• Korean Journal of Heritage: History & Science
• /
• v.53 no.1
• /
• pp.150-167
• /
• 2020

The purpose of this paper is to share the status and introduce a scientific analysis of the GeumguJagi (gilt-silver overlay porcelain, 金釦瓷器) excavated from Seongneung (石陵). This analysis aimed to highlight the GeumguJagi excavated from the Royal Tombs of Goryeo with a clear lower year (1237) and to aid research into the GeumguJagi. In 2001, the National Institute of Cultural Heritage excavated and investigated Seongneung in Heejong (熙宗). Various artifacts such as celadon, gold, bronze, and iron products were collected from the chambers inside of the tomb. There were a total of 160 celadon items including bowls, dishes, glasses, and saucers. Of those, there were 58 celadon items (including fragments) with metal frames on the openings. These consisted of bowls, plates, lids, and saucers. Until recently, in various exhibitions and papers, only one GeumguJagi was known to have been excavated from Seongneung, which was a . However, the survey identified a number of further GeumguJagis. It had been understood from inherited and excavated products that the materials used for ornaments were restricted to high-quality celadon. However, this study confirmed that the excavation of Seongneung demonstrated the use of various other materials for different models and qualities of GeumguJagis. It can be said that it is characteristic that various models and quality are confirmed together through the excavation of Seongneung. A scientific analysis was carried out that selected 12 of 58 products excavated from Seongneung. Results showed that the main component used for Geumgu ornaments was tin (Sn), and trace amounts of copper (Cu) and lead (Pb) were also commonly identified. When analyzing the material used to affix the metal fittings, this was found to be glue (膠) made from animal skins, muscle, and bones. This pattern matches that of the GeumguJagi excavated from Paju Hyeeumwonji, and the reason for this could be assumed on the basis of the contents of the 『Cheongonggaemul (天工開物)』 written by Song Ongsung (宋應星) during the Ming Dynasty. At that time, metals such as tin and copper would have been difficult to obtain. 『Xuānhwafengshi Gaolitujing (宣和奉使高麗圖經)』 shows that the use of metal was limited to certain classes; thus, the use of the GeumguJagi seems to have been centered around the royal family.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.3
• /
• pp.190-198
• /
• 2008

There is an increasing concern over heavy metal contamination of paddy soils and the subsequent translocation of heavy metals to rice. Objective is to monitor the status and long-term trend of heavy metal contamination in paddy soils, periodically. In 2007 survey, the average concentrations of As(arsenic), Cd(cadmium), Cu(copper), Ni(nickel), Pb(lead), and Zn(zinc) in 2,010 paddy soils nationwide were 0.87, 0.08, 3.33, 1.19, 4.95 and $4.67mg\;kg^{-1}$, respectively. Few sites, which were contaminated by As in 2003 and 2007 survey and by Ni in 1999 and 2007 survey, were over the threshold level for soil contamination designated by the Soil Environmental Conservation Act in Korea. Long-term change was shown that As, Ni, and Zn were gradually increased whereas Cd and Cu were decreased. In the distribution of extractable heavy metal contents, the modes of each heavy metal content were similar with the average contents of each heavy metals. Mean value of heavy metals except copper in paddy soils was higher than median value. It means that the downward distribution of heavy metal content in paddy rice was shown against normal distribution.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.5
• /
• pp.323-332
• /
• 2003

This study was carried out to provide information for the present status of soil pollution near abandoned old-zinc mining area through analysis of bound form and 0.1 N-HCl extractable concentrations of heavy metals in soils and plants. Feasibility of endemic plants for phytoremediation was evaluated by the investigation of vegetation in soils. Cd contents of the selected samples near old-zinc mining soils ranged from 0.2 to $42mg\;kg^{-1}$. Nonagricultural soils near the mining area contained great amounts of Zn, Pb, Cd, and Cu than the paddy and upland soils. Some Korean wild plants, Artemisia princeps, Artemisia montana, Erigeron canadensis, and Pueraria thunbergiana, were found to grow vigorously in the studied area. Among them, Artemisia princeps was selected as a possible phytoremediator for cleaning heavy metal contaminated soils. Artemisia princeps contained about 43 and $52mg\;kg^{-1}$ of Cd in their root and shoot as dry weight, respectively. Average contents of Cd in the rhizosphere soil, $15.68mg\;kg^{-1}$, was slightly higher than the soil-root interface soils, $14.1mg\;kg^{-1}$. Sequential extraction of Cd contaminated soils showed that average $2.4mg\;kg^{-1}$ (about 7%) of cadmium existed as exchangeable form and the average amounts increased as follows : adsorbed < organically bound < exchangeable << oxide carbonate << sulfide residual fractions. Amendment of organic by-product fertilizer in metal-contaminated soils promoted the growth of roots significantly as compared with the other treatments containing chemical fertilizer.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.1
• /
• pp.54-63
• /
• 2019

As a part of the national marine ecosystem monitoring program, the temporal and spatial variation of sedimentary environment and pollution of organic matters and trace metals from four major tidal flats, i.e., Ganghwa Is., Garolim bay, Jeung Is., Suncheon bay, was investigated for 3 yerars from 2015 to 2017. The mean grain size of the sediment was $5.0-5.3{\varnothing}$ at Ganghwa Is, $4.5-4.8{\varnothing}$ at Garolim bay, $6.1-6.5{\varnothing}$ at Jeung Is, and $8.6-8.7{\varnothing}$ at Suncheon bay. The mean grain size (Mz) tended to decrease from the north (Ganghwa Is.) to the south (Suncheon bay). The ignition loss (IL) was 15.5% in Suncheon bay in 2015, which was relatively high compared to other sites, but gradually decreased over time from 8.3% in 2016 to 7.0% in 2017. In Jeung Is. and Suncheon bay, the concentration of Zn and As exceeded the threshold effect level (TEL) at some stations, but the range of trace metals in the other sites was below the level. In Jeung Is., the Mz and concentration of trace metals except Hg was positively correlated (r= 0.40-0.88, P<0.05). On the other hand, Mz was negatively correlated with trace metals (P<0.05) in Suncheon bay. The geoaccumulation index ($I_{geo}$) to evaluate contamination status of sediments for trace metal was less than 1(not contaminated) for Cu, Zn, Pb, Cd and Hg, and 2-3 (moderately to strongly polluted) for As at several stations in Suncheon bay and Jeung Is.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.4
• /
• pp.351-357
• /
• 2000

This study was carried out to find out characteristics and contamination status of the urban-forest soils. Both topsoil (0-20 cm) and subsoil (40-60 cm) samples were collected from Namsan, Changdeok-palace, Seongjusan and Odaesan (control). The samples were analyzed for physicochemical properties, heavy metal (Cd, Cu, Pb, Zn) and anion $(NO_3\;^-,\;SO_4\;^{2-})$ contents. Soil pH of Odaesan was the highest followed by Namsan, Changdeok-palace and Seongjusan. The anion concentrations of the soil samples were in the order of Namsan, Seongjusan > Changdeok-palace > Odaesan. The relationships between soil pH and the anion concentrations showed highly significant negative correlation, which indicated acidification of soil due to air pollutants such as $NO_3\;^-$ and $SO_4\;^{2-}$ was going on. The heavy metal contents of the soils of urban-forest were higher than those of control. Heavy metal contents in the topsoil were higher than those in the subsoil. Since urban-forest soils were quite vulnerable to acidification and heavy metal accumulation due to chronic exposure to air pollutants such as automobile exhaust, a comprehensive countermeasure not to deteriorate urban-forest ecology must be prepared in the near future.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2001.11a
• /
• pp.7-7
• /
• 2001

The increasing interest in light weight materials coupled to the need for cost -effective processing have combined to create a significant opportunity for aluminum P/M. particularly in the automotive industry in order to reduce fuel emissions and improve fuel economy at affordable prices. Additional potential markets for Al PIM parts include hand tools. Where moving parts against gravity represents a challenge; and office machinery, where reciprocating forces are important. Aluminum PIM adds light weight, high compressibility. low sintering temperatures. easy machinability and good corrosion resistance to all advantages of conventional iron bm;ed P/rv1. Current commercial alloys are pre-mixed of either the AI-Si-Mg or AL-Cu-Mg-Si type and contain 1.5% ethylene bis-stearamide as an internal lubricant. The powder is compacted in closed dies at pressure of 200-500Mpa and sintered in nitrogen at temperatures between $580~630^{\circ}C$ in continuous muffle furnace. For some applications no further processing is required. although most applications require one or more secondary operations such as sizing and finishing. These sccondary operations improve the dimension. properties or appearance of the finished part. Aluminum is often considered difficult to sinter because of the presence of a stable surface oxide film. Removal of the oxide in iron and copper based is usually achieved through the use of reducing atmospheres. such as hydrogen or dissociated ammonia. In aluminum. this occurs in the solid st,lte through the partial reduction of the aluminum by magncsium to form spinel. This exposcs the underlying metal and facilitates sintering. It has recently been shown that < 0.2% Mg is all that is required. It is noteworthy that most aluminum pre-mixes contain at least 0.5% Mg. The sintering of aluminum alloys can be further enhanced by selective microalloying. Just 100ppm pf tin chnnges the liquid phase sintering kinetics of the 2xxx alloys to produce a tensile strength of 375Mpa. an increilse of nearly 20% over the unmodified alloy. The ductility is unnffected. A similar but different effect occurs by the addition of 100 ppm of Pb to 7xxx alloys. The lend changes the wetting characteristics of the sintering liquid which serves to increase the tensile strength to 440 Mpa. a 40% increase over unmodified aIloys. Current research is predominantly aimed at the development of metal matrix composites. which have a high specific modulus. good wear resistance and a tailorable coefficient of thermal expnnsion. By controlling particle clustering and by engineering the ceramic/matrix interface in order to enhance sintering. very attractive properties can be achicved in the ns-sintered state. I\t an ils-sintered density ilpproaching 99%. these new experimental alloys hnve a modulus of 130 Gpa and an ultimate tensile strength of 212 Mpa in the T4 temper. In contest. unreinforcecl aluminum has a modulus of just 70 Gpa.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.3
• /
• pp.357-365
• /
• 2002

A survey was under taken of six district of Northern India viz. Bareilly, Pilibhit, Udham Singh Nagar, Nainital, Almora and Rampur. The age, breed, sex and physiological status recorded. A total number of 854 cattle examined out of which lactating (274 cases), non lactating (302 cases) heifers (128 cases), calves (82 cases) and adult male (68 cases) were examined. An incidence of 4.92 percent (42) of microfilarisis was recorded. The highest prevalence was observed in Rudrapur District of Udham Singh Nagar (33.33%, 4/12), followed by Lalkaun in Nanital District (21.74%, 10/46), Rampur (12.50%, 2/16), Bareilly (8.16%, 8/98) and Pilibhit (1.22%, 1/82). No infection was observed in Almora region. Amongst 854 cattle of different group incidence was highest in adult male (12.20%, 10/82), followed by non lactating (3.82%, 12/314) and lactating (2.70%, 2/74), (7.64%, 12/157) was found in Heifers. For haemeto-biochemical, serum minerals estimations and therapeutic study 32 animals suffering from filariasis and 18 healthy animals were taken. 16 animals were treated with ivermectin $@200{\mu}g/kg $ body weight. Effect of this disease on production has also been estimated for which body weight and milk production was observed. The main clinical manifestations observed were anaemia, loss of appetite, debility, oedematous swelling especially in the abdominal region, increased heart rate, and respiration rate. Haematological changes indicated decrease in hemoglobin, total erythrocyte count, packed cell volume, erthrocyte fragility and neutrophil, whereas there was significant increase in erythrocytes sedimentation rate (ESR), total leukocyte count (TLC), lymphocyte and eosinophils. Biochemical changes showed significant reduction in the values of serum albumin, A : G ratio, where as there was significant increase in blood glucose, blood urea nitrogen (BUN), globulin, total lipid, total cholesterol, phospholipids, serum bilirubin. Serum mineral profile also altered markedly, which indicate a significant decrease in Ca, Cu, Fe, Zn, and Mn with increase value of Na and Cl. There was no significant change in P and K values. Enzyme pattern in micro filaria infected animal indicated increased level of AST, ALT, alkaline phosphatase, ornithine carbamyl transferase, sorbitol dehydrogenase, glutamate dehydrogenase, isocitric dehydrogenase and lactate dehydrogenase. In blood gas values and acid/base balance, there was an increase in $PVCo_2$ and $PVo_2$. It has been observed that microfilaria infected cattle showed decrease in body weight and milk production. Animal treated with ivermectin showed the return of these above values toward normalcy.

• Progress in Superconductivity
• /
• v.6 no.1
• /
• pp.74-78
• /
• 2004

YBCO coated conductor is one of the most promising materials as a new generations wire especially for practical power applications. In this work, $YBa_2$$Cu_3$$O_{7}$ -$\delta$/(YBCO) coated conductors (CC) were deposited by pulsed laser deposition (PLD) from buffer layers to superconducting layer on hi-axially textured metal tape. The oxide multilayer buffered substrate of architectures of $CeO_2$/$YSZ/Y_2$$O_3$ was fabricated by PLD at steady status. Then YBCO layer was deposited on RABiTS substrate by stationary and reel-to-reel (R2R) continuous process and we compared with deposition conditions of both processes. The degree of texture of each layer was investigated using X-ray diffraction including $\theta$-2$\theta$ scans, $\omega$-scans and $\Phi$-scans analysis. Their surface morphology was observed by scanning electron microscopy (SEM). The FWHM of the X-ray $\Phi$-scans and $\Phi$-scans indicated that YBCO and buffer layers closely replicate the in-plane and out-of-plane texture of metal tape. Critical current (Ic) at 77 K, self-field of 75.8 A/cm-width, critical temperature (Tc) of 85 K, and critical current density (Ic) of 3.7 MA/$\textrm{cm}^2$ were measured from coated conductor deposited by stationary process. And coated conductor deposited by R2R continuous process had Ic of 57.5 A/cm-width, Tc of 86.5 K and Jc of 2.0 MA/$\textrm{cm}^2$. The film also exhibits a homogeneous and dense surface morphology.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.4
• /
• pp.293-299
• /
• 2016

The chemical properties of paddy fields in Gangwon province were monitored every 4 years from 2003 to 2015 in order to provide basic information for soil fertility management of paddy fields. In 2015, the soil chemical properties of paddy fields were 5.9 in pH, $22g\;kg^{-1}$ in organic matter (OM), and $123mg\;kg^{-1}$ in available (Avail.) phosphate $P_2O_5$. Exchangeable (Exch.) potassium (K), calcium (Ca) and magnesium (Mg) were 0.39, 4.8 and $0.9cmolc\;kg^{-1}$, respectively, and Avail. $SiO_2$ was $170mg\;kg^{-1}$. In the long-term analysis, the contents of Avail. $SiO_2$, Exch. K and pH of paddy soils showed increasing tendency. However, Avail. $P_2O_5$, Exch. Ca and Mg tended to decrease, and there were no significant changes in the contents of OM. Soil OM, Avail. $P_2O_5$ and $SiO_2$ were not different among the different topographical sampling sites. However, the mean value of Exch. K and Ca were different among the different topographical sampling sites, and exceeded optimal values in the fluvio-marine plains. Different soil texture resulted in different soil pH, while no difference for OM, Avail. $P_2O_5$ and $SiO_2$. Paddy soil samples within appropriate pH range increased from 65% in 2003 to 77% in 2007, 68% in 2011, and 71% in 2015. In case of Avail. $SiO_2$, soil samples within appropriate range increased from 20% in 2003, to 37% in 2007, 29% in 2011, and 45% in 2015. Meanwhile, Cd and Pb were distributed to less than 5% of soil pollution standards. Cu, As and Zn were distributed to less than 10%, 15% and 20%, respectively. Therefore, paddy soil in Gangwon Province was judged to be safe. As a result, paddy fields with more or less in nutrient level need to be fertilized based on the soil analysis. And the application of silicate fertilizer is strongly recommended to those of paddy fields in need. In addition, soil management including the cultivation of green manure crop or application of rice straw is necessary to increase the organic matter content of paddy soil.

• Journal of Environmental Health Sciences
• /
• v.43 no.3
• /
• pp.233-239
• /
• 2017

Objectives: The pollution status of heavy metals within the soil was investigated with an aim to establishing a sustainable soil environment within parks and amusement facilities installed in urban areas of Gyeonggi-do Province. Methods: As sampling sites, 14 locations were selected from a city with a number of factories near a residential area, a residential area, and a children's park in a city with mixed green areas. Seven kinds of heavy metals, including Cd, Pb, and Hg, and the pH of soil were analyzed three times by inductively coupled plasma optical emission spectroscopy (ICP-OES) and atomic absorption spectrometer (AAS). Results: In this study, the pH of the samples from the residential park and industrial park showed 5.7-6.5 and 5.9-7.0, respectively. The overall mean concentration (mg/kg) of heavy metals was Zn (132.8), Ni (73.0), Cu (47.4), Pb (35.9), As (4.84), Cd (0.39), and Hg (0.07), indicating that these concentrations of heavy metals were lower than those for the area 1 standard of soil pollution concern criteria. In addition, the sampling sites in the residential area and the industrial area also showed the same tendency for concentration distribution. Conclusions: We found that the soil pollution class (SPC) of some spots were over 200, which are third and fourth classes. In order to manage a sustainable soil environment in a city park, it is suggested that local governments, the management bodies for these parks, need to manage, supervise, and investigate soil pollution and quickly replace contaminated soil.