• Journal of Korean Medical classics
• /
• v.20 no.3
• /
• pp.33-48
• /
• 2007

Before the advent of febrile disease theory, people had used Sanghallon's theory to cure febril disease. Therefore, Wu-Tang both suggested new prescription and used the former prescription of Sanghallon(傷寒論) in curing febrile disease. However, he didn't use the original prescription of Sanghallon and modified the quantity and ingredients properly. Through this process, the fault of Sanghallon was supplemented and the method of curing febrile disease was advanced. To research about this, it will be much easier to understand prescription of Sanghallon and even the treatments and views of Wu-Tang about febrile disease. In this study, I researched the way Wu-Tang applied prescription of Sanghallon, focusing on Decoction for Purgation, White Tiger Decoction, Decoction for Restoring Pulse which was used by Wu-Tang in various ways and applied in treatment of febrile disease.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.4
• /
• pp.285-290
• /
• 2005

Mechanical properties of rubber mat are influenced by many factors such as compounding ingredients and states of cure, process of rubber, and fillers. Our study aim is to investigate influence of N-isopropyl-N'-chloro-P-phenylene diamine antioxidant on the thermal aging and ozone cracking. In this work, the degradation of antiblastic rubber mat was studied and suggested mechanism to involve two-types of degradation, thermal-aging and ozone-cracking both of which can be contained antioxidant or non-antioxidant.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.48 no.2
• /
• pp.300-311
• /
• 2024

Amid global environmental concerns, initiatives to adopt sustainable industrial processes have garnered significant attention in diverse sectors. Efforts have centered on utilizing natural resources as dyeing and functionalizing agents in the textile industry. However, the limited color fastness and functional endurance of natural compounds remains a substantial challenge. This research investigated whether ultrasound could enhance the finishing effect of natural compounds on cotton fabrics. Chestnut shell extract was prepared and applied to cotton fabrics using a pad-dry-cure technique, with concurrent application of ultrasonic power. Once integrated into the fabrics, the chestnut shell extract exhibited prolonged health benefits for users. The findings demonstrated that ultrasound treatment during the finishing process facilitated the diffusion of natural compounds from the chestnut shell extract into the fabric structure, resulting in a substantial enhancement of the finishing effect, notably augmenting the antibacterial properties of the treated cotton fabrics.

• Biomolecules & Therapeutics
• /
• v.32 no.3
• /
• pp.291-300
• /
• 2024

Autosomal dominant polycystic kidney disease (ADPKD), a congenital genetic disorder, is a notable contributor to the prevalence of chronic kidney disease worldwide. Despite the absence of a complete cure, ongoing research aims for early diagnosis and treatment. Although agents such as tolvaptan and mTOR inhibitors have been utilized, their effectiveness in managing the disease during its initial phase has certain limitations. This review aimed to explore new targets for the early diagnosis and treatment of ADPKD, considering ongoing developments. We particularly focus on cell polarity, which is a key factor that influences the process and pace of cyst formation. In addition, we aimed to identify agents or treatments that can prevent or impede the progression of renal fibrosis, ultimately slowing its trajectory toward end-stage renal disease. Recent advances in slowing ADPKD progression have been examined, and potential therapeutic approaches targeting multiple pathways have been introduced. This comprehensive review discusses innovative strategies to address the challenges of ADPKD and provides valuable insights into potential avenues for its prevention and treatment.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.4
• /
• pp.656-662
• /
• 2001

Angiogenesis is known as a crucial process in the growth and spreading of tumor cells. Accordingly, the effective inhibition of this process would appear to be a promising way to cure angiogenesis-related diseases, including cancer. This study demonstrates that acalycixenolide E (AX-E) from the marine organism Acalycigorgia inermis exhibits a potent anti-angiogenic activity both in vitro and in vivo. AX-E inhibits the bFGF-induced proliferation of HUVECs in a dose dependent manner, along with the bFGF-induced migration, invasion, and tube formation of HUVECs. Moreover, AX-E potently inhibits the in vivo neovascularization of the chorioallantoic membranes (CAMs) of growing chick embryos. interestingly, AX-E suppresses the expression of metalloproteases 2 and 9, yet shows no effect on their activities. The novel chemical structure and potent anti-angiogenic activity of AX-E will be of great value in elucidating the molecular mechanism of angiogenesis as well as in the development of a novel anti-angiogenic drug.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.5
• /
• pp.620-632
• /
• 2017

A chemical vapor curing method(CVC) was developed to cure polycarbosilane(PCS) fibers by using cyclohexene vapour as a non-oxygen active reactant, instead of air in oder to prepare the silicon carbide(SiC) fiber with low oxygen content. A cross-linked PCS fibers by cyclohexene vapor showed a completely different variation in IR spectra in comparison to the air-cured PCS fiber. CVC method resulted in less than 3 wt% in oxygen content. In this experiment conditions, The average tensile strength and modulus of SiC fiber obtained by CVC had 1995 MPa and 183 GPa respectively, which is higher than that of SiC fiber prepared by air-curing process.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.1
• /
• pp.13-18
• /
• 2012

In this study, silicone injection molding technology with curved thermoplastic insert was developed to produce super-hydrophobic surface. Thermoplastic insert part and injection mold design of base plastic cover were performed to produce cost effective hydrophobic surface part. An optimization process of part thickness for thermoplastic insert part was performed with transient thermal analysis under silicone over-molding process condition. Structural thermal analysis of silicone injection mold was also performed to obtain uniform temperature condition on the surface of micro-patterned mold core. Super-hydrophobic surface for the silicone injection molded part with thermoplastic insert could be verified from the measurement of contact angle. It was shown that the averaged contact angle was over $140^{\circ}$.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.3
• /
• pp.152-159
• /
• 2002

SLA (Stereolithography Apparatus) it a process used to rapidly produce polymer components directly from a computer representation of the part. Though SLA is being recognized as an innovative technology, it still cannot be used to fully practical application since it lacks of dimensional accuracy compared to conventional process. If the shrinkage were perfectly uniform and no distortion took place, excellent part accuracy could still be achieved through and appropriate scaling factor when generating the build file. However, in certain geometries involving intersecting thick and thin sections, nonuniform retrain shrinkage becomes the engine of part distortion. In order to improve the part accuracy of SLA, this paper evaluates how largely each parameter of SLA contributes to the part accuracy and estimates the optimal set of parameter which minimizes the dimension error of the test part, "Slab (100mm$\times$100mm$\times$2mm)"and "scale bar"part. Three control parameters such as critical exposure, generation depth and fill cure depth are used.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.3
• /
• pp.57-62
• /
• 2020

Concrete pump cars are a type of construction equipment that continuously supplies concrete using hydraulic pressure. When manually casting concrete, there may be a problem in the final quality of the concrete due to differences in the degree of cure between the pre-poured and subsequent concretes. Concrete pump cars are the most efficient machines to supply concrete in the shortest time; however, it is difficult to calculate their margin of safety during operation. In this paper, we verified the structural safety of the concrete pump car using a static/dynamic analysis at various position angles. Next, these results were compared with experimental results; strains using strain gages were compared with the strains measured using FEM software to verify the static analysis. In addition, the maximum displacement during the pumping was measured and it was used for fatigue analysis to evaluate the dynamic structural safety.

• Fashion & Textile Research Journal
• /
• v.6 no.5
• /
• pp.667-672
• /
• 2004

Poly(ethylene terephthalate) (PET) fabrics were treated with a silica particle and phosphate flame retardant to determine the optimum process condition of the digital textile printing(DTP) media. The treating conditions for the study were 6 conditions, from F1 to F6, in which F3, F4 and F5 were treated with mixture of both silica particle and phosphate compound in process of pad, dry and cure fixation. F6 was treated with phosphate compound only and silica particle coating successively. Xanthan gum was used to control the migration of liquid phosphate compound onto PET fabrics. The change in surface morphology of fabrics treated with silica particle and phosphate compound was observed by SEM and flame retardance was evaluated by limiting oxygen index(LOI). It was observed that F6 was the excellent flame retardance and low bleeding in printing, Collectively, the printing characteristics of silica to cyan, magenta, yellow and black ink and flame retardance of fabrics finished with phosphate compound were identified in this study.