• Journal of the Korean Geotechnical Society
• /
• v.19 no.2
• /
• pp.199-206
• /
• 2003

Particle-size distribution in soils is one of the most fundamental physical properties of soils. One of the latest developments in the study of particle-size distributions has focused on the use of fractal theories. In this study, the fragmentation fractals were used for determining the characteristics of the particle-size distribution curve. It was shown that the mass-size distribution method was more practical than the cumulative number-size distribution method. From the co-relation between fractal dimensions($D_{tot}$) and the coefficient of uniformity($C_{u}$), there was a sharp increase in fractal dimensions for $C_{u}$<4, but fractal dimension converged the single value for $D_{u}$$\geq$6. Fractal dimensions were affected by small sized particles for $C_{c}$$\geq$3 and large sized particles for $C_{c}$/<3. As a result of the analysis of the influence of the effective size($D_{10}$), it was observed that the changes of $D_{tot}$/ were nominal beyond the effective size.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.3
• /
• pp.662-669
• /
• 1994

In the combustion system, the optimum spray conditions reduce the pollutant emission of exhaust gas and enhance the fuel efficiency. The spray characteristics-the drop size, the drop velocity, the number density and the mass flux, become increasingly important in the design of combustor and in testifying numerical simulation of spray flow in the combustor. The purposes of this study are to clarify the spray characteristics of twin-fluid nozzle and to offer the data for combustor design and the numerical simulation of a spray flow. Spatial drop diameter was measured by immersion sampling method. The mean diameter, size distribution and uniformity of drop were analyzed with variations of air/liquid mass flow ratio. The results show that the SMD increases with the liquid supply flow rate and decreases with the air supply velocity. The radial distribution of SMD shows the larger drops can diffuse farther to the boundary of spray. And the drop size range is found to be wider close to the spray boundary where the maximum SMD locates.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.4
• /
• pp.408-415
• /
• 1997

Data from 5,311 ewes and 13,076 lambing from 1977 through 1994 were used to analyse both annual and cumulative outputs in terms on total number of lambs born, total lamb weight weaned and total wool produced per ewe for ewe longevity 1 to 8 depending on their productive life in the flock. Ewes at Khushab produced 0.08 more lambs per parturition than ewes at Khizerabad; however, 0.39 less lambs were weaned at Khushab than at Khizerabad. Similarly, cumulative number of lambs born was more at Khushab flock than Khizerabad flock (p < .01). However, total weight of lambs weaned was greater at Khizerabad than Khushab flock (p < .01) for each ewe longevity. Most ewes (35%) were sold/replaced just after their first parturition (i. e. ewe longevity 1). The overall mean for annual sale/replacement was 32 and 23% at Khushab and Khizerabad, respectively. Distribution of growth and reproductive traits from 1977-94 did not show upward or downward trend inspite of heavy sale/replacement except yearly variation. Lack of any genetic progress over the year suggested that random breeding was employed without any scientific selection programme. Annual means for lambs born, lambs weaned and weight of lambs weaned per ewe present in the flock were the highest for ewe longevity 2 compared with other ewe longevity groups. Relative efficiency in terms of net income was highest for ewe longevity 5 followed by ewe longevity 4 and 6 in both flocks.

• Journal of Applied Reliability
• /
• v.14 no.4
• /
• pp.225-229
• /
• 2014

A one-shot device is defined as a product, system, weapon, or equipment that can be used only once. After use, the device is destroyed or must undergo extensive rebuild. Determining the reliability of a one-shot device poses a unique challenge to the manufacturers and users due to the destructive nature and costs of the testing. This paper presents a reliability growth prediction for a one-shot system. It is assumed that 1) test duration is discrete(i.e. trials or rounds); 2) trials are statistically independent; 3) the number of failures for a given system configuration is distributed according to a binomial distribution; and 4) the cumulative expected number of failures through any sequence of configurations is given by AMSAA model. When the system development is represented by three configurations and the number of trials and failures during configurations are given, the AMSAA model parameters and reliability at configuration 3 are estimated by using a reliability growth analysis software. Further, if the reliability growth predictions do not meet the target reliability, the sample size of an additional test is determined for achieving the target reliability.

• Korean Journal of Agricultural Science
• /
• v.47 no.3
• /
• pp.615-624
• /
• 2020

An effective sampling method is necessary to monitor potato tuber moths (Phthorimaea operculella) because they are the biggest concern in potato-cultivating areas. In this study, a sequential sampling method was developed based on the results of field surveys of potato tuber moths in South Korea. Potato tuber moths were collected in fields cultivating potatoes at six sites, and their spatial distribution was investigated using the Taylor power law. The optimal sampling size and cumulative number of potato tuber moths in traps to stop sampling were determined based on the spatial distribution pattern and mean density of the collected potato tuber moths. Finally, the developed sampling method was applied to propose a control action, and its sampling efficiency was compared with that of the traditional sampling method using a binomial distribution. The potato tuber moths tended to aggregate; the optimal number was approximately 5 - 16 traps for sampling, and the number varied with the mean density of potato tuber moths according to the sampling sites. In addition, one, two, and three sites might require the following actions: Continued sampling, control, and no control, respectively. Sampling with the binomial distribution showed the minimum sample size was 12 when considering the economic threshold level. Here, we propose an effective sampling method that can be applied for future monitoring and field surveys of potato tuber moths in South Korea.

• Journal of The Korean Astronomical Society
• /
• v.55 no.3
• /
• pp.75-86
• /
• 2022

The lunar surface progressively darkens and reddens as a result of sputtering from solar wind particles and bombardment of micrometeoroids. The extent of exposure to these space weathering agents is frequently calculated as the location in a diagram of reflectance at 750 nm vs. 950 nm/750 nm color (R-C). Sim & Kim (2018) examined the R-C trends of pixels within ~3,500 craters, and revealed that the length (L) and skewness (s) of R-C trends can be employed as a secondary age or maturity indicator. We broaden this research to general lunar surface areas (3,400 tiles of 0.25° × 0.25° size) in 218 mare basalt units, whose ages have been derived from the size-frequency distribution analysis by Hiesinger et al. (2011). We discover that L and s rise with age until ~3.2 Gyr and reduce rather rapidly afterward, while the optical maturity, OMAT, reduces monotonically with time. We show that in some situations, when not only OMAT but also L and s are incorporated in the estimation utilizing 750 & 950 nm photometry, the age estimation becomes considerably more reliable. We also observed that OMAT and the lunar cratering chronology function (cumulative number of craters larger than a certain diameter as a function of time) have a relatively linear relationship.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.48.2-48.2
• /
• 2021

The lunar surface progressively darkens and reddens as a result of sputtering from solar wind particles and bombardment of micrometeoroids. The extent of exposure to these space weathering agents is frequently calculated as the location in a diagram of reflectance at 750 nm vs. 950 nm/750 nm color (R-C). Sim & Kim (2018) examined the R-C trends of pixels within ~3,500 craters, and revealed that the length (L) and skewness (s) of R-C trends can be employed as a secondary age or maturity indicator. We broaden this research to general lunar surface areas (3,400 tiles of 0.25° × 0.25° size) in 218 mare basalt units, whose ages have been derived from the size-frequency distribution analysis by Hiesinger et al. (2011). We discover that L and s rise with age until ~3.2 Gyr and reduce rather rapidly afterward, while the optical maturity, OMAT, reduces monotonically with time. We show that in some situations, when not only OMAT but also L and s are incorporated in the estimation utilizing 750 & 950 nm photometry, the age estimation becomes considerably more reliable. We also observed that OMAT and the lunar cratering chronology function (cumulative number of craters larger than a certain diameter as a function of time) have a relatively linear relationship.

• Journal of Preventive Medicine and Public Health
• /
• v.16 no.1
• /
• pp.135-152
• /
• 1983

Emergency medical service is an important part of the health care delivery system, and the optimal allocation of resources and their efficient utilization are essentially demanded. Since these conditions are the prerequisite to prompt treatment which, in turn, will be crucial for life saving and in reducing the undesirable sequelae of the event. This study, taking the hyperbaric chamber for carbon monoxide poisoning as an example, is to develop a stochastic approach for solving the problems of optimal allocation of such emergency medical facility in Korea. The hyperbaric chamber, in Korea, is used almost exclusively for the treatment of acute carbon monoxide poisoning, most of which occur at home, since the coal briquette is used as domestic fuel by 69.6 per cent of the Korean population. The annual incidence rate of the comatous and fatal carbon monoxide poisoning is estimated at 45.5 per 10,000 of coal briquette-using population. It offers a serious public health problem and occupies a large portion of the emergency outpatients, especially in the winter season. The requirement of hyperbaric chambers can be calculated by setting the level of the annual queueing rate, which is here defined as the proportion of the annual number of the queued patients among the annual number of the total patients. The rate is determined by the size of the coal briquette-using population which generate a certain number of carbon monoxide poisoning patients in terms of the annual incidence rate, and the number of hyperbaric chambers per hospital to which the patients are sent, assuming that there is no referral of the patients among hospitals. The queueing occurs due to the conflicting events of the 'arrival' of the patients and the 'service' of the hyperbaric chambers. Here, we can assume that the length of the service time of hyperbaric chambers is fixed at sixty minutes, and the service discipline is based on 'first come, first served'. The arrival pattern of the carbon monoxide poisoning is relatively unique, because it usually occurs while the people are in bed. Diurnal variation of the carbon monoxide poisoning can hardly be formulated mathematically, so empirical cumulative distribution of the probability of the hourly arrival of the patients was used for Monte Carlo simulation to calculate the probability of queueing by the number of the patients per day, for the cases of one, two or three hyperbaric chambers assumed to be available per hospital. Incidence of the carbon monoxide poisoning also has strong seasonal variation, because of the four distinctive seasons in Korea. So the number of the patients per day could not be assumed to be distributed according to the Poisson distribution. Testing the fitness of various distributions of rare event, it turned out to be that the daily distribution of the carbon monoxide poisoning fits well to the Polya-Eggenberger distribution. With this model, we could forecast the number of the poisonings per day by the size of the coal-briquette using population. By combining the probability of queueing by the number of patients per day, and the probability of the number of patients per day in a year, we can estimate the number of the queued patients and the number of the patients in a year by the number of hyperbaric chamber per hospital and by the size of coal briquette-using population. Setting 5 per cent as the annual queueing rate, the required number of hyperbaric chambers was calculated for each province and for the whole country, in the cases of 25, 50, 75 and 100 per cent of the treatment rate which stand for the rate of the patients treated by hyperbaric chamber among the patients who are to be treated. Findings of the study were as follows. 1. Probability of the number of patients per day follows Polya-Eggenberger distribution. $$P(X=\gamma)=\frac{\Pi\limits_{k=1}^\gamma[m+(K-1)\times10.86]}{\gamma!}\times11.86^{-{(\frac{m}{10.86}+\gamma)}}$$ when$${\gamma}=1,2,...,n$$$$P(X=0)=11.86^{-(m/10.86)}$$ when $${\gamma}=0$$ Hourly arrival pattern of the patients turned out to be bimodal, the large peak was observed in $7 : 00{\sim}8 : 00$ a.m., and the small peak in $11 : 00{\sim}12 : 00$ p.m. 2. In the cases of only one or two hyperbaric chambers installed per hospital, the annual queueing rate will be at the level of more than 5 per cent. Only in case of three chambers, however, the rate will reach 5 per cent when the average number of the patients per day is 0.481. 3. According to the results above, a hospital equipped with three hyperbaric chambers will be able to serve 166,485, 83,242, 55,495 and 41,620 of population, when the treatmet rate are 25, 50, 75 and 100 per cent. 4. The required number of hyperbaric chambers are estimated at 483, 963, 1,441 and 1,923 when the treatment rate are taken as 25, 50, 75 and 100 per cent. Therefore, the shortage are respectively turned out to be 312, 791. 1,270 and 1,752. The author believes that the methodology developed in this study will also be applicable to the problems of resource allocation for the other kinds of the emergency medical facilities.

• Management & Information Systems Review
• /
• v.23
• /
• pp.41-74
• /
• 2007

In Korea, corporate merger activities were activated since 1980, and nowadays(particuarly since 1986) the changes in domestic and international economic circumstances have made corporate managers have strong interests in merger. Korea and America have different business environments and it is easily conceivable that there exists many differences in motives, methods, and effects of mergers between the two countries. According to recent studies on takeover bids in America, takeover bids have information effects, tax implications, and co-insurance effects, and the form of payment(cash versus securities), the relative size of target and bidder, the leverage effect, Tobin's q, number of bidders(single versus multiple bidder), the time period (before 1968, 1968-1980, 1981 and later), and the target firm reaction (hostile versus friendly) are important determinants of the magnitude of takeover gains and their distribution between targets and bidders at the announcement of takeover bids. This study examines the theory of takeover bids, the status quo and problems of merger in Korea, and then investigates how the announcement of merger are reflected in common stock returns of bidding firms, finally explores empirically the factors influencing abnormal returns of bidding firms' stock price. The hypotheses of this study are as follows ; Shareholders of bidding firms benefit from mergers. And common stock returns of bidding firms at the announcement of takeover bids, shows significant differences according to the condition of the ratio of target size relative to bidding firm, whether the target being a member of the conglomerate to which bidding firm belongs, whether the target being a listed company, the time period(before 1986, 1986, and later), the number of bidding firm's stock in exchange for a stock of the target, whether the merger being a horizontal and vertical merger or a conglomerate merger, and the ratios of debt to equity capital of target and bidding firm. The data analyzed in this study were drawn from public announcements of proposals to acquire a target firm by means of merger. The sample contains all bidding firms which were listed in the stock market and also engaged in successful mergers in the period 1980 through 1992 for which there are daily stock returns. A merger bid was considered successful if it resulted in a completed merger and the target firm disappeared as a separate entity. The final sample contains 113 acquiring firms. The research hypotheses examined in this study are tested by applying an event-type methodology similar to that described in Dodd and Warner. The ordinary-least-squares coefficients of the market-model regression were estimated over the period t=-135 to t=-16 relative to the date of the proposal's initial announcement, t=0. Daily abnormal common stock returns were calculated for each firm i over the interval t=-15 to t=+15. A daily average abnormal return(AR) for each day t was computed. Average cumulative abnormal returns($CART_{T_1,T_2}$) were also derived by summing the $AR_t's$ over various intervals. The expected values of $AR_t$ and $CART_{T_1,T_2}$ are zero in the absence of abnormal performance. The test statistics of $AR_t$ and $CAR_{T_1,T_2}$ are based on the average standardized abnormal return($ASAR_t$) and the average standardized cumulative abnormal return ($ASCAR_{T_1,T_2}$), respectively. Assuming that the individual abnormal returns are normal and independent across t and across securities, the statistics $Z_t$ and $Z_{T_1,T_2}$ which follow a unit-normal distribution(Dodd and Warner), are used to test the hypotheses that the average standardized abnormal returns and the average cumulative standardized abnormal returns equal zero.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.4
• /
• pp.181-187
• /
• 2005

In this study, a microchip system fabricated with MEMS technology was developed to detect bioelectrical signals. The developed microchip using the conductivity of gold nanoparticles could detect the biopotential with a high sensitivity. For designing the microchip, simulations were performed to understand the effects of the size and number of nanoparticles, and the sensing width between electrodes on the detection of biosignals. Then, a series of experiment was performed to validate the simulation results and understand the feasibility of the proposed microchip design. Both simulation and experimental results showed that as the sensing width between electrodes increased the conductivity decreased. Also, the conductivity increased as the density of gold nanoparticles increased. In addition, it was found that the conductivity that changes with the nanoparticles density could be approximated by a cumulative normal distribution function. The developed microchip system could effectively apply when a biosignals should be measured with a high sensitivity.