• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.5
• /
• pp.658-671
• /
• 1999

The major influencing factors on the strength of all-ceramic crowns are types of dental ceramics, fabrication techniques, methods of abutment preparation and cementation modes of all-ceramic restorations. Zinc phosphate cement and glass-ionomer cement were used as an early lot-ing media for all-ceramic crowns. Recently many studies have reported that resin cements have more advantages in increasing the fracture strength of restorations comparing with zincphosphate cement and glass-ionomer cement. The purpose of this study is to investigate the effect of etching, silane treatment, sandblasting and dentin bonding agents on fracture strengths of dental ceramics. 40 flat dentin specimens and 40 ceramic discs of 1.5mm thickness and 8mm diameter were fabricated, and divided into 4 groups according to surface treatments. Surface treatments before cementation were as follows Group I : (ceramic) : HF etching - silane treatment - application of bonding resin (dentin) : application of dentin bonding agent Group II : (ceramic) : sandblasting - application of bonding resin (dentin) : application of dentin bonding agent Group III : (ceramic) : application of bonding resin (dentin) : application of dentin bonding agent Group IV : (ceramic) : HF etching - silane treatment - application of bonding resin (dentin) : no dentin bonding procedure Dentin specimens and ceramic discs were cemented with dual cure resin cement, and went through thermocycling. Compressive stress es were loaded on the centers of ceramic discs with Instron test-ing machine, and fracture strengths resistance for catastrophic fracture were measured The results were as follows. 1. The group I showed the highest fracture resistance. The next was group II And group III, IV followed. 2. There was a significant difference in the mean value of fracture strengths between group I and group III (p<0.05), but no significant differences between group I and group II, and group II and group III (p>0.05). 3. There was a significant difference in the mean value of fracture strengths between group I and group IV (p<0.05).

• Restorative Dentistry and Endodontics
• /
• v.16 no.1
• /
• pp.60-73
• /
• 1991

The purpose of this study is to evaluate the effects of etching time, environmental temperature and humidity on the adhesion of composite resin to glass-ionomer cement. Two chemical cure composite resins (Clearfil F II and Microrest AP) and two glass-ionomer cements (Fuji ionomer Type I and KET AC-CEM) were used as the experimental materials. The experiment is performed in 3 stages: The first stage is to bond composite resins to glass-ionomer cements, and the surface was not etched, and etched for 20 seconds, 40 seconds, and 60 seconds. Then specimens are stored in distilled water at $37^{\circ}C$ for 24 hours to measure tensile strength. The second stage is to choose the one group that had the highest tensile strength from the first stage and prepare two experimental groups: One group with composite resin bonded to glass-ionomer cement without etching and bonding agent application and the other with composite resin bonded to glass-ionomer cement with etching but without any bonding agent application. The specimens are stored in distilled water at $37^{\circ}C$ for 24 hours and tensile strength is measured. The third stage is to choose group that had the highest tensile strength from the first stage experiment, and bond composite resin to glass-ionomer cement at $24^{\circ}C$ 44%, $30^{\circ}C$ 44%, $30^{\circ}C$ 80%, and $32^{\circ}C$ 92%. The storage time of specimens is to bond immediately after storage, then changed to 30 sec., 60 sec., and 120 sec.. Specimens are stored in distilled water at $37^{\circ}C$ for 24 hours and their tensile strength are measured again. The following results were obtained: 1. As the etching time increases, the tensile bond strength between glass-ionomer cement and composite resin increase, and the tensile bond strength is the highest when acid etched for 60 minutes (P < 0.05). 2. After acid etching for 60 minutes, the tensile strength of the group with bonding agent was stronger than that without bonding agent application (P < 0.05). 3. The tensile strength of Clearfil F II was stronger than that of Microrest AP. 4. It was observed that the tensile bond strength is not affected by different storage time with different temperature and humidity. 5. As the humidity was increased, the tensile bond strength between glass-ionomer cement and composite resin decreased (P < 0.05).

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.11a
• /
• pp.125-126
• /
• 1994

The chemorheological changes and kinetics during curing reaction of an silica filled epoxy system (DGEBA with curing agent Polyxoypropylenediamine) were investigated. This study concentrates on the influence of silica on the reaction kinetics and rheological behavior of the eopxy system. The concentration of the filler was varied 0~200phr. Curing behavior of the silica filled epoxy system was measured at various heating rates with DSC. Conversion was also measured by integrating the obtained DSC curve and Kinetic parameters measured by using the nonlinear regression method. DSC experiments showed that the presence of silica was found to accelerate the progress of the curing reaction and of reduce the heat of reaction compared with that of unfilled epoxy systems . Rheological experiments were conducted on a Physica by using a disposable parallel plate fixture. Material properites were measured such as the elastic modulus(G′), the loss modulus(G"), the loss tangent(tan $\delta$), and the viscosity was at the initial stahe, and the more the silica filler was added, and the lower the gel temperature was in the epoxy system. In this study it is concluded that the curing of the silica filled epoxy system was found to be accelerated, as silica was added to the epoxy compound.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.4
• /
• pp.733-736
• /
• 1992

Different parameters of subclinical mastitis were compared in 327 cattle and 493 buffaloes and the effect of immunopotentiating agents on subclinical mastitis in these animals was studied. Subclinical mastitis was detected in 8.2 percent buffalo and 24.0 percent cow quarter by modified whiteside test (MWT). In both the species there was decrease in lactose contents with increase in the degree of MWT reactivity i.e. $4.8{\pm}1.14$ to $2.31{\pm}0.82$ in cattle and $5.01{\pm}1.47$ to $2.36{\pm}1.02$ in buffaloes. While the chloride contents of the milk increased with increase in the MWT reactivity i.e. $0.19{\pm}0.4$ to $0.30{\pm}0.06$ in cattle and $0.20{\pm}0.04$ to $0.31{\pm}0.13$ in buffaloes. Micro-organisms belonging to Staphylococcus, Micrococcus, Bacillus, Streptococcus, Enterobacteria, Corynebacterium groups and yeasts were isolated from subclinical mastitis cases. Vitamin E and Levamisole cured 64.5 and 60.0 percent cases of subclinical mastitis in buffaloes but only 32.0 and 24.0 percent cases in cattle. Cure was not affected by the degree of MWT and the type of organisms involved.

• Journal of Yeungnam Medical Science
• /
• v.37 no.4
• /
• pp.286-295
• /
• 2020

Respiratory infections are very common and highly contagious. Respiratory infectious diseases affect not only the person infected but also the family members and the society. As medical sciences advance, several diseases have been conquered; however, the impact of novel infectious diseases on the society is enormous. As the clinical presentation of respiratory infections is similar regardless of the pathogen, the causative agent is not distinguishable by symptoms alone. Moreover, it is difficult to develop a cure because of the various viral mutations. Various respiratory infectious diseases ranging from influenza, which threaten the health of mankind globally, to the coronavirus disease 2019, which resulted in a pandemic, exist. Contrary to human expectations that development in health care and improvement in hygiene will conquer infectious diseases, humankind's health and social systems are threatened by novel infectious diseases. Owing to the development of transport and trading activity, the rate of spread of new infectious diseases is increasing. As respiratory infections can threaten the members of the global community at any time, investigations on preventing the transmission of these diseases as well as development of effective antivirals and vaccines are of utmost importance and require a worldwide effort.

• The Korean Journal of Pharmacology
• /
• v.10 no.2
• /
• pp.25-29
• /
• 1974

The present clinical trial was performed to evaluate the anthelminthic effect and tolerance of Oxantel pamoate, a new antiwhipworm agent, in the treatment of T. trichiurus infection. Oxantel pamoate oral suspension was administered as a sing1e dose of 10 mg per kg. body weight to a total of 46 T. trichiurus infected cases selected out of 64 positives, by examining 89 fecal specimens collected from the soldiers and in-patients of xx Armed Forces General Hospital. For the evaluation, the negative conversion rate (cure rate) and the egg reduction rate were assessed 22 days after the treatment. The result obtained were as follows: 1. The prevalence rate of T. trichiurus infection in this study was 71.9%, while the mean E.P.G. of 46 treated cases was 126. 2. The egg negative conversion rate was 91.3%, and 98.4% of egg reduction rate was obtained. 3. From the observation of 107 worms expelled during 3 consecutive days after the treatment, it was known that sex ratio of male and female was about 1 : 2 and that average worm burden per capita was 2.3. 4. In all treated cases, the medication was readily accepted and well tolerated. On the hemograms, urinalysis and liver function tests, no significant differences were noted before and after the drug administration. There was also no detectable objective and subjective side effect.

• Herbal Formula Science
• /
• v.6 no.1
• /
• pp.215-226
• /
• 1998

Geagibokrounghwan (桂技茯笭湯) has long been used to cure human diseases such as vascular and blood disorders. However, it is still unkown on its action mechanism, physiolosical and biochemical meaning. Thus, many attempts were tried to show the scientific background covering the above mentioned mechanism. The effect of Geagibokrounghwan, which was known to date, as follow; effective circulation of body blood system, proliferation of leucocytes and antioxidative action. In this study, we have applied the Geagibokrounghwan administration and feed to mouse, to see effects on the expression of superoxide dismutase(SOD) mRNA as antioxidative agent and oxygen radical scavenger. Total RNAs includingmRNA have been isolated from liver and white blood cells after mice were fed with cholesterol in high dose. Also, in a separate group, the cholesterol-administrated mice were fed with Geagibokrounghwan to see the effects on SOD transcription. and then reverse transcriptase-polymerase chain reaction (RT-PCR) usion each primer set (SOD-F;GATGAAAGCGGTGT-3'; SOD-R; 5'-CCTGTGGAGTGATT-3') were performed to trace theamounts of mRNA. SOD mRNA was specifically expressed in Geagibokrounghwan-fed mice at 2 weeks after treatment, however, gradually reduced after 4 weeks. These results indicate that Geagibokrounghwan is highly applicable in treatment of the above mentioned human diseases.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.221-226
• /
• 2008

Novel synthetic routes were proposed for hydroxy-terminated Poly(EO-co-THF) by Cationic ring-opening copolymerization of Tetrahydrofuran(THF) and Ethylene oxide(EO). It was carried out using Boron trfluoride tetrahydrofuranate($BF_3$ THF complex) as catalyst in the presence of 1,4-butandiol. The resultant products are well-defined linear polyetherpolyol. Polyurethane(TPU) were prepared using resultant polyetherpolyol with IPDI/N-100 as curing agent and TPB(Triphenylbismuth) /MA(Maleic anhydride) mixture as cure catalyst. Mechanical properties of TPU prepared from poly(EO-co-THF) polyol were investigated and compared with polyurethane using ATK HTPE.

• Korean Journal of Agricultural Science
• /
• v.14 no.2
• /
• pp.396-400
• /
• 1987

The authors made an attempt to trephinize in a cow with frontal sinusitis caused by bacterial infection after dehorning. Combination therapy with irrigating solution, antibiotics and proteolytic agent was effective in the patient. As it takes for a long duration to cure the patient, it is considered that complete prophylaxis such as preservation and protection for dehorned area is desirable.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.9_10 s.146
• /
• pp.1274-1284
• /
• 2005

Effect of fixation methods and relaxation treatment on the dimensional stability and physical properties of MDPPA/HMM treated cotton knitted fabrics were studied. Combination of four different fixation methods - relaxation, swelling agent treatment, pad dry cure fixation, and wet fixation - were applied to flame retardant finish of 4 kinds of cotton knitted fabric with MDPPA/HMM. Then these fabrics were washed 10 times. As a result, In swelling treatment on 10G showed relatively higher value of length shrinkage than 14G. Length and width shrinkage were increased by initial washing treatment and no further change was shown after 6 washing cycles. After 10 washing cycles, length and width shrinkage decreased. The KES standardized basic value of B/W, 2HB/W and bursting strength of interlock were relatively larger than those of single jersey. The values of B/W and 2HB/W of cotton knitted fabrics were increased by relaxation and washing treatment but were decreased by swelling treatment. In addition, the bursting strength of the cotton knitted fabrics was decreased after fusing, washing and relaxation treatment.