• Economic and Environmental Geology
• /
• v.31 no.5
• /
• pp.375-388
• /
• 1998

The purpose of this study is to investigate the ore genesis and occurrence of the Wondong polymetallic mineral deposits. The Pb-Zn, Fe and W-Mo mineralizations are found in skarn zones which formed mainly in or along the fault shear zones with the $N25-40^{\circ}W$ and $N10-50^{\circ}E$ directions, whereas the Cu-Mo mineralization is appeared hydrothermal replacement zone. The skarn minerals consist mainly of garnet and epidote, which were the last alteration phases between pneumatolytic and hydrothermal stages. The mineral paragenesis toward the late stage are as follows: arsenopyrite, scheelite, magnetite, pyrite, pyrrhotite, sphalerite, galena, chalcopyrite and molybdenite. Average ore grades are 0.33 g/t Au, 46.29 g/t Ag, 0.06% Cu, 4.4% Pb, 2.61% Zn and 29.39% Fe in tunnels, and 0.31 % Cu, 0.52% Pb, 6.29% Zn, 29.29% Fe, 0.03% Mo and 0.12% $WO_3$ in drill cores. Fluid inclusion data shows that Type I (liquid-rich), Type II (vapor-rich) and Type III (halite-bearing) inclusions are coexisted and their homogenization temperatures are quite similar. This indicates that boiling conditions have been reached during the mineralization. It is also likely that the ore solutions were evolved through the mixing between magmatic and meteoric waters. Rhyolite and quartz porphyry far the mineralization probably are not responsible of the Wondong polymetallic mineral deposits.

• Journal of the Korean institute of surface engineering
• /
• v.54 no.1
• /
• pp.1-11
• /
• 2021

Porous dendrite structure AuCu alloy was formed using a hydrogen bubble template (HBT) technique by electroplating to improve the catalytic performance of gold, known as an excellent oxygen reduction reaction (ORR) catalyst in alkaline medium. The rich Au surface was maximized by selectively electrochemical etching Cu on the AuCu dendrite surface well formed in a leaf shape. The catalytic activity is mainly due to the synergistic effect of Au and Cu existing on the surface and inside of the particle. Au helps desorption of OH- and Cu contributes to the activation of O2 molecule. Therefore, the porous AuCu dendrite alloy catalyst showed markedly improved catalytic activity compared to the monometallic system. The porous structure AuCu formed by the hydrogen bubble template was able to control the size of the pores according to the formation time and applied current. In addition, the Au-rich surface area increased by selectively removing Cu through electrochemical etching was measured using an electrochemical calculation method (ECSA). The results of this study suggest that the alloying of porous AuCu dendrites and selective Cu dissolution treatment induces an internal alloying effect and a large specific surface area to improve catalyst performance.

• BMB Reports
• /
• v.28 no.3
• /
• pp.254-260
• /
• 1995

Cytochrome oxidase was purified from bovine-heart mitochondria and its enzymatic properties were examined. The purified cytochrome oxidase was identified by its absorption spectrum and chromatogram through gel filtration. The specific activity, purification degree and yield of purified cytochrome oxidase were 18 nmol/mg/ml/min, 24.83 fold and 0.93%, respectively. The activity of the enzyme assayed by a ferrocytochrome $c-O_2$ system was optimized at $25^{\circ}C$ and pH 6.5. Examining the effect of nonionic detergents established that cytochrome oxidase was deactivated by Triton X-100. The oxidase was activated by Tween 80 and deactivated by Tween 20. The Michaelis constant and maximum velocity of the oxidase for ferrocytochrome c were 0.032~0.044 mM and 0.019~0.021 mM/min, respectively. After adaption to basal diet for a week, experimental diets containing 6 mg Cu/kg, or zero mg Cu/kg, or 12 mg Cu/kg were fed to a control group, a copper-free group and a copper-rich group of Sprague-Dawley rats, respectively, for 4 weeks. The specific activities assayed for the ferrocytochrome $c-O_2$ system of isolated cytochrome oxidase from the rat liver of control, copper-free, and copper-rich group were 1.00, 1.19, and 0.878 nmol/mg/ml/min, respectively. Their degrees of purification were 11.38, 10.82 and 8.78 fold, respectively. The specific activities for liver and heart mitochondrial cytochrome oxidase of copper-free/copper-rich groups assayed using the ferrocytochrome $c-O_2$ system were 81.4% and 96.4%/64.1% and 61.1%, respectively, compared with those of the control.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1289-1290
• /
• 2008

Programmable Metallization Cell (PMC) is a memory device based on the electrolytical characteristic of chalcogenide materials. In this study, we investigate the nature of thin films formed by photo doping of Cu ions into chalcogenide materials for use in solid electrolyte of programmable metallization cell devices. We were able to do more economical approach by using copper which play an electrolyte ions role. The results imply that a Cu-rich phase separates owing to the reaction of Cu with free atoms from chalcogenide materials.

• Journal of Powder Materials
• /
• v.4 no.3
• /
• pp.196-204
• /
• 1997

Joining of AIN ceramics to W and Cu by active-metal brazing method was tried with use of (Ag-Cu)-Ti alloy as insert-metal. Joints were produced under various conditions of temperature, holding time and Ti-content in (Ag-Cu) alloy Reaction and microstructural development in bonded interface were investigated through observation and analysis by SEM/EDS, EPMA and XRD. Joint strengths were measured by shear test. Bonded interface consists of two layers: an insert-metal layer of eutectic Ag- and Cu-rich phases and a reaction layer of TiN. Thickness of reaction layer increases with bonding temperature, holding time and Ti-content of insert-metal. It was confirmed that the growth of reaction layer is a diffusion-controlled process. Activation energy for this process was 260 KJ/mol which is lower than that for N diffusion in TiN. Maximum shear strength of 108 MPa and 72 MPa were obtained for AIN/W and AIN/Cu joints, respectively. Relationship between processing variables, joint strength and thickness of reaction layer was also explained.

• Journal of Powder Materials
• /
• v.25 no.1
• /
• pp.19-24
• /
• 2018

Cu-Fe alloys (CFAs) are much anticipated for use in electrical contacts, magnetic recorders, and sensors. The low cost of Fe has inspired the investigation of these alloys as possible replacements for high-cost Cu-Nb and Cu-Ag alloys. Here, alloys of Cu and Fe having compositions of $Cu_{100-x}Fe_x$ (x = 10, 30, and 50 wt.%) are prepared by gas atomization and characterized microstructurally and structurally based on composition and powder size with scanning electron microscopy (SEM) and X-ray diffraction (XRD). Grain sizes and Fe-rich particle sizes are measured and relationships among composition, powder size, and grain size are established. Same-sized powders of different compositions yield different microstructures, as do differently sized powders of equal composition. No atomic-level alloying is observed in the CFAs under the experimental conditions.

• The Korean Journal of Ceramics
• /
• v.6 no.2
• /
• pp.164-167
• /
• 2000

The barium rich region of the Y-Ba-Cu-O-C system includes a tetragonal perovskite-like phase, which possesses a wide homogeneity region toward yttrium, copper and carbonate ion on the one hand, and toward oxygen, on the other hand. Accounting for vacancies ($\square$-vacancy) this phase could be described by the general formula per unit cell: {Ba$_8$}[Y$_{3-z}$Cu$_{5-x}$$(CO_3)_n$ $\square$$_{x+x-n}$]O$_{y{\pm}{\delta}y}$ (*). Here, cube-octahedral sites are represented in braces, while quasioctahedral ones with proper octahedral (Y, Cul), square (Cu2) and triangular (CO$_3$) configuration are shown in square brackets. The formula (*) was confirmed by full-profile Rietveld refinement based on X-ray diffraction data of YBa$_{5}$Cu$_2$O$_y$ (1-5-2 phase). Homogeneity region limits of the phase (*) at 96$0^{\circ}C$ in air were determined to be -0.33$\leq$x$\leq$1.80, 0.33$\leq$z$\leq$2.00, 0$\leq$n$\leq$3.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.104-107
• /
• 2001

In order to investigate the effect of Ge addition to the Cu matrix on the microstructure and the critical current density, four kinds of internal tin processed Nb$_3$Sn strands with pure Cu and Cu 0.2, 0.4, 0.6 wt % Ge alloys were drawn to 0.8 mm diameter. The microstructure and critical current of internal tin processed Nb$_3$Sn wires that were heat treated at temperatures ranging from 68$0^{\circ}C$ to 74$0^{\circ}C$ for 240h were investigated. The Ge addition to the matrix did not make workability worse. A Ge rich layer in the Cu-Ge matrix suppressed the growth of the Nb$_3$Sn layer and promoted grain coarsening. The greater the Ge content in the matrix, the lower the net Jc result after Nb$_3$sn reaction heat treatment. There was no significant variation in Jc observed with heat treatment temperature ranging from 68$0^{\circ}C$ to 74$0^{\circ}C$. The values of AC loss of Ge added wires were decreased to 40 % compare with no addition wire. Low AC loss was due to segregation of Ge rich layer in the Cu-Ge matrix. If Ge added wire with thin Nb filaments were fabricated, slow diffusion rate of Sn would be overcome and decreased AC loss that is weak Point of internal tin method.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.2
• /
• pp.169-177
• /
• 1994

Dilute Al-Cu and Al-Mg alloys were solidified unidirectionally upward by Bridgman method. It is necessary that solute concentration of initial melt is uniform to be able to control the concentration of crystal. When solute concentration is not uniform, it can cause unusual macro-segregation in grown solid. A non-steady state solidification was observed where the solute concentration in the grown solid decreased with the progress of solidification, when a dilute Al-Cu melt with positive axial temeprature gradient was solidified. This was caused by leaking out of Cu-rich melt into the gap between ingot and crucible during melt-down and its sedimentation after complete melting. In the case of Al-Mg alloy, the solute concentration has a minimum in the middle of grown specimen because Mg-rich melt flowed down the gap between ingot and crucible and floated after complete melting. Uniform initial melt concentration can be achieved by the homogenization of the ingot or by the absence of the gap between ingot and crucible.

• 보존과학연구
• /
• s.10
• /
• pp.1-40
• /
• 1989

Between 1976 and 1984 approximately 26.7 tons of Chinese coins were recovered from a shipwreck which was found at the seabed of the Shin an area in the south-western coast of the Korean peninsula. Elements, Cu, Pb, Sn, Fe, Sb, As, Zn, Ag, Ni, Co and Mn, of 54 pieces of the coins were determined by Inductively Coupled Plasma Atomic Emission Spectroscopy(ICP-AIS). The result shows that Ch, Pb, and Sn were found to be major elements roughly the coins with the ratio of 7 : 2 : 1, respectively. Trace elements were classified into 3 levels according to the avarage concentration : Fe,As and Sb(0.1-0.5%), Ag, Mi, Co and Zn(100-1000ppm) and Mn(10ppm). Some systematic tendencies are observed in the composition change with a function of their minting ages .The Wuzhu coins(오수전) from the Eastern Han dynasty(A.D.25-219 )are much more abundant in Cu than the coins of Tang dynasty(A.D.618-907) and later periods. Major element compositions of the Kai -tong Vuan-Bao(개통원보) coins from the Tang dynasty, were remarkably variable. In general, however, the Tang dynasty coins were much more abundant in Cu than the Song dynasty(A.S.S60-1279) coins. The amount of major elements Cu and Sn decreases while that of Pb in creasesby passage of age from the Bei Song dynasty(A.D.960-1127) to later Nam Song dynasty (A.D.1127-1279 ). It means that the quality of coins mere degraded. The amounts of trace elemends(Fe, As, Co, Hn) increases with the above age. High amounts of trace elements are supposed to be a reflection of immaturity of minting techniques or use of impurity-rich raw materials. The Jin dynasty(A.D.1125-1234) coins are found to be rich in Sn and thus contain Pb as the third component. It is quite different from the coins of the Song dynasty. The Zhi-dai Tong-Bao(지대통보) coins of the Yuan dynasty from A.0.1310 are much more abundant in Cu and Sn than those of the Nam Song dynasty .