• Current Photovoltaic Research
• /
• v.1 no.1
• /
• pp.52-58
• /
• 2013

Two different window-structured $CuInGaSe_2$(CIGS) solar cells, i.e., CIGS/thin-CdS/ZnO:B(sample A) and CIGS/very thin-CdS/Zn(S/O)/ZnO:B(sample B), were prepared, and the diffusivity of Zn, Cd, S, and B atoms, respectively, in the CIGS, ZnO or Zn(S/O) layer was estimated by a theoretical fit to experimental secondary ion mass spectrometer data. Diffusivities of Zn, Cd, S, and B atoms in CIGS were $2.0{\times}10^{-13}(1.5{\times}10^{-13})$, $4.6{\times}10^{-13}(4.4{\times}10^{-13})$, $1.6{\times}10^{-13}(1.8{\times}10^{-13})$, and $1.2{\times}10^{-12}cm^2/s$ at 423K, respectively, where the values in parentheses were obtained from sample B and the others from sample A. The diffusivity of the B atom in a Zn(S/O) of sample B was $2.1{\times}10^{-14}cm^2/sec$. Moreover, the diffusivities of Cd and S atoms diffusing back into ZnO(sample A) or Zn(S/O)(sample A) layers were extremely low at 423K, and the estimated diffusion coefficients were $2.2{\times}10^{-15}cm^2/s$ for Cd and $3.0{\times}10^{-15}cm^2/s$ for S.

• Journal of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.37-43
• /
• 1990

An effect of the spin-orbit coupling interaction of ligand orbitals and the intermixing │3d 〉and│4p > transition metal atomic orbitals on the ground state for a 3$d^9$ system in a strong crystal field of tetragonally distorted tetrahedral symmetry that belongs to the $D_{2d}$ point group has been investigated in this work, applying the degenerate perturbation theory. An LCAO-MO analysis in terms of the known energies of the d-d transitions for the tetragonally distorted $CuCl_4^{2-}$ ion in a single crystal of$Cs_2CuCl_4$shows that the covalent mixing of Cu 3d and ligand Cl 3p orbitals decreases dramatically with increasing Cu 4p contribution. The extent of effect on the energy level splitting for the ground state by the spin-orbit coupling interaction of ligand orbitals decreases significantly in orderTEX>$\Gamma_7(E)\;\to\;\Gamma_6(E)\; >\;\Gamma_7(B_2)\;\to\;\Gamma_6(E)\; >\;\Gamma_7(B_2)\;\to\;\Gamma_7(E)$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.382.2-382.2
• /
• 2014

We explain a method to fabricate multi-layered transparent conductive films (TCF) using graphene oxide (GO), copper powder and polyurethane (PU) solution. The flexible graphene nanosheets (GNSs) serve as nanoscale connection between conductive copper nanoparticles (CuNps) and PU nanofibers, resulting in a highly flexible TCF. To fabricate conductive films with high transmittance, polyurethane (PU) nanofibers were used for a conductive network consisting of CuNps and GNSs (CuNps-GNSs). In this experiment, copper powder and graphene oxides were mixed in deionized water with the ultrasonication for 2 h. NaBH4 solution is used as a reduction agents of CuNps and GNSs (CuNps-GNSs) under a nitrogen atmosphere in the oil bath at 100% for 24 h to mixed. The purified and dispersed CuNp-GNS were obtained in deionized water, and diluted to a 10wt.% based on the contents of GNSs. Polyurethane (PU) nanofibers on a PET substrate were formed by electrospinning method. PET slides coated with the PU nanofibers were immersed into CuNp-GNS solution for several second, rinsed briefly in deionized water, and dried to obtain self-assembled CuNp-GNS/PU films. The morphology of the multi-layered films were characterized with a field emission scanning electron microscope (FE-SEM, Hitachi S-4700) and atomic force microscope (AFM, PSIA XE-100). The electrical property was analysed by the I-V measurement system and the optical property was measured by the UV/VIS spectroscopy.

• Journal of Power System Engineering
• /
• v.8 no.3
• /
• pp.36-43
• /
• 2004

The effect of bath composition, plating condition and plating rate on the magnetic property of electroless Co-Cu-P deposits were investigated. With increasing $CuCl_2$ concentration in the bath, plating rate increased, while the Br value of deposit decreased sharply. Deposited surface were inferiority by the increase pH above 10.5, bath temperature higher than $80^{\circ}C$. Plating reaction had been ceased by the increase of pH above 11, bath temperature higher than $90^{\circ}C$ and under $40^{\circ}C$. The Br value of deposit was uniform with various concentration of complexing agent(sodium citrate) in the bath. The Br value of deposit was almost equal to that found by the addition of stabilizer (thiourea) and accelerator(NaF). The Br value of deposit was uniform in plating time(20min) and heat treatment temperature(below $200^{\circ}C$), and were confirmed to have adequate bath stability for practical use.

• Korean Journal of Environmental Biology
• /
• v.30 no.2
• /
• pp.136-142
• /
• 2012

Acute toxicity test of heavy metal (Cd, Cu, Zn) were examined using the hatching rates of fertilized eggs in the oliver flounder, Paralichthys olivaceus. Eggs were exposed to Cd, Cu, Zn (0, 10, 100, 500, 1000, 2500, 5000 ppb) and then normal hatching rates were investigated after 48 h. The normal hatching rates in the control condition (not including Cd, Cu and Zn) were greater than 80%, but suddenly decreased with increasing of heavy metal concentrations. Cd, Cu and Zn reduced the normal hatching rates in concentration-dependent way and a significant reduction occurred at concentration grater than 1000, 100, 100 ppb, respectively. The ranking of heavy metal toxicity was Zn>Cu>Cd, with $EC_{50}$ values of 584, 1015 and 1282 ppb, respectively. The no-observed-effect-concentration (NOEC) and the lowest-observed-effect-concentration (LOEC) showed each 100 and 500 ppb of normal hatching rates in exposed to Cu and Zn. The NOEC and LOEC of normal hatching rates in Cd were 500 ppb and 1000 ppb, respectively. From these results, the normal hatching rates of P. olivaceus have toxic effect at greater than the 100 ppb concentrations in Cu, Zn and the 500 ppb concentrations in Cd in natural ecosystems. These results suggest that biological assay using the normal hatching rates of P. olivaceus are very useful test method for the acute toxicity assessment of a toxic substance as heavy metal in marine ecosystems.

• Journal of Welding and Joining
• /
• v.13 no.2
• /
• pp.122-131
• /
• 1995

The effects of cooling rate on the microstructures, precipitation of Cu-cluster, .epsilon.-Cu and impact toughness of high strength low alloy(HSLA) steel were studied using hardness tester, impact tester, DSC(differential scanning calorimetry), AES(auger electron spectroscopy) and TEM(transmission electron microscopy). Not only the Cu-precipitates but also the segregation of Cu, As, Sb, P, S, N, Sn along grain boundary were not observed at the specimens heat treated from 800.deg. C to 300.deg. C with the cooling time of 12-125 sec. The Cu-cluster, .epsilon.-Cu are formed by introducing ageing after cooling and the effect of precipitates on hardening increase after cooling was the same in all cooling rate. The peak hardness was obtained at an ageing of 500.deg. C in all cooling conditions. The impact energy become higher as the cooling time increases. This fact can be explained to be due to the tempering effect applied on the cooling stage since the present alloy has a relatively high Ms temperature and the local high concentration of the retained austenite.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.2
• /
• pp.47-53
• /
• 2015

The effects of electroless nickel immersion gold (ENIG) and organic solderability preservative (OSP) surface finishes on the in-situ intermetallics reaction and the electromigration (EM) reliability of Sn-3.0Ag-0.5Cu (SAC305) solder bump were systematically investigated. After as-bonded, $(Cu,Ni)_6Sn_5$ intermetallic compound (IMC) was formed at the interface of the ENIG surface finish at solder top side, while at the OSP surface finish at solder bottom side,$ Cu_6Sn_5$ and $Cu_3Sn$ IMCs were formed. Mean time to failure on SAC305 solder bump at $130^{\circ}C$ with a current density of $5.0{\times}10^3A/cm^2$ was 78.7 hrs. EM open failure was observed at bottom OSP surface finish by fast consumption of Cu atoms when electrons flow from bottom Cu substrate to solder. In-situ scanning electron microscope analysis showed that IMC growth rate of ENIG surface finish was much lower than that of the OSP surface finish. Therefore, EM reliability of ENIG surface finish was higher than that of OSP surface finish due to its superior barrier stability to IMC reaction.

• Progress in Superconductivity and Cryogenics
• /
• v.5 no.3
• /
• pp.1-5
• /
• 2003

The effect of CeO$_2$ coating on the surface nucleation of the top-seeded melt-growth processed YBCO superconductors was studied. It was effective that the coating of Y123 compact surfaces by CeO$_2$ powder suppressed the undesirable subsidiary YBa$_2$Cu$_3$O$_{7-y}$ (Y123) nucleation during melt processing. BaCeO$_3$ was formed in the CeO$_2$-coated layers, which might cause a CuO-excessive liquid at the partial melt stage of $Y_2$BaCuO$_{5}$(Y211) plus liquid, and thus the Y123 nucleation at the YBCO compact surfaces could be suppressed during the melt growth of Y123 grain. In addition, the CeO$_2$ refined the Y211 particles near the compact / coating interface. While the levitation forces of the top surfaces with and without CeO$_2$ coating were similar to each other, the levitation force of the interior of the CeO$_2$ coated sample was higher than that of the interior of the sample without CeO$_2$ coating, which was attributed to the suppression of subsidiary Y123 nucleation at the compact walls.s.s.

• Applied Microscopy
• /
• v.38 no.1
• /
• pp.63-72
• /
• 2008

The iterative wave-function reconstruction (IWFR) method developed by Allen et al. (2004) was reviewed with concern for its applicability. The high resolution transmission electron microscopy (HRTEM) studies of the materials such as GaAs, $YBa_2Cu_3O_7$ and $Al_2CuMg$ reported in the literature were utilized in this review. In this process the basis of validity, the limiting conditions and the information limit of this method were discussed. It was particularly noted that the phase contrast image of the exit plane wave evaluated from this method reveals not only $C_s$-corrected atomic resolution within information limit, but also strong tendency of contrast proportional to the magnitude of the atomic number of compositional atoms in a crystal.

• Laser Solutions
• /
• v.17 no.4
• /
• pp.7-13
• /
• 2014

In this work, the application of laser induced breakdown spectroscopy (LIBS) for the composition analysis of thin $Cu(In,Ga)Se_2$ (CIGS) solar cell films ($1-2{\mu}m$ thickness) is reported. For the ablation of CIGS films, femtosecond (fs) laser (wavelength = 343nm, pulse width = 500fs) and nanosecond (ns) laser (wavelength = 266nm, pulse width = 5ns) were used under atmospheric environment. The emission spectra were detected with an intensified charge coupled device (ICCD) spectrometer and multichannel CCD spectrometer for fs-LIBS and ns-LIBS, respectively. The calibration curves for fs-LIBS and ns-LIBS intensity ratios of Ga/Cu, In/Cu, and Ga/In were generated with respect to the concentration ratios measured by inductively coupled plasma optical emission spectrometry (ICP-OES).