• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.110.1-110.1
• /
• 2014

The optics of Space telescope is one of the major parts of space mission used for imaging observation of astronomical targets and the Earth. These kinds of space mission have a bulky and complex opto-mechanics with a long optical tube, but there are attempts have been made to observe a target with a small satellite in many ways. In this paper, we describe an optical design of a reflecting telescope for use in a CubeSat mission. For this design, we adopt the off-axis segmented method of astronomical observation techniques based on the Ritchey-Chr$\acute{e}$tien type telescope. The primary mirror shape is a rectangle with dimensions of $8cm{\times}8cm$, and a secondary mirror has dimensions of $2.4cm{\times}4.1cm$. The focal ratio is 3 which can obtain a $0.3{\times}0.2$ degree diagonal angle in a $1280{\times}800$ CMOS color image sensor with a pixel size of $3{\mu}m{\times}3{\mu}m$. This optical design can capture a ${\sim}4km{\times}{\sim}2.3km$ area of the earth's surface at 700 km altitude operation. Based on this conceptual design, we will keep trying to study more for astronomical observation with Attitude control system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.7
• /
• pp.622-627
• /
• 2014

A pico-class satellite has limitation to generate power from the solar cells due to its limited accommodation area to install the solar cells. The variation of incidence angle between solar panels and sunlight induced by the revolution and rotation of the satellite is one of the key parameters to determine the power generation. In this study, we proposed a concentrating photovoltaic system for pico-class satellite applications to enhance power generation when the ${\beta}$ angle between the sunlight and the solar panel is zero by effectively concentrating solar energy on solar panels. The feasibility of the conceptual idea has been demonstrated by power measurement test using solar simulator and commercial multi-array lens system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.376-379
• /
• 2006

Reaction Wheel Assembly (RWA) is one of the major disturbance sources that have influence upon the Line of Sight (LOS) of payload. A micro-vibration induced by RWA is propagated through the satellite structure and decrease the LOS stability performance of payload. This effect shall be analyzed through the jitter analysis. If a requirement or specification of payload jitter level is found to be not satisfied according to the jitter analysis campaign, some modification or redesign should be done on the satellite structure or a couple of isolator should be attached on the RWA interface in order to reduce the transmitted vibration level of RWA. The purpose of ???RWA isolator test? is to roughly evaluate the performance of vibration suppression level with a passive RWA isolator made of rubber. For this test, actual RWA is used as a vibration source and a couple of cube-shaped rubber mount designed for satellite is used as a passive isolator. There may be several considerations in order to accommodate RWA isolator to spacecraft such as not only vibration reduction performance but also thermal conduction problem, mechanical size, RWA alignment problem, etc. But in this report the feasibility of RWA isolator is analyzed only in a vibration suppression point of view. As a result, high frequency vibration of RWA above 50Hz is perfectly attenuated with isolators, however, first harmonic components below 50Hz became larger due to the additional low frequency resonance modes of roll, pitch, yaw rigid body motion of RWA+bracket.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.9
• /
• pp.779-788
• /
• 2014

The satellite should generate electric power efficiently to perform the mission successfully within limited power. For this reason, the electrical power system of LEO satellites usually regulates the power which is generated from the solar cells using MPPT (Maximum Power Point Tracking) method. This paper proposes advanced MPPT algorithm based on the fuzzy logic applied to small CubeSat satellite. The simulation has been performed to confirm the validity of the proposed method by interlocking between MATLAB/Simulink and STK (Systems Tool Kit). The EBA(Energy Balance Analysis) has also been performed at two different pointing modes of KAUSAT-5 for solar irradiation according to the satellite orbit and attitude, and load capacity varied with operation modes by Simulink and STK. The performance of fuzzy logic-based MPPT algorithm was verified through the EBA. The validity of the proposed MPPT algorithm based on the fuzzy logic was also confirmed by comparing with P&O (Perturbation & Observation) algorithm that is general in the MPPT.

• International Journal of Aeronautical and Space Sciences
• /
• v.3 no.1
• /
• pp.61-73
• /
• 2002

This paper addresses the conceptual design results of the HAUSAT-1 (Hankuk Aviation University SATellite-1), developed by Space System Research Lab. of Hankuk Aviation Univ., which is a new generation picosatellite. This project has been funded by Korean Government for the purpose of developing the space core technology. This is the first attempt at the level of university in Korea to develop the satellite weighing less than 1kg and accelerates opportunities with low construction, low launch cost space experiment platforms. The purpose of the HAUSAT-1 project is to offer graduate and undergraduate students great opportunities to be able to understand the design process of satellite development as a team member. Its mission objectives are to track its position by the GPS receiver system, to deploy the thin film solar cell panel to generate extra power, and to measure plasma density and temperature with the plasma sensor. The HAUSAT-1 will orbit at the altitude of 650 km with 65 degree inclination angle with 12 months of design mission life. It is planned to be launched on November 2003 by Russian launch vehicle "Dnepr".

• Journal of Space Technology and Applications
• /
• v.4 no.2
• /
• pp.137-152
• /
• 2024

Currently, investigations in microgravity environments are carried out in a variety of applications, including drop towers, where experiments can be performed for short periods of time, and space stations, where time is not limited. However, producing a microgravity environment for long-term scientific research requires huge development expenditures and efforts. As a result, if the microgravity experiment is carried out on a cubesat, the variety of scientific studies will likely increase even more due to its low cost. The Korea Microgravity Science Laboratory (KMSL) cubesat, which has these features, is a satellite that has carried out microgravity science missions. On March 22, 2021, the KMSL satellite was launched by a Soyuz2.1a from Baikonur in Kazakhstan and operated normally for nearly two months. This article presents results and lessons gained for successfully completing science missions in microgravity based on the KMSL satellite's operational experience.

• Journal of Aerospace System Engineering
• /
• v.15 no.5
• /
• pp.81-88
• /
• 2021

In general, a non-explosive nylon wire cutting-based holding and release mechanism has been used to store and deploy deployable solar panels of CubeSat. However, with this method, accessing the solar panel's access port for charging the cube satellite's battery and electrical inspection and testing of the PCB and payloads while the solar panel is in storage is difficult. Additionally, the mechanism must have a reliable release function in an in-orbit environment, and reusability for stow and deploy of the solar panel, which is a hassle for the operator and difficult to maintain a consistent nylon wire fastening process. In this study, we proposed a pin-puller-based solar panel holding and release mechanism that can easily deploy a solar panel without cutting nylon wires by separating constraining pins. The proposed mechanism's release function and performance were verified through a solar panel deployment test and a maximum separation load measurement test. Through this, we also verified the design feasibility and effectiveness of the pin-puller-based separation device.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.9
• /
• pp.103-113
• /
• 2004

The satellite is exposed to the severe vibration environments such as random vibration environments such as random vibration, acceleration, shock, and acoustics during launch ascent and transportation. It is also faced with various space environments such as thermal vacuum, radiation and microgravity during the mission life. The satellite should be designed, manufactured, assembled and tested to be able to endure in these harsh environments. This paper addresses the results of the structural and thermal design and analyses for the HAUSAT-1 picosatellite which is scheduled to launch in the first quarter of 2005 by Russian launch vehicle "Dnepr". The qualification vibration and thermal vacuum tests have been conducted and passed at the satellite level to ensure that the HAUSAT-1 mechanical system was designed to be stable with enough margin.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.163-164
• /
• 2017

본 논문에서는 KMSL(Korea Microgravity Science Laboratory) 큐브 위성에 대해 설명하고 전력시스템 설계 연구 방법을 제시한다. 1~3리터 사이즈인 초소형 인공위성(큐브위성)의 전력시스템은 태양 전지 패널로부터 큐브 위성의 부하장치 운용을 위한 전력을 공급받고, 남은 잉여 전력은 배터리에 저장하여 식(eclipse) 구간 동안 전력이 공급될 수 있도록 전력계가 구성된다. 본 논문에서는 조선대학교 KMSL팀의 큐브 위성에 대한 전력시스템을 설계하기 위해서 위성 궤도 및 자세에 따른 생산 전력, 소비 전력을 인공위성의 자세 및 궤도에 따라 분석하고, 부하 장치의 전원 및 소모전력을 통해 전력 및 에너지 마진(margin)이 충분하도록 전력계시스템의 구성품 용량을 설계하였다.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.470-471
• /
• 2018

본 논문에서는 소형 큐브위성의 전력시스템 구성품의 용량 및 위성의 운용로직을 설계할 수 있는 소프트웨어 테스트베드 설계 방법을 제시한다. 기존 초소형 인공위성 시스템 설계를 위한 소프트웨어가 개발되어 상용품으로 판매되고 있으나, 주로 자세제어 시스템의 제어기 설계를 위해 소프트웨어가 사용되고있고, 텍스트기반 복잡한 구조로 되어있어 본 논문의 목적인 전력계 구성품 용량 및 운용로직을 설계하는데 이를 활용하기 어려운 측면이 있었다. 따라서 본 논문에서는 전력시스템의 구성품들을 전력 및 에너지 방정식으로 모델링하여 Matlab/Simulink에서 이를 구현함으로써 가독성을 높여 시스템 설계 및 분석 시간을 줄일 수 있는 소프트웨어 테스트베드 설계방법을 제시한다. 제안된 소프트웨어 테스트베드를 이용한 3리터 사이즈의 소형 큐브위성 시스템의 구성품 용량 및 운용로직 설계 결과를 본 논문에서 제시한다.