ratio of hatch spacing to beam radius.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권4호
• /
• pp.50-55
• /
• 2007

Stereolithography (SLA) is a technique using a laser beam to cure a photopolymer liquid resin with three-dimensional computer-aided design (CAD) data, The accuracy of the prototype, the build time, and the cured properties of the resins are controlled by the SLA process parameters such as the size of the laser beam, scan velocity, hatch spacing, and layer thickness, In particular, the size of the laser beam is the most important parameter in SLA, This study investigated the curing properties of photopolymers as a function of the laser beam size, The cure width and depth were measured either on a single cure line or at a single cure layer for various hatch spacings and laser beam sizes, The cure depth ranged from 0.23 to 0.34 mm and was directly proportional to the beam radius, whereas the cure width ranged from 0.42 to 1.07 mm and was inversely proportional to the beam radius, The resulting surface roughness ranged from 1.12 to $2.23{\mu}m$ for a ratio of hatch spacing to beam radius in the range 0.5-2.0 at a beam radius of 0.17 mm and a scan velocity of 125 mm/sec.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.219-223
• /
• 2001

The on-line cure monitoring during the cure process of composite materials is important for better quality and productivity. The dielectric sensor for cure monitoring consists of base film and electrodes. Because the characteristic of dielectric sensor for the on-line cure monitoring is dependent on the base material, width and number of electrode, etc, the dielectric sensor should be standardized. And the selection of base film material of sensor is very important. In order to prevent the measuring errors generated from the increase of environmental temperature, the base film material should have stable dielectric constant with respect to environmental temperature. In this study, the newly developed dielectric sensor for cure monitoring was designed and the dissipation factor which is function of degree of cure was measured using the sensor. The relationship between the dissipation factor and degree of cure with respect to environmental temperature was investigated.

• 대한치과보철학회지
• /
• 제34권3호
• /
• pp.611-619
• /
• 1996

The purpose of this study was to evaluate the fitness of 4 kinds of resin record base materials. The record base materials used on the edentulous cast in this study were Triad VLC resin (Dentsply International Inc., U.S.A.), custom tray resin (Kerr Ltd., U.S.A.), heat-cure resin (Dentimex Co., Holland), and self-cure resin (Dentimex Co., Holland). The gap width between record base and cast were measured in the ridge crest and midpalatal area with microhardness tester. The results obtained were as follows : 1. Among the 4 kinds of record base, heat-cure Vertex fitted best on the cast. Triad and Fomatray fitted better than self-cure Vertex. Self-cure Vertex had the poorest fit. 2. The quality of the fit of the record base varied at different locations on the cast. The record base fit better in the ridge crest than midpalatal area. 3. In the midpalatal area, there's no significant difference in the fit of Fomatray, Triad and heat-cure Vertex. They all fit better than self-cure Vertex. 4. In the ridge crest, heat-cure Vertex fit better than any other record base.

• 폴리머
• /
• 제25권2호
• /
• pp.177-185
• /
• 2001

본 연구에서는 이관능성 에폭시인 diglycidylether of bisphenol A (DGEBA)/polysulfone (PSF) 블렌드를 시차 열분석기와 레오미터를 이용하여 경화 동력학과 유변학적 특성에 대해 연구하였다. DSC 측정 결과, 최대 발열 피크와 half-width 방법을 사용하여 구한 경화 활성화 에너지 (E$_{a}$ )는 PSF의 함량이 30wt%까지는 증가하였으나, 그 이상의 첨가에서는 감소하였다. 그리고, 전화량($\alpha$)과 전환 속도(d$\alpha$/dt)는 PSF의 함량이 증가함에 따라 감소함을 보였다. 본 연구에서의 유변학적 특성은 레오미터를 이용하여 등온 조건하에서 검토하였고, 겔화 시간과 경화 온도를 이용한 Arrhenius 방정식을 적용하여 가교 활성화 에너지 (E$_{c}$)를 검토한 결과, E$_{a}$ 와 유사한 경향을 나타내었다. 이는 높은 점도를 지닌 PSF의 첨가로 인한 DGEBA와 PSF의 상분리 현상 때문이라 사료된다.다.

• 한국작물학회지
• /
• 제5권1호
• /
• pp.65-68
• /
• 1969

잎담배의 다수성품종 육성의 선택에 앞서 각형질상호간의 상관관계를 구명하고 이들 형질이 수량에 어떻게 관여하는가를 분석함으로써 다수성 계통을 용이하게 선택할수 있겠으므로 이들 주요형질을 고찰한바 잎담배 수량에 직접상으로 관여하는 것은 황색종에서는 엽폭, 엽면적이었고 양건종에서는 간주, 엽수, 엽장, 엽면적이며 음건종에서는 간주, 엽수, 엽장, 엽폭, 엽면적이었다. 종류를 막론하고 엽폭과 엽면적이 수량에 크게 작용하며 이중 가장 측정이 용이하고 실제 다수성개체선택에 효과적인 형질은 엽폭이라 할 수 있다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.391-394
• /
• 2003

Laser direct writing process is developed 3rd harmonic Diode Pumped Solid State Laser with the near visible wavelength of 355 m sensitive polymer is irradiated by UV laser and developed using polymer solvent to obtain quasi-3D. It is important to reduce line width for image mode waveguides, so some investigations will be carried out in various conditions of process parameters such as laser power, writing speed, laser focus and optical properties of polymer. This process could be to fabricate a single mode waveguide without expensive mask projection method. Experimentally, the patterns of trapezoidal shape were manufactured into dimension of 8.4 mm width and 7.5 mm height. Propagation loss of straight waveguide measured 3 dB/cm at 1,550 nm.

• Archives of Reconstructive Microsurgery
• /
• 제13권1호
• /
• pp.58-62
• /
• 2004

Purpose: To cover the exposed tendons and bones after trauma and cure the concomitant osteomyelitis in the lower extremities, gracilis muscle free flaps are frequently preferred. 32 cases of gracilis muscle free flap we had done were analysed according to the indications, specification of flap length and width, pedicle length, vessels used in the anastomosis and final healing after at least over 1 year follow up. Materials and methods: From August 1995 through November 2002, we have performed 32 cases of gracilis muscle free flap transplantation with the general microsurgical procedures in the lower extremities. Open fracture of the middle and distal tibia were 12, exposed heel 6, crushing injury in the foot 5 cases, open fracture of the ankle 4, chronic osteomyelitis of the tibia 3 and osteomyelitis of the tarsal bones 2. Tailored flap length were ranged from 16 cm to 4 cm, width were from 5cm to 4cm. Pedicle length averaged around 4 cm. Anastomosis of one artery and two veins in both of donor and recipient were performed in 17 cases and one artery and one vein in 15 cases. Results: All flaps were survived, except 2 cases. Final flap healing was satisfactory to both of the patients and microsurgeon. Conclusion: Gracilis muscle free flaps are frequently chosen to cover the exposed components and cure the osteomyelitis in the lower extremities.

• 식물병연구
• /
• 제24권3호
• /
• pp.237-241
• /
• 2018

A circular bark with a 30 cm width was artificially removed from the trunk of a 250-year-old zelkova tree (Zelkova serrata) heavily damaged by artificial girdling in Sunchang, Jeonbuk Province in March of 2005. The debarked area was cleaned approximately 10 days after artificial girdling and bark margins with 2 cm width above and below the girdled portion were cut off to promote wound callus formation. Nine pieces of fresh bark (width 8 cm, length 35 cm, thickness 0.5 cm) were then prepared from branches of neighbor zelkova trees broken by heavy snowfalls and pasted onto the girdled portion of the tree, after which a Vaseline dressing was applied to water-proof the area and rubber bars were used to hold the implants to the trunk. Two pieces of the implanted fresh barks were successfully grafted onto the girdled area and the damaged tree has been vigorously growing over 13 years. To our knowledge, this is the first case of successful bark implantation to cure a 250-year-old zelkova tree heavily damaged by artificial girdling. This bark implantation technique will be utilized for the conversation and management of heavily damaged big and old trees in the future.