• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.30-32
• /
• 2012

본 연구에서는 Cu, Mn을 함침 시킨 상용 제올라이트13X 촉매에 CO 산화 전환 반응에 영향을 연구하였다. 촉매 제조는 담지량별로 Cu, Mn을 서로 다른 비율로 물리 혼합하여 상용 제올라이트에 담지하였다. 함침방법은 과잉용액 함침법을 사용하였고, 건조 후 공기분위기에서 소성하여 산화물 형태로 담지하였다. 기본적인 촉매 특성은 X-선 회절분석, 질소흡탈착 등온곡선을 이용하여 기공크기, 기공부피, 비표면적을 구하였으며, FT-IR, 주사현미경, $NH_3$-TPD/TPR, EDX로 특성을 분석하였다. 촉매 산화반응 실험은 고정층 반응기에서 수행하였으며, 외경1/4 inch(내경 4 mm)석영관에 촉매를 중진하고 Gas Chromatograph로 배출가스를 측정하여 Cu-Mn 제올라이트 촉매의 일산화탄소 산화반응을 연구하였다. 일산화탄소 농도, 온도 및 공간속도, Cu-Mn 함량 비율에 따른 산화반응 실험을 수행하여 최적 산화조건과 촉매를 도출하였다.

• Journal of the Korean Magnetics Society
• /
• v.1 no.2
• /
• pp.37-41
• /
• 1991

Amorphous $Fe_{68.5}Co_5M_3Cu_1Si_{13.5}B_9(M=Nb, Mo, Mn, Cr)$ alloys were prepared by using rapidly quenching techinque and were annealed above their crystallization temperatures. Coercive force, initial permeability and AC power loss of the annealed $Fe_{68.5}Co_5M_3Cu_1Si_{13.5}B_9(M=Nb, Mo, Mn, Cr)$ alloys have been studied systematically. Nanocrystallines are formed in the annealed alloys which include Mo and Nb. Remarkably improved soft magnetic properties are obtained in the alloys whose average grain size is around 10 nm. However, soft magnetic properties of the alloys are degraded when grain size is less than IOnm or larger than 15nm. It is considered that the degradation of soft magnetic properties in the alloys whose average grain size is less than 10 nm is due to the Fe-rich amorphous phase retained at grain boundary during the initial crystallization process.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.8
• /
• pp.665-670
• /
• 2009

Lead-free piezoelectric ($Na_{1/2}K_{1/2}$)$NbO_3$ ceramics doped with CuO and $MnO_2$ were fabricated using the conventional oxide-mixing technique. With increasing content of CuO and $MnO_2$, the dielectric constant(${\varepsilon}_{33}$) and mechanical quality factor($Q_m$) value increased, while electromechanical coupling factor($K_p$) and piezoelectric constant($d_{33}$) decreased. The piezoelectric and dielectric properties ($Na_{1/2}K_{1/2}$)$NbO_3$ ceramics doped with CuO 2.461 wt% and $MnO_2$ 0.538 wt% at sintered temperature $1050\;^{\circ}C$ were attained ${\varepsilon}_{33}$ = 403, $K_p$ = 15, $Q_m$ = 122 and $d_{33}$ = 36 pC/N. Based on response surface methodology results using design of experiment, it was concluded that ($Na_{1/2}K_{1/2}$)$NbO_3$ doped with CuO 0.477 wt% and $MnO_2$ 0.269 wt% has possibility composition of being used for piezoelectric transformer.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.2 no.2 s.2
• /
• pp.93-100
• /
• 2004

This study is to measure the heavy metal content of permanent wave products which on marketing correctly as estimating the extent of exposure by a hair permanent wave scientifically. We would like to prevent an affair from arising health obstruction as to the heavy metal who is using those and also show the basic data for proposing the new standard. The results were as follows.: in case of the average heavy metal content for a wave type thioglycol acid ingredient includes 1.61ppm(Pb), 0.03ppm(Cd), 0.05ppm(Ni), 0.27ppm(Mn), 0.82ppm(Cu) and those were recognized the significant gap between products all the heavy metals. In case of a cysteine acid ingredient includes 0.86ppm(Pb), 0.01ppm(Cd), 0.05ppm(Ni), 0.20ppm(Mn) and 0.66ppm(Cu) and those were recognized the significant gap between products except a nickel. Straight type of permanent wave reductant includes 2.11ppm(Pb), 0.01ppm(Cd), 0.27ppm(Ni), 0.66ppm(Mn), 2.53ppm(Cu) and those were recognized the significant gap between products all the heavy metals. Permanent wave reducing agent includes 1.43ppm(Pb), 0.01ppm(Cd), 0.09ppm(Ni), 0.66ppm(Mn), 0.75ppm(Cu) and those were approved the significant gap between products except a cadmium. Exposure level of the heavy metal contents per onetime permanent waving were 242.3ppm(Pb), 2.5ppm(Cd), 17.7ppm(Ni), 89.0ppm(Mn), 174.7ppm(Cu).

• Clean Technology
• /
• v.18 no.3
• /
• pp.259-264
• /
• 2012

Perovskite-type oxides were successfully prepared using malic acid method, characterized by TG/DTA, XRD, XPS, TEM and $H_2$-TPR and their catalytic activities for the combustion of benzene were determined. Almost of catalyst showed perovskite crystalline phase and 15-70 nm particle size. The $LaMnO_3$ catalysts showed the highest activity and the conversion reaches almost 100% at $350^{\circ}C$. The catalysts were modified to enhance the activity through substitution of metal into the A or B site of the perovskite oxides. In the $LaMnO_3$-type catalyst, the partial substitution of Sr into site the A-site enhanced the catalytic activity in the benzene combustion. In addition, the partial substitution of Co or Cu into site the B-site also enhanced the catalytic activity and the catalytic activity was in the order of Co > Cu > Fe in the $LaMn_{1-x}B_xO_3$ (B = Co, Fe, Cu) type catalyst.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4250-4256
• /
• 2011

Mn catalyst promoted with Cu were prepared and tested for selective catalytic reduction of $NO_x$ with $NH_3$. Performance of each catalyst was investigated for $NO_x$ activity while changing temperature, space velocity, water content and $O_2$ concentration. Hydrogen conversion efficiency of catalyst was also measured in the $H_2$-TPR system. The inhibition effect of water on catalyst was investigated with the on-off control of water supply. High activity of Mn-Cu catalyst was observed for $160{\sim}260^{\circ}C$. It is found that increase of oxygen concentration acts as a promotor to the increase of catalyst activity but water content acts as a inhibitor.

• The Korean Journal of Zoology
• /
• v.23 no.3
• /
• pp.137-148
• /
• 1980

The effects of divalent cations, $Hg^{2+}, Cu^{2+}, Pb^{2+}, Cd^{2+}$, and $Mn^{2+}$ on the total ATPase activity of the fragmented sarcoplasmic reticulum isolated from rabbit skeletal muscle were investigated. The inhibitory effects of the cations on the enzyme activity increased as the concentrations of the ions increased with the order of efficiency of $Hg^{2+}$ > $Cu^{2+}$ > $Pb^{2+}$ > $Cd^{2+}$ > $Mn^{2+}$ in the concentration range between 10 and 500$\mu$M. The 50% inhibition for each ion was almost identical with the inhibition constant (Ki) value for each ion. The Ki's were 10, 30 130, and 350$\mu$M for $Hg^{2+}, Cu^{2+}, Pb^{2+}, and Cd^{2+}$, respectively. $Mn^{2+}$ seemed to be an activator at lower concentrations and an inhibitor at higher concentrations. The presence of the cations did not change the Km values, suggesting that the ions act as a reversible noncompetitive inhibitor on the FSR ATPase. The energy of activation of the enzyme was aproximately 19 Kcal/mole. The presence of the ions decreased the value slightly. A possible mechanism for the reversible noncompetitive inhibitory effect of the cations was discussed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.1
• /
• pp.99-105
• /
• 2000

The purpose of this study was to evaluat the Zn, Cu, Mn and Ni status and correlation of their concentrations in serum, urine, hair and fingernail in female college students. As the results are follows; The mean age of subjects was 22.5 years and height, weight and BMI were 160.1 cm, 51.0 kg and 20.0 respectively. The daily intake of energy 1769.5 kcal and the ratio of carbohydrate, fat and protein for energy is 60 : 20 : 15. The daily intake of energy (88.5%), vitamin B2 (86.1%), Ca (75.4%), Fe (58.3%) and Zn (63.0%) of subjects did not reach to Korean Recommended Dietary Allowance (RDA). The daily mean intake of Zn, Cu, Mn and Ni were 7.56 mg, 2.30 mg, 3.81 mg and 0.18 mg respectively. The concentrations of Zn in serum, urine, hair and nail were 85.6$\mu\textrm{g}$/dL, 391.2$\mu\textrm{g}$/day, 174.6$\mu\textrm{g}$/g and 102.4$\mu\textrm{g}$/g respectively and those Cu were 84.2$\mu\textrm{g}$/dL, 56.6 $\mu\textrm{g}$/day, 20.3$\mu\textrm{g}$/g and 4.3$\mu\textrm{g}$/g respectively. The concentrations of Mn in serum, urine, hari and nail were 0.2$\mu\textrm{g}$/dL, 1.1$\mu\textrm{g}$/day, 1.8$\mu\textrm{g}$/g and 1.6$\mu\textrm{g}$/g respectively and those of Ni were 0.6$\mu\textrm{g}$/dL, 24.5$\mu\textrm{g}$/day, 3.5$\mu\textrm{g}$/g and 3.1$\mu\textrm{g}$/g respectively. The daily intake of Mn showed the positive correlations with concentration of Mn in hair (p<0.05) and the daily intake of Ni was positively correlated with urinary exretion (p<0.05) and hair contents (p<0.001) of Ni. The more detailed studies about these trace mineral status should be required.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.4
• /
• pp.347-360
• /
• 2015

Trace metals(As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Pb and Zn) concentrations in surface sediments of Jinhae bay in August of 2013 were measured to investigate the characteristics of trace metals distribution and to evaluate the metal pollution. Assessment for metal pollution was carried out using the sediment quality guidelines(SQGs) such as threshold effects level(TEL) and probable effects level(PEL) proposed by the ministry of onceans and fisheries(MOF) in Korea and geochemical assessment techniques(enrichment factor(EF) and geoaccumulation index ($I_{geo}$)). The mean concentration of trace metals in the sediments are as follows: 11.1 mg/kg for As, 0.52 mg/kg for Cd, 14.1 mg/kg for Co, 69.8 mg/kg for Cr, 57.2 mg/kg for Cu, 3.7 % for Fe, 0.064 mg/kg for Hg, 600 mg/kg for Mn, 40.1 mg/kg for Pb, 167.2 mg/kg for Zn. The spatial distributions of As, Co, Cr and Fe were not distinguished clearly in whole area. However, Cd, Hg, Pb and Zn were high in northern area of bay, and Cu and Mn were high in southeastern and eastern area of bay, respectively. The distribution pattern of trace metals, correlation matrix and R-mode factor analyses results revealed that the distribution of trace metals were mainly effected by the sediment grain size(Co, Cr and Fe), redox condition of sediments(Mn) and anthropogenic factors(As, Cd, Cu, Hg, Pb and Zn). Comparing the concentrations of several trace metals(As, Cd, Cr, Hg and Pb) with SQGs from Korea(TEL and PEL), the concentrations of Hg, Cd and Pb in sediment of northern area of bay were higher than TEL. EF and $I_{geo}$ values of As, Cd, Cu, Hg, Mn, Pb and Zn showed that these metals in sediments are enriched by anthropogenic activities in some areas, and pollution status for Cd, Hg and Pb in northern area and Cu in southeastern area of bay were concerned about current level, although those for As, Mn and Zn were not.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.1
• /
• pp.1-10
• /
• 2004

This pot experiment was conducted to investigate the effects of combined micronutrient application($T_1$;control, $T_2$; Fe, $T_3$; Fe＋Mn, $T_4$; Fe＋Mn＋Cu, $T_5$ ; Fe＋Mn＋Cu＋Zn, $T_6$ ; Fe＋Mn＋Cu＋Zn＋Mo, $T_7$ ; Fe＋Mn＋Cu＋Zn＋Mo＋B) on forage performance of pure and mixed cultures of orchardgrass and white clover. The third part was concerned with the changes in the contents and yields of N-compounds (crude/pure protein and soluble N-compounds) in forages. The results obtained are summarized as follows: 1. The contents of N-compounds(crude/pure protein and soluble N-compounds) were generally different according to the forage species, whether it was a pure or mixed culture, and additional fertilization, especially N. In orchardgrass, these contents were relatively low at the $T_3$ and $T_6$ in both pure and mixed cultures. In white clover, these contents were relatively decreased by the $T_1$, $T_3$, and $T_6$ in mixed culture. 2. The treatments influenced relatively more on the yields of crude/pure protein than on the dry matter yields of forages, and this tendency was more significant in white clover than in orchardgrass. 3. In white clover, the great differences in the yields of crude protein by the treatments occurred especially in mixed culture and at 5th cut without no additional fertilization. In white clover, the positive effects of optimum treatments on the yields of crude protein seemed to be decreased by the additional fertilization, especially N. In mixed culture, the favorable growth of white clover by the optimum treatments tended to be positively related to the favorable contents and yields of N-compounds. The changes in the yields of pure protein were similar to the tendency of crude protein