• Journal of Applied Biological Chemistry
• /
• v.58 no.1
• /
• pp.65-74
• /
• 2015

X-ray absorption fine structure (XAFS) analysis using X-ray absorption spectroscopy is being applied as a state-of-the-art method in a wide range of disciplines. This review article summarizes the overall procedure of XAFS analysis from the preparation of soil samples to the analysis of data in X-ray absorption near edge structure (XANES) region and extended Xray absorption fine structure (EXAFS) region. The previous studies on application of XANES and EXAFS techniques in environmental soil science field are discussed and classified them according to metal(loid)s (As, Cd, Cu, Ni, Pb, and Zn). A significant number of previous studies of XAFS application in the environmental soil science field have focused on the identification of Pb chemical species in soil. Moreover, XANES and EXAFS techniques have been widely used to investigate the contamination source via identification of metal species. Similarly, these techniques were applied to identify the mechanisms of metal stabilization in soil after application of various amendments, phytoremediation, etc.

• Radiation Oncology Journal
• /
• v.30 no.2
• /
• pp.78-87
• /
• 2012

Purpose: Troglitazone (TRO) is a peroxisome proliferator-activated receptor ${\gamma}$ ($PPAR{\gamma}$) agonist. TRO has antiproliferative activity on many kinds of cancer cells via G1 arrest. TRO also increases $Cu^{2+}/Zn^{2+}$-superoxide dismutase (CuZnSOD) and catalase. Cell cycle, and SOD and catalase may affect on radiation sensitivity. We investigated the effect of TRO on radiation sensitivity in cancer cells in vitro. Materials and Methods: Three human cervix cancer cell lines (HeLa, Me180, and SiHa) were used. The protein expressions of SOD and catalase, and catalase activities were measured at 2-10 ${\mu}M$ of TRO for 24 hours. Cell cycle was evaluated with flow cytometry. Reactive oxygen species (ROS) was measured using 2',7'-dichlorofluorescin diacetate. Cell survival by radiation was measured with clonogenic assay. Results: By 5 ${\mu}M$ TRO for 24 hours, the mRNA, protein expression and activity of catalase were increased in all three cell lines. G0-G1 phase cells were increased in HeLa and Me180 by 5 ${\mu}M$ TRO for 24 hours, but those were not increased in SiHa. By pretreatment with 5 ${\mu}M$ TRO radiation sensitivity was increased in HeLa and Me180, but it was decreased in SiHa. In Me180, with 2 ${\mu}M$ TRO which increased catalase but not increased G0-G1 cells, radiosensitization was not observed. ROS produced by radiation was decreased with TRO. Conclusion: TRO increases radiation sensitivity through G0-G1 arrest or decreases radiation sensitivity through catalase-mediated ROS scavenging according to TRO dose or cell types. The change of radiation sensitivity by combined with TRO is not dependent on the PPAR ${\gamma}$ expression level.

• Resources Recycling
• /
• v.27 no.3
• /
• pp.16-29
• /
• 2018

In this study, metal and nonmetal contents and their economic values in ICT devices such as smart phones and laptop computers were evaluated. The electronic devices made by LG and Samsung were disassembled into 5 parts, which are printed circuit board assembly, battery, display, case and other electronic components. Metal and nonmetal contents in these parts were analyzed, and their economic values were calculated via multiplying the materials' contents by metal price obtained from KOMIS or nonmetal exchange price acquired from Korean recycling markets. Finally, the materials' contents and values according to each electronic parts and electronic devices were calculated. The results showed that the value of the smartphones and laptop computers of LG are 4,449.6 KRW (28,506 KRW/kg) and 6,830.2 KRW (7,053 KRW/kg), and those of Samsung are 1,849.3 KRW (13,499 KRW/kg) and 6,667.5 KRW (4,831 KRW/kg), respectively. It was also found that most of the value was concentrated in batteries and printed circuit board assemblies. In addition, Co, Au and Cu were found to be the most valuable resources in the devices.

• Korean Journal of Medicinal Crop Science
• /
• v.26 no.5
• /
• pp.382-390
• /
• 2018

Background: The plant Aster koraiensis has long been used as an ingredient in folk medicine. It has been reported that Aster koraiensis extract (AKE) prevents the progression of diabetes-induced retinopathy and nephropathy. However, although these beneficial effects of AKE on diabetes complications have been identified, the antidiabetic effects of AKE have not yet been completely investigated and quantified. In the present study, the glucose-lowering and antioxidant effects of aqueous and ethanolic AKEs were evaluated. Methods and Results: The glucose-lowering effects of aqueous and ethanolic (30%-, 50%-, and 80%-ethanol) AKEs were investigated via ${\alpha}$-glucosidase inhibitory assays. The mode of inhibition by AKEs on ${\alpha}$-glucosidase was identified through kinetic analysis. The total antioxidant capacity of each of the 4 AKEs was evaluated by assessing their conversion rate of $Cu^{2+}$ to $Cu^+$. The content of chlorogenic acid and 3,5-di-O-caffeoylquinic acid, the bioactive compounds in AKE, in each extract were analyzed by high performance liquid chromatography (HPLC). The AKEs showed potent ${\alpha}$-glucosidase inhibitory activity with mixed inhibition mode, and significant antioxidant capacity. Conclusions: These results of this study suggested that the AKEs tested had ${\alpha}$-glucosidase inhibitory and antioxidant effects. Among the extracts, the 80% ethanol extract showed the most significant ${\alpha}$-glucosidase inhibitory activity, with a half maximal inhibitory concentration ($IC_{50}$ value) of $1.65{\pm}0.36mg/m{\ell}$ and a half maximal effective concentration ($EC_{50}$ value) for its antioxidant activity of $0.42{\pm}0.10mg/m{\ell}$. It can therefore be used as a source of therapeutic agents to treat diabetes patients.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.102-102
• /
• 2018

Electronic industry had required the finer size and the higher performance of the device. Therefore, 3-D die stacking technology such as TSV (through silicon via) and micro-bump had been used. Moreover, by the development of the 3-D die stacking technology, 3-D structure such as chip to chip (c2c) and chip to wafer (c2w) had become practicable. These technologies led to the appearance of HBM (high bandwidth memory). HBM was type of the memory, which is composed of several stacked layers of the memory chips. Each memory chips were connected by TSV and micro-bump. Thus, HBM had lower RC delay and higher performance of data processing than the conventional memory. Moreover, due to the development of the IT industry such as, AI (artificial intelligence), IOT (internet of things), and VR (virtual reality), the lower pitch size and the higher density were required to micro-electronics. Particularly, to obtain the fine pitch, some of the method such as copper pillar, nickel diffusion barrier, and tin-silver or tin-silver-copper based bump had been utillized. TCB (thermal compression bonding) and reflow process (thermal aging) were conventional method to bond between tin-silver or tin-silver-copper caps in the temperature range of 200 to 300 degrees. However, because of tin overflow which caused by higher operating temperature than melting point of Tin ($232^{\circ}C$), there would be the danger of bump bridge failure in fine-pitch bonding. Furthermore, regulating the phase of IMC (intermetallic compound) which was located between nickel diffusion barrier and bump, had a lot of problems. For example, an excess of kirkendall void which provides site of brittle fracture occurs at IMC layer after reflow process. The essential solution to reduce the difficulty of bump bonding process is copper to copper direct bonding below $300^{\circ}C$. In this study, in order to improve the problem of bump bonding process, copper to copper direct bonding was performed below $300^{\circ}C$. The driving force of bonding was the self-annealing properties of electrodeposited Cu with high defect density. The self-annealing property originated in high defect density and non-equilibrium grain boundaries at the triple junction. The electrodeposited Cu at high current density and low bath temperature was fabricated by electroplating on copper deposited silicon wafer. The copper-copper bonding experiments was conducted using thermal pressing machine. The condition of investigation such as thermal parameter and pressure parameter were varied to acquire proper bonded specimens. The bonded interface was characterized by SEM (scanning electron microscope) and OM (optical microscope). The density of grain boundary and defects were examined by TEM (transmission electron microscopy).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.6
• /
• pp.1215-1219
• /
• 2001

The present study was conducted to investigate effect of powdered herb of Aster scaber Thunb. (chamchwi) on antioxidant system in ethanol-administrated rats. Four week-old Sprague Dawley male rats which had initial body weights of 97.10$\pm$4.50 g were randomly divided into three groups: control (ethanol treated, vitamin E-deficient group); 5% chamchwi (ethanol-treated, 5% chamchwi powder-supplemented group): 10% chamchwi (ethanol-treated, 10% chamchwi powder-suplemented group). Three groups of rats were suplemented with three experimental diets for 4 weeks and orally administrated 10% ethanol (v/v) daily via drinking water in the last experimental week. Contents of TBARS (thiobarbituric acid reactive substance). glutathione in liver and kidney and serum albumin were determined. The activities of superoxide dismutase (SOD), catalase and glutathione peroxidase (GSH-px) in liver and kidney were also analyzed. Relative weight of liver and spleen to body in chamchwi groups was lower than that in control group (p<0.05). The most remarkable result was that liver TBARS contents in chamchwi groups (5% chamchwi group, 46 $\mu\textrm{g}$ in MDA value; 10% chamchwi group, 35 $\mu\textrm{g}$) were significantly lower (p<0.05) than that in control group (66 $\mu\textrm{g}$). The supplement of chamchwi powder lowered the activity of manganese- superoxide dismutase (Mn-SOD), catalase in liver and GSH-px in kidney. The levels of glutathione in liver and kidney and serum albumin were not significantly different in all experimental groups (p<0.05). These results indicate that powdered herb of Aster scaber decreases lipid peroxidation and acitvity of Mn-SOD increased by alcohol-induced oxidative stress in liver of rats.

• Journal of Life Science
• /
• v.24 no.6
• /
• pp.603-611
• /
• 2014

The lectins were separated from Korean and Chinese mung bean seeds finally via chromatography using Sephadex G-100 and their biochemical features were studied and compared. They showed no hemagglutination with human red blood cells regardless of trypsin treatment and showed hemagglutination with only trypsin treated rabbit red blood cells. The molecular weights of two lectins were identified as 54 kDa and 28 kDa by SDS-PAGE. It was found that while the optimal reaction temperature of the lectin from Korean mung bean was $60^{\circ}C$, that of the lectin from Chinese mung bean seeds was $50^{\circ}C$. It was found also that the most thermal stable temperature of the seed lectin from Korean mung bean seeds was $50^{\circ}C$ and the lectin from Chinese mung bean was $40-50^{\circ}C$. The lectin from Korean mung bean seeds showed the highest activity at pH 3.2 and the lectin from Chinese mung bean showed the highest activity at pH 6.2. It was identified that when treating a denaturant, thiourea and guanidine-HCl resulted in no hemagglutination, so they induced denaturalization. It was identified also that there was no hemagglutination with urea, so it did not induced denaturalization. They showed no septicity to 6 types of carbohydrates including D-glucose. In addition, the lectins from the two mung bean seed had specificity to metal ions.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.2
• /
• pp.37-43
• /
• 1999

Modules of the system that requires large capacity and high-speed information processing are implemented in the form of MCM that allows high-speed data processing, high density circuit integration and widely applied to such fields as ATM, GPS and PCS. Hence we developed the ATM switching module that is consisted of three chips and 2.48 Gbps data throughput, in the form of 10 multi-layer by Cu/Photo-BCB and 491pin PBGA which size is $48 \times 48 \textrm {mm}^2$. hnologies required for the development of the MCM includes extracting parameters for designing the substrate/package through the interconnect characterization to implement the high-speed characteristics, thermal management at the high-density MCM, and the generation of the testability that is one of the most difficult issues for developing the MCM. For the development of the ATM Switching MCM, we extracted signaling delay, via characteristics and crosstalk parameters through the interconnect characterization on the MCM-D. For the thermal management of 15.6 Watt under the high-density structure, we carried out the thermal analysis. formed 1.108 thermal vias through the substrate, and performed heat-proofing processing for the entire package so that it can keep the temperature less than $85^{\circ}C$. Lastly, in order to ensure the testability, we verified the substrate through fine pitch probing and applied the Boundary Scan Test (BST) for verifying the complex packaging/assembling processes, through which we developed an efficient and cost-effective product.

• The Korean Journal of Physiology and Pharmacology
• /
• v.4 no.1
• /
• pp.33-40
• /
• 2000

This study was designed to clarify the mechanism of the inhibitory action of a nitric oxide (NO) donor, 3-morpholino-sydnonimine (SIN-1), on contraction, cytosolic $Ca^{2+}$ level $([Ca^{2+}]_i)$ and ionic currents in guinea-pig ileum. SIN-1 $(0.01{\sim}100\;{\mu}M)$ inhibited 25 mM KCl- or histamine $(10\;{\mu}M)-induced$ contraction in a concentration-dependent manner. SIN-1 reduced both the 25 mM KCl- and the histamine-stimulated increases in muscle tension in parallel with decreased $[Ca^{2+}]_i.$ Using the patch clamp technique with a holding potential of -60 mV, SIN-1 $(10\;{\mu}M)$ decreased peak Ba currents $(I_{Ba})$ by $30.9{\pm}5.4%$ (n=6) when voltage was stepped from -60 mV to +10 mV and this effect was blocked by ODQ $(1\;{\mu}M),$ a soluble guanylyl cyclase inhibitor. Cu/Zn SOD (100 U/ml), the free radical scavenger, had little effect on basal $I_{Ba},$ and SIN-1 $(10\;{\mu}M)$ inhibited peak $I_{Ba}$ by $32.4{\pm}5.8%$ (n=5) in the presence of Cu/Zn SOD. In a cell clamped at a holding-potential of -40 mV, application of $10\;{\mu}M$ histamine induced an inward current. The histamine-induced inward current was markedly and reversibly inhibited by $10\;{\mu}M$ SIN-1, and this effect was abolished by ODQ $(1\;{\mu}M).$ In addition, SIN-1 markedly increased the depolarization-activated outward $K^+$ currents in the all potential ranges. We concluded that SIN-1 inhibits smooth muscle contraction mainly by decreasing $[Ca^{2+}]_i$ resulted from the inhibition of L-type $Ca^{2+}$ channels and the inhibition of nonselective cation currents and/or by the activation of $K^+$ currents via a cGMP-dependent pathway.

• Polymer(Korea)
• /
• v.33 no.2
• /
• pp.158-163
• /
• 2009

In this study, we synthesized a series of dendritic polystyrene-b-linear poly (t-butyl acrylate) copolymers with well-defined molecular architectures. The hydroxyl group located at the focal point of the second generation dendron bearing polystyrene ($M_n$ = 1000 g/mol) peripheries was converted into amine group via the following stepwise reactions: 1) tosylatoin, 2) azidation, and 3) reduction. On the other hand, the linear poly (t-butyl acrylate)s were prepared by an atom transfer radical polymerization (ATRP) of t-butyl acrylate where benzyl 2-bromopropanoate and Cu(I)Br/PMDETA were used as initiator and catalyst, respectively. To convert the end group of prepared poly (t-butyl acrylate) s into carboxylic acid, a debenzylation was performed using Pd/C catalyst under $H_2$ atmosphere. In the final step, dendritic-linear block copolymers were obtained through a simple amide coupling reaction mediated by 4-(dimethylamino) pyridine(DMAP) and N,N'-diisopropylcarbodiimide(DIPC). The resulting diblock copolymers were shown to have well-defined molecular weights and narrow molecular weight distributions as supported by $^1H$-NMR spectroscopy and gel permeation chromatography(GPC).