• Restorative Dentistry and Endodontics
• /
• v.18 no.2
• /
• pp.423-430
• /
• 1993

The purpose of this study was to investigate the effect of ferric and ferric ions contained in phosphoric acid solution as a pretreatment solution on bonding of MMA/TBBO resin to dentin. Each of 1 % and 3 % ferric chloride. cupric chloride. cupric sulfate. and cupric nitrate was mixed into 10% phosphoric acid solution and pretreated dentin surface of bovine anterior teeth for 30 seconds followed- by water rinse and dry. Tensile bond strength was determined after bonding of pretreated dentin with MMA/TBBO resin by use of brush-on ;technique and storing for 24 hours in 3it distilled water. The amount of cupric ions adsorbed on pretreated dentin surface was detected by Wave-Dispersion X-ray microanalyzer for different groups of each pretreatment solution containing cupric salts. The pretreatment with cupric ions contained in 10% phosphoric acid solution was effective to increase bonding strength of MMA/TBBO resin to dentin but not in case of ferric ions. The pretreatment with 3 % cupric chloride and cupric nitrate both enhanced significant increase in bonding strength compared to the control group of 10% phosphoric acid solution(p<0.05). Cupric ions measured in pretreated dentin surface was higher in 3 % cupric chloride group than in 1% cupric chloride group, but couldn't find distinct relationship from the results of this experiment between the amount of adsorbed cupric ions according to the kind of cupric salts and the bonding strength value.

• Journal of Powder Materials
• /
• v.13 no.1 s.54
• /
• pp.57-61
• /
• 2006

The present work illustrates the use of water-soluble cupric salts as ingredients of binder for injection molding of $W-10 wt\%$ Cu. Parts produced are dense, homogeneous and have good surface finish, compared to those produced using conventional binder system. This new binder system provides also process-simplification benefit. $CuCl_2\;and\;Cu(NO_3)_2$ with the purity of $98\%$ was selected for this study. Rapid sintering process involving thermal decomposing was successful in densification for 1h. Final density that is about $93\%$ of theoretical value could be obtained, and are distinguishable from conventionally processed W-Cu composites.

• Journal of the Korean Chemical Society
• /
• v.54 no.6
• /
• pp.737-743
• /
• 2010

Coupling of 5-amino-1,3-diaryl-pyrazoles 1a-c with diazonium salts of different aryl amines gave a series of novel 1,3-diaryl-5-amino-4-arylazopyrazoles 3a-l. Such compounds could be also obtained by reaction of 5-amino-1,3-diaryl-4-nitroso- 1H-pyrazoles 2a-c with different aryl amines in alkaline medium. Oxidation of azo derivatives 3a-l with cupric acetate, in dimethyl formamide and stream of air, gave 2,4,6-triaryl-2,4-dihydropyrazolo [4,3-d]-1,2,3-triazoles 4a-l. and the fluorescence properties of the cyclic triazoles were studied. Diazotization of 5-amino-1,3-diaryl-1H-pyrazoles 1a-c by sodium nitrite in ortho-phosphoric acid followed by coupling with some aryl amines gave o-aminoazo compounds 5a-f. Cyclisation of compounds 5a-f in pyridine and cupric acetate gave the corresponding triazoles 6a-f. The coupling of compounds 6a-f with different aryl diazonium salts gave compounds 7a-j. The synthesized dyes were applied to polyesters as disperse dyes and the fastness properties were evaluated.

• Textile Coloration and Finishing
• /
• v.24 no.4
• /
• pp.247-252
• /
• 2012

The objective of this study was to find an appropriate method and process for protecting the green color in bamboo leaves and subsequent extraction of the green colorants, chlorophyll. Various inorganic salts including cupric sulfate, ferric sulfate, and zinc chloride were employed as green color protectors. Accordingly, the effects of metal salts and treatment conditions on color protection were investigated to find appropriate protector and conditions. And also, the efficacy of bamboo colorants as a natural green dye was evaluated through dyeing and colorfastness tests. Antimicrobial activity of dyed fabrics was measured by shake flask method in terms of bacterial reduction rate using Staphylococcus aureus(ATCC 6538). On the basis of experimental results for stabilizing bamboo leaves colorants, it was confirmed that Cu was the most appropriate metal type considering dye uptake, photostability and light fastness, and its optimum concentration was 0.025%. After the stabilization, the colorants were extracted efficiently at NaOH aqueous solution of 1.00%. It was concluded that bamboo leave has a high potentiality as new resources to produce a natural green dye with antimicrobial functionality.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.19 no.3
• /
• pp.224-228
• /
• 1990

Cabbage contained high peroxidase activity among tested plant sources. The cabbage peroxi-dase can replace horseradish peroxidase to assay glucose with glucose oxidase. The amount of glucose can be determined quantitatively by glucose oxidase-cabbage peroxidase. The opti-mum pH and temperature for enzymatic glucose determination by glucose oxidase-cabbage peroxidase were 6.0 and 35-45$^{\circ}C$ respectively. The glucose assay was inhibited by addition of various metal salts such as mercuric chloride lead acetate silver nitrate ammonium molyb-date sodium tunstate and cupric sulfate. The relationship between absorbance and amount of glucose was linear up to 8.33 mM glucose in the assay mixture under the assay conditions.

• Nuclear Engineering and Technology
• /
• v.8 no.2
• /
• pp.89-99
• /
• 1976

The grafting of acrylic acid in aqueous solution to polyvinyl chloride fibers tab been studied in the presence of ferrous, ferric, and cupric salts, The mutual irradiation technique was adopted using a Co-60 source or a Van do Graaff accelerator. The grafting and homopolymerization were suppressed by the cations. Particularly the grafting was suppressed by the cations in the following order of effectiveness : $Cu^{2+}$>$Fe^{2+}$>$Cu^{3+}$. The rate of grafting (in %/hr) was proportional to the 0.76th power of the dose rate over the range from 8.5f $10^3$ rad/hr to $1.4\times10^5$ rad/dr. The apparent activation energy for the grafting was determined to be 6.1 Kcal/mole between $25^{\circ}$ and $75^{\circ}C$ for the mixture of AA-HaO-$(CH_2Cl)_2$, containing Mohr's salt, $4\times10^{-3}$ mole/l. The increase of the grafting was observed when total dose and dose intensity were raised, or when ethylene dichloride as a swelling agent was saturated in the monomer mixture. The grafted polyvinyl chloride fibers showed considerable improvement in moisture regain, heat shrinkage, and melting properties, but tensile properties were not significantly affected by grafting.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.11 no.3
• /
• pp.67-74
• /
• 1982

The effect of various pH levels, temperatures. organic acids, inorganic salts, metal ions on the stability of the anthocyanins pigment (pH 3.7) from the juice of raspberries were investigated. Initial absorption of total anthocyanin was decreased as pH increased from 1.0 to 7.0. Total amount of anthocyanin reached the highest at pH 3.7 and least at pH 7.0. The total anthocyanin content decreased rapidly with the increasing temperature. Many organic acids were found to enrich and stabilize the color density at 520nm in anthocyanin solution (pH 3.7). The hyperchromic effect of saturated n-carboxylic acid increased in the following order; formic acid> acetic acid>n-butyric acid>propionic acid. On the polycarboxylic acid, especially, malic acid showed 550$\sim$930% higher than control group. On the inorganic salts (0.5M), sodium perchlorate had the most hyperchromic effect and followed by sodium sulfate>sodium chloride>sodium phosphate, monobasic. Among the metal ions, both aluminium ion and cupric ion much more accelerated the anthocyanins degradation as compared with other metal ions.

• Microbiology and Biotechnology Letters
• /
• v.4 no.3
• /
• pp.91-97
• /
• 1976

During the course of studies on the production and utilization of thermostable ${\alpha}$-amylase from a thormophilic actinomycete species isolated from soil, partial characterization of the ${\alpha}$-amylase has been (arried out. The optimum pH for the dextrinogenic activity of the enzyme was found to be 6.5 and the maximum reaction rate was achieved at a temperature range of 55$^{\circ}$ to 65$^{\circ}C$. Calcium ion was recognized to have a slight effect in activating the enzyme, while heavy metal salts especially ferrous and cupric ions showed a remarkable inhibition effect. The enzyme was best protected iron thermal denaturation at pH 8.0 with tris-HCI buffer；inactivation was rapid at higher or lower pH values. Furthermore, its thermal stability was greatly increased by calcium ion, particulary at the final concentration of 1${\times}$10$\^$－2/ mole in the reaction mixture. The Km value for the ${\alpha}$-amylase was calculated to be 2.17${\times}$10$\^$－4/g per $m\ell$ and the energy of activation for the dextrinogenic reaction to be 12,000${\pm}$580 ㎈ per mole.

• Microbiology and Biotechnology Letters
• /
• v.7 no.2
• /
• pp.75-89
• /
• 1979

One strain of Penicillium sp. (175-66-B), isolated from soil, was able to produce a substance that has a strong inibition activity against the Agkistrodon and Trimeresurus venoms. In this experiment, the chemical and biological properties of the sample were investigated. As an inhibitory substance, it was effective to the proteinase, hemorrhagic and lethal factors of Agkistrodon and Trimeresurus venoms, and also effective to several fractions of the proteinases and hemorrhagic factors of Agkistrodon halys blomhoffi venom. Moreover, in the addition of prednisotone, it was more effective for the cure of the mouse envenomated with the venom amount of two fold of MLD$_{100}$. This substance was very stable to the acid, alkali and heat. Its melting point was high enough to sublime at 222$^{\circ}C$ without any decomposition. This sample was easily dissolved only in hot water, but not in several organic solvents except for a little dissolution in elate. It did not have the chelating activity. It had very strong specificity to the snake venoms. but its activity was depressed by the addition of zinc or cupric salts. This sample had no acute toxicity to the mouse. Its chemical formula was $C_{16}$ $H_{12}$$N_2$ $O_{10}$ with the molecular weight of about 392. It has two epoxy groups and four carboxyl radicals, but amino, nitrite and nitrate radicals, unsaturated bonds and aromatic ring were not detected. Theuchemical configuration of this sample was suggested to be;